Page 1
Model HMI-103/105
SECTION 3. PARTS INFORMATION
3-1. INTRODUCTION This section lists the replaceable parts of the Henny Penny Island
Warmer.
3-2. GENUINE P ARTS Use only genuine Henny Penny parts in your warmer . Using a part
of lesser quality or substitute design may result in damage to the
unit or personal injury .
3-3. WHEN ORDERING Once the parts that you want to order have been found in the
PARTS parts list, write down the following information:
(Sample)
Item Number 3
Part Number 39795
Description Lamp Holder
From the data plate, list the following information:
(Sample)
Product Number HMI105.0
Serial Number 0001
Voltage 120/208
3-4. PRICES Y our distributor has a price parts list and will be glad to
inform you of the cost of your parts order .
3-5. DELIVERY Commonly replaced items are stocked by your distributor and
will be sent out when your order is received. Other parts will be
ordered, by your distributor, from Henny Penny Corporation.
Normally , these will be sent to your distributor within three
working days.
3-6. WARRANTY All replacement parts (except lamps and fuses) are warranted for
90 days against manufacturing defects and workmanship. If
damage occurs during shipping, notify the carrier at once so that
a claim may be properly filed. Refer to warranty in the front of
this manual for other rights and limitations.
3-7. RECOMMENDED
SPARE P ARTS FOR
DISTRIBUTORS
Recommended replacement parts, stocked by your distributor, are
indicated with
√√
√ in the parts lists. Please use care when ordering
√√
recommended parts, because all voltages and variations are
marked. Distributors should order parts based upon common
voltages and equipment sold in their territory .
206 3-1
Page 2
Model HMI-103/105
Figure 3-1. Terminal Block
FIG . &
ITEM NO. PAR T NO. DESCRIPTION HMI-103 HMI-105
1 MS01-382 NYLON RECEPT ACLE 2 2
2 ME50-013 SPACER 4 4
√√
√ 3 48122 HIGH LIMIT 2 2
√√
4 ME50-023 STANDOFF 4 4
5 34924 TERMINAL BLOCK ASSY. ( 3 PHASE ) 1 1
5 34925 TERMINAL BLOCK ASSY. ( 1 PHASE ) 1 1
6 NS02-006 NUT 2 2
√√
√ recommended parts
√√
3-2 206
Page 3
Model HMI-103/105
Figure 3-2. Upper Heat
FIG . &
ITEM NO. PAR T NO. DESCRIPTION HMI-103 HMI-105
1 45683 CANOPY SHIELD - 1
1 45761 CANOPY SHIELD 1 2 46007 LIGHT REFLECTOR 6 10
3 46009 HEAT REFLECTOR 6 10
4 SC04-003 SCREW 4 4
√√
√ 5 39795 LAMP HOLDER 12 20
√√
√√
√ 6 BL01-006 BULB - 67W - TEFLON COATED - 120V 12 20
√√
√√
√ 6 BL01-013 BULB - 67W - TEFLON COATED - 240V 12 20
√√
√√
√ 7 48650 HEATER-UPPER-RADIANT -104V-180W (208) 6 10
√√
√√
√ 7 48651 HEATER-UPPER-RADIANT -1 15V -180W (240) 6 10
√√
√√
√ 7 56618 HEATER-UPPER-RADIANT -120V-115W (120) 6 10
√√
8 SC04-003 SCREW 6 10
9 NS03-016 ACORN NUT 4 4
√√
√ recommended parts
√√
206 3-3
Page 4
Model HMI-103/105
Figure 3-3. Contactor
FIG . &
ITEM NO. PAR T NO. DESCRIPTION HMI-103 HMI-105
1 ME50-023 STANDOFF 4 4
√√
√ 2 49547 HI LIMIT - MANUAL RESET 2 2
√√
3 NS02-006 NUT 4 4
√√
√ 4 19405 CONTACTOR - 208/240 V 1 1
√√
√√
√ 4 56616 CONTACTOR - 120 V 1 1
√√
5 SC04-003 SCREW 3 3
6 SC01-205 SCREW 1 1
√√
√ recommended parts
√√
3-4 206
Page 5
Model HMI-103/105
Figure 3-4. Control Panel Assy.
204 3-5
Page 6
Model HMI-103/105
FIG . &
ITEM NO. PAR T NO. DESCRIPTION HMI-103 HMI-105
3-4 CONTROL PANEL ASSY.
