Henny Penny 691 Part Manual
Model 691
SECTION 3. PARTS INFORMATION
3-1. INTRODUCTION This section lists the replaceable parts of the Henny Penny Model
691 fryer.
3-2. GENUINE P ARTS Use only genuine Henny Penny parts in your fryer . Using a part of
lesser quality or substitute design may result in damage to the unit or
personal injury .
3-3. WHEN ORDERING P ARTS Once the parts that you want to order have been found in the parts
list, write down the following information:
Example:
Item Number 2
Part Number 16738
Description High Limit
From the data plate, list the following information:
Example:
Product Number 01100
Serial Number 0001
Voltage 120
3-4. PRICES Y our distributor has a price parts list and will be glad to inform you
of the cost of your parts order.
3-5. DELIVERY Commonly replaced items are stocked by your distributor and will
be sent out when your order is received. Other parts will be
ordered, by your distributor, from Henny Penny Corporation.
Normally , these will be sent to your distributor within three working
days.
3-6. WARRANTY All replacement parts (except lamps and fuses) are warranted for
90 days against manufacturing defects and workmanship. If damage occurs during shipping, notify the carrier at once so that a claim
may be properly filed. Refer to warranty on the facing pagefo r
other rights and limitations.
3-7. RECOMMENDED
SPARE PARTS FOR
DISTRIBUTORS
Recommended replacement parts, stocked by your distributor, are
indicated with
√√
√ in the parts lists. Please use care when ordering
√√
recommended parts, because all voltages and variations are
marked. Distributors should order parts based upon common
voltages and equipment sold in their territory .
106 3-1
Model 691
Figure 3-1. Frame and Cover Assembly
3-2 1004
Model 691
Figure &
Item No. Part No. Description Qt y.
3-1 FRAME & COVER ASSEMBL Y
1 39796 WELDMENT – CONTROL PANEL FRONT .............................. 1
2 53669 GUARD – POWER SWITCH ..................................................... 1
√√
√ 3 29898 SWITCH – POWER ................................................................... 1
√√
4 55608 TOP COVER – REAR SHROUD ................................................. 1
5 58261 REAR SHROUD – ACCESS ASSEMBL Y ................................... 1
6 58258 . ACCESS COVER – STUD ASSEMBL Y .................................... 1
7 58256 . HINGE – 2" LEAF HT .............................................................. 2
8 62056 . BRACE – REAR SHROUD ...................................................... 2
9 NS03-033 . NUT, WING – SS 10-24 ........................................................... 1
10 NS03-002 . NUT, ACORN #10-24 .............................................................. 8
11 SC03-005 . SCREW SD #8 X 1/2 PH PHD.................................................. 4
12 66933 PANEL – SIDE LH ...................................................................... 1
13 36337 DOOR – ACCESS ....................................................................... 1
14 66941 PANEL – SIDE RH ..................................................................... 1
15 52204 COVER – PILOT VIEW .............................................................. 2
16 35179 COVER – ACCESS COVER (SN: AP0603009 & BELOW) ........... 1
16 36337 COVER, Access Cover (SN: AP0603010 & ABOVE)................. 1
17 51741 COVER, GAS VALVE WIRE....................................................... 1
18 51640 FRAME ASSY – WELDMENT .................................................. 1
19 54225 1" INSER T – LEG MACHINED .................................................. 4
20 53673 CASTER, SWIVEL 4"................................................................. 2
21 37246 CASTER W/BRAKE & SWIVEL LOCK ..................................... 2
22 SC03-005 SCREW ...................................................................................... 8
23 SC01-215 SCREW ...................................................................................... 4
24 54921 LABEL - POWER/PUMP ........................................................... 1
25* 51801 RUNNER - DRAIN P AN (S/N BELOW HH001JJ)....................... 2
√ √
√ recommended parts
√ √
* not shown
507 3-3
Model 691
Figure &
Item No. Part No. Description Qt y.
