Heitronic 34013, 34012, 34014, 34010, 34011, 34009 User guide [ml]
Specifications and Main Features
Frequently Asked Questions
User Manual
D Installations- und Bedienungsanweisung
Heitronic
®
LED Bilder
Art. Nr. 34009-34014
Herzlichen Dank, dass Sie sich für den Kauf unseres Produktes entschieden haben.
Unser Bild ist aus robusten und hochwertigen Materialien hergestellt und ermöglicht Ihnen eine ansprechende
Beleuchtung. Diese Leuchte kann nur in trockenen Innenbereichen als Dekorationsbeleuchtung eingesetzt
werden.
Bitte lesen Sie diese Installations- und Bedienungsanweisung sorgfältig durch und bewahren Sie diese
gut auf.
Bei Sach- und Personenschäden durch Nichtbeachten der Anleitung, durch unsachgemäße Handhabung oder für
vorgenommene Änderungen am Produkt übernehmen wir keine Haftung.
Verpackungsinhalt:
1 LED Bild
Installation- und Bedienungsanweisung
Technische Daten:
ArtikelAnschlussLeuchtmittel
340093 BatterienTyp AA, 1,5V14 LED Leuchtmittel, nicht auswechselbarIII
340103 BatterienTyp AA, 1,5V16 LED Leuchtmittel, nicht auswechselbarIII
340113 BatterienTyp AA, 1,5V12 LED Leuchtmittel, nicht auswechselbarIII
340123 BatterienTyp AA, 1,5V16 LED Leuchtmittel, nicht auswechselbarIII
340133 BatterienTyp AA, 1,5V16 LED Leuchtmittel, nicht auswechselbarIII
340143 BatterienTyp AA, 1,5V16 LED Leuchtmittel, nicht auswechselbarIII
Sicherheits- und Warnhinweise:
Vorsicht. Dieses Produkt ist kein Spielzeug. Von Kindern fernhalten.
Nehmen Sie die Teile vorsichtig aus der Verpackung.
Bevor Sie das Produkt in Betrieb nehmen, versichern Sie sich, dass diese auf dem Transportweg nicht
beschädigt wurde. Bei Beschädigungen ist die Inbetriebnahme untersagt.
Verpackungsmaterial von Kindern und Haustieren fernhalten.
Nehmen Sie niemals selbst Reparaturen an defekten Teilen vor.
Bringen Sie das Produkt nicht mit extremer Hitze oder offener Flamme in Kontakt.
Das gesamte Produkt darf nicht verändert oder umgebaut werden. Veränderungen am Produkt führen
zum Erlöschen der Garantie (Gewährleistung).
Pflege und Wartung:
Zur Reinigung verwenden Sie ein trockenes Tuch.
Niemals Chemikalien oder Scheuermittel zur Reinigung verwenden.
Bei längerer Nichtbenutzung entfernen Sie die Batterien.
Entsorgung:
Elektronik-Altgeräte müssen den öffentlichen Sammelstellen zugeführt werden und dürfen nicht als
Hausmüll entsorgt werden.
Batterien dürfen nicht in den Hausmüll gegeben werden. Sie sind zur Rückgabe gebrauchter Batterien
als Endverbraucher gesetzlich verpflichtet. Sie können Batterien nach Gebrauch in der Verkaufsstelle
oder in deren unmittelbarer Nähe (z.B. in Kommunalen Sammelstellen oder im Handel) unentgeltlich
zurückgeben.
Schadstoffhaltige Batterien sind mit dem Zeichen "durchgestrichene Mülltonne" und einem der
chemischen Symbole Cd (=Batterie enthält Cadmium), Hg (=Batterie enthält Quecksilber) oder Pb
(=Batterie enthält Blei) gekennzeichnet.
Batterien dürfen nur im entladenen Zustand in die Altbatteriesammelgefäße bei Handel und bei
öffentlich-rechtlichen Entsorgungsträgern abgegeben werden. Bei nicht vollständig entladenen Batterien
muss Vorsorge gegen Kurzschluss getroffen werden. Ein Kurzschluss kann durch Isolieren der Pole mit
Klebestreifen verhindert werden.
Batteriewechsel:
Bei Nachlassen der Leuchtkraft ist es erforderlich, die Batterien zu wechseln. Bitte Batterien TYP AA,
1,5V einsetzen. Die Verwendung anderer Batterien kann zu Schäden führen.
Beim Batteriewechsel immer alle Batterien wechseln. Achten Sie beim Einsetzen der Batterien auf die
richtige Polung.
Bedienung:
Zum Ein- bzw. Ausschalten den seitlichen Druckschalter betätigen. Kontrollieren Sie in regelmäßigen
Abständen die ordnungsgemäße Aufstellung.
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Installationsanweisung Art. Nr. 34009-34014Seite 1 von 1Stand 08.2013
GB Installation and operating instructions
Heitronic
®
LED picture
Art. No. 34009-34014
Many thanks for deciding to buy our product.
Our picture is made of sturdy, high-quality materials and provides reliable and pleasant lighting. The light can be
used for decorative lighting for interior areas.
Please read through installation and operation instructions carefully and keep these in a safe place.
We do not accept liability for damage to persons or property cause by non observation of the instructions,
improper handling or for una uthorized changes made to the product.
Package contents:
1 LED picture
Installation and operating instructions
Technical data:
ArticleConnectionIlluminant
340093 batteries type AA 1,5V14 LED illuminant, non-replaceableIII
340103 batteries type AA 1,5V16 LED illuminant, non-replaceableIII
340113 batteries type AA 1,5V12 LED illuminant, non-replaceableIII
340123 batteries type AA 1,5V12 LED illuminant, non-replaceableIII
340133 batteries type AA 1,5V16 LED illuminant, non-replaceableIII
340143 batteries type AA 1,5V16 LED illuminant, non-replaceableIII
Safety and warning notes:
Take the parts carefully out of the packaging.