1 45710 CONTROL PANEL 1 1
√√
√ 2 22317 INFINITE REGULA TOR 2 2
√√
3 MS01-381 BLACK NYLON CLIP 2 2
4 45717 CONTROL ACCESS P ANEL 1 1
5 MS01-382 BLACK NYLON RECEIVER 2 2
6 NS02-005 NUT 4 4
√√
√ 7 EF02-006 FUSE HOLDER 2 2
√√
8 SC04-003 SCREW 4 4
√√
√ 9 43768 POWER SWITCH 1 1
√√
√√
√ 10 EF02-007 FUSE 2 2
√√
11 SC01-113 SCREW 4 4
12 22046 INFINITE SWITCH KNOB 2 2
13 45835 DECAL - HMI-103 1 13 45809 DECAL - HMI-105 - 1
13 48547 DECAL - HMI-103 C.E. 1 13 48521 DECAL - HMI-105 C.E. - 1
√√
√ recommended parts
√√
3-6 206
Page 7
Model HMI-103/105
Figure 3-5. Lower Heat
204 3-7
Page 8
Model HMI-103/105
FIG . &
ITEM NO. PAR T NO. DESCRIPTION HMI-103 HMI-105
3-5 LOWER HEA T
1 SC02-041 SCREW 4 6
√√
√ 2 56617 HEATER - LOWER - 120V 2 2
√√
√√
√ 2 44976 HEATER - LOWER - 208V 2 3
√√
√√
√ 2 37059 HEATER - LOWER - 240V 2 3
√√
√√
√ 2 54025 HEATER - LOWER - CE 2 3
√√
3 SC04-003 SCREW (FAN BOX COVER) 8 8
4 49537 FAN ACCESS PANEL 2 2
√√
√ 5 37398 COOLING FAN - 220/230V 2 2
√√
√√
√ 5 56615 COOLING FAN - 110-120V 2 2
√√
√√
√ 6 49547 HIGH LIMIT - MANUAL RESET 2 2
√√
7 ME50-023 STANDOFF 4 4
8 SC04-003 SCREW (COVER PLATE) 3 3
9 SC01-205 SCREW 1 1
√√
√ recommended parts
√√
3-8 206
Page 9
Model HMI-103/105
Figure 3-6. Glass Panels
204 3-9
Page 10
Model HMI-103/105
FIG . &
ITEM NO. PAR T NO. DESCRIPTION HMI-103 HMI-105
3-6 GLASS P ANELS
1 48626 HINGE BLOCK COVER STUD ASSEMBL Y 1 1
2 45745 HINGE BLOCK 2 2
3 54029 CANOPY GLASS ASSY. 2 3 54039 CANOPY GLASS ASSY. - 2
4 49567 UPRIGHT COVER TOP, CORD 1 1
5 48626 HINGE BLOCK COVER STUD ASSEMBL Y 1 1
6 45677 END GLASS-CLEAR RT . 2 2
6 48508 END GLASS-MIRROR RT . 2 2
7 45699 BOTTOM ACCESS P ANEL 2 2
8 48568 END GLASS-CLEAR LT . 2 2
8 48507 END GLASS-MIRROR LT . 2 2
9 48522 END GLASS SEAL 4 4
10 45697 UPRIGHT ACCESS PANEL 2 2
11 NS02-006 NUT 4 4
12* 49593 POWER CORD ASSY. 30A-1PH TOP EXIT 1 1
12* 37123 POWER CORD ASSY. 20A-1PH-120V 1 1
12* 49594 POWER CORD ASSY. 20A-3PH BOT . EXIT 1 1
12* 49596 POWER CORD ASSY. 20A-3PH TOP EXIT 1 1
13* 05907 PEDEST AL BASE MOUNTING KIT - 1
13* 05906 PEDEST AL BASE MOUNTING KIT 1 14* 53185 BREAD SHELF ASSEMBL Y - SAFEW A Y 1 1
15* 48561 INSULATION, BOTTOM 1 —
15* 48523 INSULATION, BOTTOM — 1
16* 48564 INSULATION, CUSTOMER SIDE 1 —
16* 48524 INSULA TION, CUSTOMER SIDE — 1
17* 48565 INSULA TION, CONTROL SIDE 1 —
17* 48525 INSULA TION, CONTROL SIDE — 1
*not shown
3-10 204
Loading...