Henny Penny HMR-104 Specifications

PROJECT QUANTITY ITEM NO

Heated merchandisers

Full-serve, self-serve or combination

General Information

Henny Penny HMR heated merchandisers are designed to provide the ultimate in flexibility and performance for displaying and serving fresh hot foods. The HMR series is a modular system that lets the operator pick and choose the size, style and configuration of fullserve and self-serve heated modules.

In addition, four different front glass profiles are available to help you match existing cases.

4-well heated merchandiser, model HMR-104. Configuration shown: All self-serve.

All full-serve modules feature Henny Penny’s unique THERMA-

Even Heat Process that holds

VEC food at precise temperatures and keeps glass from fogging for a more appetizing display. Upper and lower

MODEL HM

-104 4 well

heating is independently controlled.

The HMR merchandisers can be

ordered as:

• All full-serve

• All self-serve

• Custom combination of full and

self serve sections in modules of two or more adjacent wells that add up to four. (See separate Data Sheets for other sizes.)

Merchandiser bases are available in Profile or Pedestal styles in several heights and colors. (See separate Data Sheet.)

Standard Features

• Stainless steel interior and exterior construction, tempered front and side panel glass and doors.

• Choose from four glass profiles:

 Henny Penny curved  Henny Penny straight  Vision (matches Hussmann

 Advantage (matches Tyler

• Exclusive THERMA-VEC

Vision

series)

Advantage

series.)

Even Heat Process holds food at precise temperatures with no fogging.

• Independent controls over each well for upper radiant heat and food probe temperature display.

• Lower heat and water pan heat independently controlled.

• Control settings can be locked to

prevent accidental changes.

• Humidified operation with built-in low-water indication.

• Separate switches for power and lights.

• Brilliant halogen lamps for attractive food presentation.

• Front glass lifts easily for cleaning and closes gently on gas springs.

• Mirrored or clear side glass. (CE units are only available with clear side glass.)

• Removable sliding rear doors with mirrored glass.

• Fold-down wood or plastic cutting board.

• Units are shipped with adjustable pan supports, food temperature probes, and a water pan.

 APPROVED  APPROVED AS NOTED  RESUBMIT

Accessories available separately

• Modular system of wire shelves and guide rails that offer “two-tier” capacity for various HMR configurations:

 Wire shelf—three-well section  Wire shelf—two-well section  Pan support with guide rail

Henny Penny Corporation

AUTHORIZED SIGNATURE DATE

PO Box 60 Eaton OH 45320 USA

+1 937 456.8400 800 417.8417 +1 937 456.8434 Fax 800 417.8434 Fax

www.hennypenny.com

PROJECT ITEM NO

Heated merchandisers

Full-serve, self-serve or combination

Available glass profiles:

Henny Penny Curved

37 in. (938 mm)

56 1/4 in. (1429 mm)

Dimensions

Length: 56 ¼ in. (1429 mm) Depth: 37 in. (938 mm) Henny Penny Curved 39 ¾ in. (1011 mm) Henny Penny Straight 37 ¾ in. (959 mm) Hussmann Vision 37 ½ in. (952 mm) Tyler Advantage Height: 31 3/8 in. (796 mm)

Required clearances

Top: 15 in. (381 mm) for raised front glass. Back: 9 in. (229 mm) for cutting board

Crated dimensions

Length: 62 ¾ in. (1924 mm) Depth: 48 ¾ in. (1238 mm) Height: 40 in. (1016 mm) Volume: 71 cu. ft. (1.98 m³)

Net weight N/A Crated weight 440 lbs. (200 kg). May vary with selections.

Capacity

Full-serve Per well

(1) full-size pan

(1) third-size pan up to 4 in. (102 mm) depth. Self-serve Insert 2-well area 26 ¾ x 24 ¾ in. (679 x 628 mm)

4-well area 26 ¾ x 49 ½ in. (679 x 1257 mm) Specify depth: Flat, 3/8 in. (10 mm), or 2 in. (51 mm)

Henny Penny Straight

39 3/4 in. (1011 mm)

31 3/8 in. (796 mm)

Vision Matches Hussmann Vision®

37 3/4 in. (959 mm)

Laboratory certifications

Electrical: All units are 50/60 Hz.

Configuration Volts Phase Low

2S/2F*

*Well modules can be arranged in opposite order.

Power cord and plug included for Canada or USA destination:

120/208V 1Ph 120/240V 1Ph

120/208V 3Ph NEMA L21-20P

All other electrical configurations must be hardwired at installation.

MODEL HM

Advantage Matches Tyler Advantage®

37 1/2 in. (952 mm)

-104 4 well

High

Watts/Amps

120/208 1 2765 13.3 3765 18.1 3+G 120/240 1 2765 11.5 3947 16.4 3+G 220-240 1 3199 13.3 4380 18.2 2+G 120/208 3 2765 9.2 3765 11.1 4+G 120/240 3 2765 8.2 3947 10.1 4+G 380-415 3 3199 5.4 4380 6.8 3NG

120/208 1 3341 16.1 4341 20.9 3+G 120/240 1 3377 14.1 4558 19.0 3+G 220-240 1 3810 15.9 4991 20.8 2+G 120/208 3 3341 9.9 4341 13.0 4+G 120/240 3 3377 8.7 4558 12.3 4+G 380-415 3 3810 5.4 4991 7.8 3NG

120/208 1 3253 15.6 4253 20.4 3+G 120/240 1 3289 13.7 4470 18.6 3+G 220-240 1 3722 15.5 4903 20.4 2+G 120/208 3 3253 9.5 4253 12.6 4+G 120/240 3 3289 8.4 4470 12.0 4+G 380-415 3 3722 5.4 4903 7.8 3NG

NEMA L14-30P

Wire

Bidding Specifications See separate page

Continuing product improvement may subject specifications to change without notice.

www.hennypenny.com