Make sure, before using the product that it is complete and has not been damaged during transportation.
Do not operate the product if there is damage.
Keep packaging materials well away from children and pets.
Do not bring the picture into to contact with extreme heat or an exposed flame.
The entire product must neither be changed nor converted. Changes made lead to invalidation of the
guarantee (warranty).
Care and maintenance:
Use a dry cloth for cleaning. Do not use any pointed or sharp items for cleaning.
Never use chemicals or abrasives for cleaning.
When the product is not going to be used for an extended period of time, remove the batteries.
Disposal:
Old electronic equipment must be brought to public connection points and must not be disposed of as
household waste.
Batteries must not be disposed of in the household waste. You are legally obliged, as a final consumer,
to return used batteries. You can hand back batteries after use to the sales point or to its immediate
vicinity (to municipal group collection points or to the trade outlet) for example.
Batteries containing harmful materials are marked with "crossed out waste bin" and one of the chemical
symbols Cd (= battery contains cadmium), Hg (= battery contains mercury) or Pb (= battery contains
lead).
Batteries may only be handed over in an empty and drained state into the used battery collection
container at retail outlets and at disposal points organized by the public authorities. Batteries which have
not been completely drained must be protected against short circuiting. A short circuit can be prevented
by insulating the poles with adhesive tapes.
Changing the batteries:
Insert two type AA 1,5V batteries into the battery compartment. Make sure the batteries have the right
polarity.
Allways change all batteries.
Operationg:
Make sure that the base is suitable for supporting the weight of the picture permanently and reliably.
Use the slide switch beside the housing to switch on/off.
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Installation instruction Art. No. 34009- 34014Page 1 von 1Status 08.2013
F Instructions d’installation et d’utilisation
Heitronic
®
LED Tableau
Réf. n° 34009 - 34014
Merci beaucoup d’avoir acheté notre tableau.
Notre tableau est fait de matériaux robustes et de haute qualité et vous permet de bénéficier d’un éclairage
attrayant. Le tableau sera uniquement utilisée comme éclairage décoratif à l’intérieur dans des locaux secs.
Veuillez lire attentivement ces instructions d’installation et d'utilisation et les garder pour la référence
ultérieure.
Nous n’assumons aucune responsabilité des dommages matériels ou de personnes causés par le non-respect
des instructions ou l'utilisation incorrecte ou des modifications réalisées sur le produit.
Contenu de l’emballage:
1 Tableau
1 instruction d’installation et d’utilisation
Caractéristiques techniques:
Réf. n°.RaccordLampes
340093 batteries AA, 1,5V14 lampes LED, non échangeablesIII
340103 batteries AA, 1,5V16 lampes LED, non échangeablesIII
340113 batteries AA, 1,5V12 lampes LED, non échangeablesIII
340123 batteries AA, 1,5V16 lampes LED, non échangeablesIII
340133 batteries AA, 1,5V16 lampes LED, non échangeablesIII
340143 batteries AA, 1,5V16 lampes LED, non échangeablesIII
Consignes de sécurité et d’avertissement:
Attention. Ce produit n’est pas de jouet. Tenez-le hors de la portée des enfants.
Enlevez les pièces précautionneusement de l’emballage.
Assurez-vous que le tableau n’a pas été endommagée au cours du transport avant de la mettre en
service. Il est interdit d'utiliser le tableau lorsque des pièces sont endommagées.
Tenez le matériau d’emballage hors de la porte d’enfants et d'animaux domestiques. Risque
d'étouffement !
Ne réparez jamais vous-même des pièces défectueuses.
Evitez tout contact de le tableau avec la chaleur extrême ou les flammes nues.
Il est interdit de modifier ou transformer le produit. La garantie prend fin en cas de modifications.
Entretien et maintenance
Utilisez un chiffon sec légèrement nettoyage.
Il est interdit d’utiliser de produits chimiques ou abrasifs pour le nettoyage.
Si le tableau n'est pas utilisée pour une période prolongée, enlevez les batteries.
Evacuation:
Evacuez les appareils électroniques usés aux points de ramassage publics. L’élimination avec les
ordures ménagères est interdite.
Les piles ne doivent pas être éliminées avec les déchets ménagers. En tant que consommateur, vous
êtes dans l'obligation légale de faire recycler vos piles usagées. Vous pouvez après utilisation
déposer gratuitement vos piles au point de vente ou au point de collecte le plus proche (p. ex. à un
point de collecte municipal ou dans un magasin).
Les piles contenant des produits nocifs sont pourvues d'un sigle représentant une "poubelle barrée"
ainsi que d'un des symboles chimiques Cd (= la pile contient du cadmium), Hg (= la pile contient du
mercure) ou Pb (= la pile contient du plomb).
Les piles ne doivent être déposées qu'à l'état déchargé aux points de collecte disponibles dans les
commerces et les services publics d'élimination des déchets. En présence de piles non
complètement déchargées, prendre des mesures de prévention contre les courts-circuits. On peut
empêcher les courts-circuits en isolant les pôles avec du ruban adhésif
Classe de protection
Remplacement des batteries:
Si l'intensité lumineuse diminue, il faut remplacer les batteries (voir les illustrations). N'utilisez que des
batteries TY AA, 1,5V. L’utilisation d'autres accumulateurs/batteries peut provoquer des dommages.
Utilisation:
Pour la mise en et hors circuit actionnez l’interrupteur à poussoir. Vérifiez l’installation correcte à des
intervalles réguliers.
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Instructions d’installation Réf. n° 34009-34014Page 1 sur 1Date 08.2013
Loading...
+ 6 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.