Henny Penny 520 Part Manual
Henny Penny Model 520
SECTION 6. PARTS INFORMATION
6-1. INTRODUCTION This section lists the replaceable parts of Henny Penny Model
520 Compact Pressure Fryer.
6-2. GENUINE P ARTS Use only genuine Henny Penny parts in your fryer . Using a
part of lesser quality or substitute design may result in cabinet
damage or personal injury .
6-3. HOW TO FIND PARTS T o find items you want to order from the Parts List, proceed
as follows:
1. Referring to the illustration in this section, find the part item
number of the part needed.
2. Find the item number in the parts list, which shows the Henny
Penny part number, a description of the part, any model or
usage limitations, and the quantity of parts used.
6-4. HOW TO ORDER Once the parts you want to order have been found in the
Parts List, write down the following information:
Example:
Item number 31
Part number 17308
Description Filter V alve
From the date plate list the following information:
Example:
Product number 02571
Serial number 00179
Phase 3
Voltage 208
6-5. RECOMMENDED
SPARE P ARTS FOR
DISTRIBUTORS
Recommended replacement parts, stocked by your distributor, are
indicated with
√√
√ in the parts lists. Please use care when ordering
√√
recommended parts, because all voltages and variations are
marked. Distributors should order parts based upon common
voltages and equipment sold in their territory .
206 6-1
Henny Penny Model 520
6-2 101
Henny Penny Model 520
520 FRYER PAR TS LIST
PART
NO. NUMBER DESCRIPTION Qty.
37956 LID ASSEMBL Y , Complete .............................................. 1
√√
√ 1 19475 TORSION SPRING, Lid .................................................. 1
√√
2 37955 LID, Machined Casting...................................................... 1
3 32227 KNOB.............................................................................. 1
4 16165 SPRING , LockPin............................................................. 1
5 37505 RETAINER, Pin. ............................................................... 2
6 37751 LOCKING LEVER ARM ASSEMBL Y ............................ 1
7 SC01-049 SCREW #6-32 x 3/8 PH-RHD C ..................................... 6
8 19471 LINER, Lid ....................................................................... 1
√√
√ 9 19472 GASKET , Lid ................................................................... 1
√√
10 SC01-152 SCREW #6-32 x 3/8 PH-FHD SS.................................... 8
11 36146 CAMSHAFT , Machined ................................................... 1
12 RR01-008 RING , Ret.1 1/2 Shaft ....................................................... 1
13a 29070 ELEMENT SPREADER-BAR.......................................... 3
13b 29359 ELEMENT SPREADER ................................................... 3
13c SC01-055 ELEMENT SPREADER-SCREW .................................... 3
14 36177 EXTRACTION CAM ...................................................... 1
√√
√ 15 29224 HEATING ELEMENT, 6KW, 208V ................................. 1
√√
√√
√ 36072 HEATING ELEMENT , 6KW , 220V................................. 1
√√
√√
√ 48436 HEATING ELEMENT , 6KW , 230V................................. 1
√√
16 RR01-009 RING , Ret. 1 1/8 Shaft ...................................................... 1
17 36562 PIN, Cam ......................................................................... 1
18 29339 SLEEVE, Fryer ................................................................. 1
19 36094 HANDLE, Finished ........................................................... 1
20 29397 SPRING ........................................................................... 1
21 29341 NUT, Handle..................................................................... 1
22 38231 SHAFT, Handle (units built before 1993 use 38231 & 36094) 1
23 16102 KNOB, Spindle (Red)....................................................... 1
24 16855 SEAL, “O” Ring ................................................................ 2
25a 29295 BRACKET , High Limit Thermocouple - BAR .................... 2
25b 29297 BRACKET , High Limit Thermocouple ............................... 2
25c SC01-055 BRACKET, High Limit Thermocouple -SCREW ............... 6
26 36079 SCREW , 5/16-24 x 1 Flat HD .......................................... 2
27 36145 LATCHPLA TE, Machined................................................. 1
28 36163 POT & COUNTERTO P WELDMENT ............................ 1
29 36056 SHIM, Latch .005 ............................................................. 1
30 17255 COTTER PIN................................................................... 4
√√
√ 31 17308 FILTER V AL VE................................................................ 1
√√
32 19739 ROD, Filter V alve Extension .............................................. 1
√√
√ recommended parts
√√
206 6-3
Loading...