Henny Penny 290 User Manual
Model 290
SECTION 3. PARTS INFORMATION
3-1. INTRODUCTION This section lists the replaceable parts of the Henny Penny Model
290 fryer.
3-2. GENUINE P ARTS Use only genuine Henny Penny parts in your fryer. Using a part of
lesser quality or substitute design may result in damage to the unit or
personal injury .
3-3. WHEN ORDERING P ARTS Once the parts that you want to order have been found in the parts
list, write down the following information:
Item Number 2
Part Number 16738 Example:
Description High Limit
From the data plate, list the following information:
Product Number 01100
Serial Number 0001 Example:
Voltage 208
3-4. PRICES Y our distributor has a price parts list and will be glad to inform you
of the cost of your parts order.
3-5. DELIVERY Commonly replaced items are stocked by your distributor and will
be sent out when your order is received. Other parts will be
ordered, by your distributor, from Henny Penny Corporation.
Normally , these will be sent to your distributor within three working
days.
3-6. WARRANTY All replacement parts (except lamps and fuses) are warranted for
90 days against manufacturing defects and workmanship. If damage occurs during shipping, notify the carrier at once so that a claim
may be properly filed. Refer to warranty in the front of this manual
for other rights and limitations.
3-7. RECOMMENDED
SPARE PARTS FOR
DISTRIBUTORS
Recommended replacement parts, stocked by your distributor, are
indicated with
√√
√ in the parts lists. Please use care when ordering
√√
recommended parts, because all voltages and variations are
marked. Distributors should order parts based upon common
voltages and equipment sold in their territory .
106 3-1
Model 290
3-8. INDEX OF P AR TS LIST ILLUSTRA TIONS
Title Fig. No. Page No.
FRAME AND COVER ASSEMBLY............................................................. 3-1 3-3
ELEMENT ASSEMBL Y................................................................................ 3-2 3-5
COUNTERWEIGHT SYSTEM..................................................................... 3-3 3-6
LID ASSEMBL Y ........................................................................................... 3-4 3-7
CONTROL P ANEL ASSEMBL Y.................................................................. 3-5 3-8
BEHIND CONTROL PANEL COMPONENTS........................................... 3-6 3-9
FIL TER PUMP ASSEMBLY (SN: LG012JC & BELOW) ............................. 3-7A 3-10
FIL TER PUMP ASSEMBLY (SN: LG013JC & ABOVE) .............................. 3-7B 3-12
DRAIN VAL VE & DRAIN SWITCH ASSEMBLIES ................................... 3-8 3-14
DRAIN PAN AND FIL TER ASSEMBLY...................................................... 3-9 3-15
CARRIER, RACKS & JUNCTION BOX ASSY .......................................... 3-10 3-17
3-2 104
Model 290
Figure 3-1. Frame and Cover Assembly
205 3-3
Model 290
Figure &
Item No. Part No. Description Qty .
3-1 FRAME & COVER ASSEMBLY
1 39796 WELDMENT – CONTROL PANEL FRONT .......... 1
2 53669 GUARD – POWER SWITCH ................................... 1
√√
√ 3 29898 SWITCH – POWER ................................................. 1
√√
4 54225 1" INSER T – LEG MACHINED ............................... 4
5 53673 CASTER, SWIVEL 4"............................................... 2
6 37246 CASTER W/BRAKE & SWIVEL LOCK ................. 2
7 SC03-005 SCREW - - #8 x 1/2” PH PHD.................................. 4
8 66934 SIDE P ANEL – RIGHT ............................................. 1
9 SC01-215 SCREW - 5/16-18 x 2.5” HEX HD BOLT ................ 4
10 37291 REAR SHROUD – ACCESS ASSEMBL Y................ 1
1 1 35726 TOP COVER – REAR SHROUD.............................. 1
12 66933 SIDE P ANEL – LEFT................................................ 1
12 14457 KIT - SOUND DEADENING................................... 1
13 36337 DOOR – ACCESS .................................................... 1
14 SC02-023 SCREW - #8-B x 3/8” PH THD SS........................... 5
√ √
√ recommended parts
√ √
3-4 106
Model 290
Figure &
Item No. Part No. Description Qty .
3-2 ELEMENT ASSEMBL Y
1 SC01-083 SCREW, (#10-32 x 1/2 PH FHD) .............................. As Required
2 35101 SUPPOR T , ELEMENT - LONG................................ 5
3 35100 SUPPOR T , ELEMENT - SHOR T .............................. 5
4 SC01-074 SCREW, (#10-32 x 1/2 PH THD S)........................... As Required
5 35435 BRACKET , HI LIMIT PROBE .................................. 3
6 35462 BRACKET , HI LIMIT PROBE .................................. 3
√√
√ 7 35234 HEAT ELEMENT ASSEMBL Y , 8.5 KW 208V .......... 2
√√
√√
√ 7 35598 HEA T ELEMENT , 8.5 KW 240V .............................. 2
√√
√√
√ 7 48367 HEAT ELEMENT , 230 V(Int’l Only) .......................... 2
√√
√√
√ 7 36290 HEAT ELEMENT , 220 V(Int’l Only) .......................... 2
√√
8 16855 SEAL, O-RING ......................................................... 4
9 W A01-005 WASHER, (5/8 DIA. TYPE A - SERIES N) ............... 8
10 NS01-017 NUT, (5/8-18 B HEX) ................................................ 4
√ √
√ recommended parts
√ √
106 3-5
Model 290
Figure &
Item No. Part No. Description Qty .
3-3 COUNTERWEIGHT SYSTEM
1 35026 ARM, LID SUPPORT ..................................................... 2
√√
√ 2 140225 KIT-CABLE (2 CABLES)............................................... 1
√√
3 NS01-025 NUT, HEX 5/16-18 SS ..................................................... 10
4 LW01-010 W ASHER, 3/8 SPLIT RING SS ...................................... 10
5 35092 CARRIAGE...................................................................... 1
6 SC01-069 SCREW, 3/8-16 X 1-1/2 HEX HD S2P ........................... 8
7 36839 SLIDE ............................................................................... 2
8 SC01-042 SCREW, 3/8-16 X 1 HEX C............................................. 2
9 36625 WELD ASSEMBLY, C/W CARRIAGE .......................... 1
10 36627 COUNTERWEIGHT BAR .............................................. 4
1 1 36626 SPACER, C/W FRAME .................................................. 2
12 37362 WHEEL, CARRIAGE ..................................................... 4
13 37363 SPACER, CARRIAGE WHEEL ..................................... 4
14 37364 SPINDLE.......................................................................... 4
15 SC01-081 SCREW, 3/8-24 X 3/4 HEX HD SS ................................. 4
√ √
√ recommended parts
√ √
3-6 712
Loading...