3-2 CONTROL P ANEL
√√
√ 1 65279RB CONTROL ASSY – 691 (S/N FH001JC AND HIGHER) .................... 1
√√
√√
√ 1 14465 CONTROL ASSY KIT , 120V , 691 (BELOW S/N FH001JC)................ 1
√√
√√
√ 1 14466 CONTROL ASSY KIT , 220-240V , 691 (BELOW S/N FH001JC) ......... 1
√√
√√
√ 1 14363 KIT-691 to Giant of Carlisle C8000-60HZ (BELOW S/N FH001JC) ... 1
√√
√√
√ 1 14637 KIT-691 to Giant of Carlisle C8000-50HZ (BELOW S/N FH001JC) ... 1
√√
√√
√ 1 65933RB ASSY -8HD Giant of Carlisle CNTRL(S/N FH001JC AND HIGHER) . 1
√√
√√
√ 1 66120RB ASSY - 8HD C8000 POLLO CONTROL ........................................... 1
√√
2 65236 . CONTROL DECAL ...................................................................... 1
3 32634 . MENU CARD, BLANK ................................................................ 1
3 65922 . MENU CARD, PREPRINTED - GM .............................................. 1
3 65923 . MENU CARD - GIANT OF CARLISLE ........................................ 1
3 69228 . MENU CARD - POLLO CAMPERO ............................................. 1
√√
√ 4 26974 . WIRE/SPEAKER ASSY ................................................................ 1
√√
5 65661 . STUD ASSY-8-HEAD-C8000- COVER .......................................... 1
6* 65893RB . ASSY - I/O BOARD...................................................................... 1
√ √
√ recommended parts
√ √
3-4 507
Model 691
Figure &
Item No. Part No. Description Qt y.
3-3 ELECTRICAL CONTROLS
√√
√ 1 29521 TRANSFORMER ASSY – 10/24V .......................................... 1
√√
2 SC03-005 SCREW .................................................................................. 2
√√
√ 3 54472 Power Relay-120V .................................................................. 1
√√
√√
√ 3 56394 Power Relay-240V .................................................................. 1
√√
√√
√ 4 60818 Relay - 24V -10A...................................................................... 2
√√
5 62053 SHIELD – WIRE – RH BURNER NON CE.............................. 1
6 NS02-005 NUT ....................................................................................... 2
√√
√ 7 21347 IGNITION MODULE .............................................................. 2
√√
√√
√ 7 54924 IGNITION MODULE – CE ..................................................... 2
√√
8 SC01-214 SCREW #10-32 X 1 PH THD SS ............................................. 4
9 NS02-001 NUT HEX KEPS #10-32 C ...................................................... 4
10 53656 POWER CORD – 120V ........................................................... 1
√√
√ 11 54988 FILTER – 220V – 50/60HZ GA CE........................................... 1
√√
12 SC01-006 SCREW #10-32 X 3/8 PH THD C............................................ 2
√ √
√ recommended parts
√ √
106 3-5
Model 691
Figure &
Item No. Part No. Description Qt y.
3-4 FR YPOT COVERS AND INSULATION
1 52799 ASSY -INSUL/LFT . C/CHAMBER .......................................... 1
2 52041 INSULA TION-C/CHAMBER MOUNTIN .............................. 4
3 52798 ASSY -INSUL/R T. C/CHAMBER ............................................ 1
4 52800 ASSY -INSUL/REAR C/CHAMBER........................................ 1
5 52038 INSULA TION-LOWER CHAMBER DUC .............................. 3
6 52040 INSULA TION-REAR C/CHAMBER ...................................... 1
7 51897 INSULA TION-LOWER CHAMBER COV .............................. 2
8 52039 INSULA TION-C/CHAMBER COLLAR.................................. 1
9 52120 ASSY -LOWER C/CHAMBER DUCT ..................................... 1
10 52801 ASSY -INSUL/CHAMBER COVER ......................................... 1
11 52795 ASSY INSUL/TUBE-CHAMBER RT . ..................................... 1
12 52792 INSULA TION-TUBE TO C/CHAMBER ................................. 2
13 52794 ASSY -INSUL/TUBE-CHAMBER LFT. ................................... 1
14 52797 ASSY -INSUL/LOWER CHAMBER CAP ............................... 1
15 52793 INSULA TION - C/CHAMBER CAP ....................................... 2
16 52796 ASSY -INSUL/UPPER CHAMBER CAP ................................. 1
17 NS02-005 NUT HEX KEPS #6-32C ......................................................... 5
18 NS02-006 NUT HEX KEPS #10-24C ....................................................... 34
19 SC02-014 SCREW #8 AB X 3/8 PH #400SS............................................ 27
3-6 804
Model 691
Figure &
Item No. Part No. Description Qt y.
