Rev. 11/2011
No. HS5-1.00
with SIDE SPLASHES & P-TRAP
16" WIDE WALL MOUNT HAND SINK
INSTALLATION INSTRUCTIONS for HS-5
hook up water inlet leads (not provided)
locknut below. Make sure top of drain is below surface to allow
proper drainage.
Krowne Metal Corporation
100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129
sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal
INCLUDES:
(A) HAND SINK with SIDE SPLASHES
(B) BACKSPLASH WALL MOUNT FAUCET
(C) WALL MOUNT BRACKET
(D) P-TRAP
1. Install FAUCET (B) on HAND SINK with SIDE SPLASHES (A) and
2. Hang HAND SINK with SIDE SPLASHES (A) on WALL BRACKET (C).
3. Install Drain with plumbers putty on top and the rubber washer &
4. Hook up water and drain line with P-TRAP (D).
Printed in the USA