Hertz Mille ML1650.3 Legend TECHNICAL SPECIFICATIONS

ML 1650.3
COMP WOOFER
250 W
www.hertzaudiovideo.eu
TECHNICAL SPECIFICATIONS
Component Woofer Woofer size mm (in.) 165 (6.5) Voice Coil Ø mm (in.) 36 (1.4) Power Handling W peak 250
Continuous 125
Impedance Ω 4 Frequency Response Hz 40 ÷ 6.5k Magnet size mm 80 x 45 x 5
D x d x h (in.) Centre to centre distance mm (in.) 156 (6.14) Hole diameter/ mm (in.) 5 (0.2)
Eyelet dimensions mm (in.) ­Weight of one speaker kg (lb) 1,29 (2.84) Magnet Neodymium Dome/Cone Pressed-pulp cone with cotton fibres
*Xmech mm (in.) ±9 (0.35) *X-mech: maximum mechanical excursion it indicates the motion range
in the speaker linear functioning area, in both ways.
(3.15 x 1.77 x 0.2)
ELECTRO-ACOUSTIC PARAMETERS
D mm 132 Xmax mm ±5 Re Ω 3,3 Fs Hz 65 Le mH 0,24 Vas l 8,3 Mms g 17,5 Cms mm/N 0,3 BL T•m 7 Qts 0,47 Qes 0,52 Qms 5,3 Spl dB 93
1. Neodymium magnet optimized with FEA simulations for real dynamics and utmost control.
2. Very low carbon content CNC machined plates, for maximum magnetic permeability
and low distortion at high power levels.
3. Aluminium covered pole for a linear impedance modulation and low distortion.
handling and compression-free re production even in the most demanding musical passages.
5. Exponential V-cone® with optimized geometry for utmost linearity and dispersion at mid frequency range.
6. “Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.
7. Pressed-pulp cone with cotton fibres, combining stiffness and lightweight, to
achieve wide frequency response and limited break-ups at high frequency.
8. Three-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.
9. CNC machined elegant diamond-cut basket edge featuring the Hertz logo.
10. Die-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.
A 165 mm 6.5 in. B 141 mm 5.55 in. C 80 mm 3.15 in. D 69 mm 2.71 in. E 170 mm 6.7 in. F 26 mm 1.02 in.
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it
B A
C
D
E
F
All Specifications Subject to Change Without Notice_16.A
17
Loading...