3-5 INSULA TION COVERS
1 WA02-001 WASHER – INSULATION 1-1/2” DIA................................... 17
2 51763 INSULA TION COVER – LEFT ............................................... 1
3 51892 INSULA TION – C/CHAMBER SIDE ..................................... 2
4 51765 INSULA TION COVER – RIGHT............................................. 1
5 51759 INSULA TION COVER – REAR .............................................. 1
6 51893 INSULA TION – REAR C/CHAMBER.................................... 1
7 SC02-014 SCREW #8-AB X 3/8 PH #400SS ........................................... 10
8 51739 TOP FRONT INSULA TION P ANEL....................................... 1
9 51894 INSULATION – TOP FRONT P ANEL .................................... 1
10 62060 SHIELD – HIGH LIMIT .......................................................... 1
11 SC03-005 SCREW SD #8 X 1/2 PH PHD ................................................ 2
12 51753 INSULA TION COVER – TUBE TRAN RH............................. 1
13 53661 INSUL. – TUBE/CHAMBER-SIDE ......................................... 4
14 53662 INSUL – TUBE/CHAMBER-BOTTOM .................................. 2
15 53660 INSUL. – TUBE/CHAMBER-BACK ...................................... 2
16 51755 INSULA TION COVER – TUBE TRANS................................. 1
17 51821 CONTROL INSULA TION COVER LH .................................... 1
18 53659 INSULA TION – POT FRONT (FOIL) ..................................... 1
19 51806 POT FRONT INSULA TION COVER ...................................... 1
20 53658 INSULA TION – POT FRONT ................................................ 1
904 3-7
Model 691
Figure 3-6. Lid and Cover Assembly
3-8 507
Model 691
Figure &
Item No. Part No. Description Qty.
3-6 LID AND COVER ASSEMBLY
1 35792 LID INSTRUCTION LABEL ................................................... 1
2 35675 FILLER-LID ............................................................................ 2
3 35243 COVER-MAIN LID ................................................................ 1
4 35413 PLATE-TRIP .......................................................................... 1
√√
√ 5 52627 PRESSURE P AD ASSY . .......................................................... 2
√√
6 49852 . BUSHING-PRESSURE P AD ................................................. 2
7 SC01-204 . SCREW 1/4-20X1.00 SOCK BUTT ...................................... 2
8 49962 PLATE, SHIM ASSY. (L.H.) .................................................... 1
9 49890 PLATE, CAM GUIDE (L.H.) ................................................... 1
10 35359 SLIDE (6”) .............................................................................. 2
11 RR01-004 RING , RETAINING ½”............................................................ 1
1 2 W A01-020 WASHER, LID STOP ............................................................. 1
13 51531 CAST, LID STOP ................................................................... 1
14 SC01-074 SCREW, #10-32 x ½ PH THD SS ............................................ 8
15 35223 WASHER, SPECIAL .............................................................. 1
16 35227 ROLLER, LINKAGE SHAFT .................................................. 2
17 35339 GUIDE, HANDLE SIDE .......................................................... 2
18 SC01-062 SCREW, #6-32 x 3/8 PH FH .................................................... 4
20 SC01-041 SCREW, 5/16-18 x 1.00 HEX HD C .......................................... 2
21 36285 WELDMENT , HANDLE TAP PLATE .................................... 1
√√
23 34526 GASKET , LID ......................................................................... 1
√
√√
24 35945 PIN, LID SUPPORT ................................................................ 1
25 52497 LATCH ASSEMBL Y , COATED .............................................. 1
26 52498 LA TCH SPRING ..................................................................... 1
27 59169 LATCH BRACKET , LID (MACHINED) ................................. 1
28 51707 LATCH BRACKET , LID ......................................................... 2
29 L W02-006 LOCKW ASHER, LA TCH ....................................................... 2
30 SC01-248 SCREW , LA TCH, 10-32 x 1.25 PH THD SS ............................. 2
31 35032 PIN, LID SUPPORT ................................................................ 1
32 RR01-010 RING , RET. 3/4 SHAFT SS ...................................................... 2
33 36312 W ASHER, LID HINGE ........................................................... 2
34 51697 PIN, LID HINGE ..................................................................... 1
35 49895 PLATE, CAM GUIDE (R.H.)................................................... 1
36 49963 PLATE SHIM ASSEMBL Y (R.H.) ........................................... 1
37 SC01-146 SCREW , 1/4-20 x 3/4 HEX HD SS ........................................... 2
38 52477 LIFT , LID ................................................................................ 1
39 35465 CAM SLIDE FILLER .............................................................. 2
40* 52178 SHIM, LID LIFT ..................................................................... 1
41 SC01-195 SCREW , 8-32 x 1-7/16 PH FHD S ............................................ 12
42 OR01-005 O-RING, 5/16 x 1/16 DIA. ........................................................ 12
43 L W01-002 LOCKW ASHER, SPLIT RING 1/4 S ....................................... 12
44 NS01-008 NUT, 8-32 HEX....................................................................... 12
45 72379 ASSY - REBUILT LID ................................................ 1
√ √
√ recommended parts
√ √
* not shown
507 3-9
Model 691
Figure 3-7. Drain Pan and Filter Assembly
3-10 1004
Model 691
Figure &
Item No. Part No. Description Qt y.
3- 7 DRAIN PAN AND FIL TER ASSEMBLY
1 52194 CRUMB CA TCHER (OPTIONAL) ......................................... 1
2 03204 CRUMB CA TCHER BASKET W/HANDLE (OPTIONAL) .... 1
2 21010 . CRUMB CA TCHER BASKET ASSEMBL Y ......................... 1
2 24429 . HANDLE - CRUMB BASKET ............................................. 1
3 52496 FILTER DRAIN P AN ASSEMBL Y.......................................... 1
4 52487 . CASTER .............................................................................. 2
5 SC01-009 . SCREW 1/4-20 X 1/2 ............................................................ 8
6 NS02-002 . NUT 1/4-20 .......................................................................... 8
7 17505 FILTER CLIPS ........................................................................ 2
8 17503(use 14671) BOTTOM FIL TER SCREEN (SN: KH031JJ AND BELOW ...... 1
8 17503(use 14674) BOTTOM FIL TER SCREEN (SN: KH032JJ T O AP0503043) ... 1
8 65447 BOTTOM FILTER SCREEN (SN: AP0503044 AND ABOVE) .. 1
9 17502(use 14671) TOP FIL TER SCREEN (SN: KH031JJ AND BELOW) ............. 1
9 17502(use 14674) TOP FIL TER SCREEN (SN: KH032JJ AND ABOVE) .............. 1
10 36305 W ASHER & STANDPIPE ...................................................... 1
11 55876 STANDPIPE ASSEMBLY (S/N KH031JJ & BELOW) ............. 1
11 62081 STANDPIPE ASSEMBLY (S/N KH032JJ to AH085JB) ........... 1
11 24212 STANDPIPE ASSEMBL Y (S/N AH086JB to AP0503043) ....... 1
11 14658 STANDPIPE ASSEMBL Y (S/N AP0503044 AND ABOVE) ..... 1
√√
√ 1 2 17431(use 69289) . UNION - MALE FITTING ................................................... 1
√√
√√
1 3 17432(use 69289) . UNION - HANDLE FITTING............................................... 1
√
√√
14 24211 . WELDMENT, FIL TER TUBE AND WASHER ..................... 1
15 23740 . HANDLE, STANDPIPE 8 HEAD ......................................... 1
16 SC01-245 . SCREW 10-32 X 1/2 ............................................................. 3
17 23804 . INSERT , FIL TER NUT.......................................................... 1
18 OR01-007 . O-RING , FIL TER NUT INSER T ............................................ 1
19 55877 . FILTER NUT (S/N KH031JJ & BELOW).............................. 1
19 65208 . FILTER NUT - (S/N KH032JJ to AH085JB) .......................... 1
19 23803 . FILTER NUT - (S/N AH086JB to AP0503043) ...................... 1
19 66535 . FILTER NUT - SS (S/N AP0503044 & ABOVE)................... 1
20 62082 FILTER DRAIN P AN COVER ASSEMBL Y............................. 1
√√
21 12102 FILTER ENVELOPE P APER (100 PER CART ON) ................... 1
√
√√
22 52209 ROD - CLEAN OUT ............................................................... 1
√√
√ 23 52208 BRUSH ................................................................................... 1
√√
24 35310 STIRRER ................................................................................ 1
√√
√ 25 12126 BLACK L-BRUSH .................................................................. 1
√√
26 65211 CRUMB CA TCHER................................................................ 1
√ √
√ recommended parts
√ √
106 3-11
Model 691
Figure 3-8A. Filter Pump Assembly (SN: LH028JC and below)
3-12 1005
Loading...