Heitronic 24000, 24001 Installation and operating instructions
GB Installation and operating instructions
®
on/off
Clamp light 1W
Art. No. 24000, 24001
Many thanks for deciding to buy our lights.
Our LED light is made out of sturdy, high value materials and will provide you with quality lighting. The light can
be used indoors.
Please read through installation and operation instructions carefully and keep these in a safe place for
future reference.
We do not accept liability for damage to persons or property caused by non observation of the instructions,
improper handling or for unauthorized changes made to the product.
Package contents:
1 LED light
Installation and operating instructions
Technical data:
Article colour Connection Illuminant
24000 metal
24001 glas
220-240 V 50 Hz
Sec. 3-13 V DC, 350mA, 1-3W
220-240 V 50 Hz
Sec. 3-13 V DC, 350mA, 1-3W
1 LED illuminant max. 1W
3000K, cannot be changed
1 LED illuminant max. 1W
3000K, cannot be changed
LEDClass
1 IP 20 II
1 IP 20 II
Protection
type
Protection
Class
Safety and warning notes:
Do not look directly into the LED - especially for longer periods of time - without protecting your eyes. A
LED beam should not be directed into other people's eyes.
Make sure, before using the light that it has not been damaged during transportation. Do not operate the
light if the cable or the electrical parts are damaged. Repairs may only be done by a specialist
electrician.
Keep packaging materials well away from children and pets. Danger of suffocation!
Do not leave children unattended in the area of the lights or other electrical appliances.
Never expose the lights to a direct jet of water garden hose or high pressure cleaner, for example) and
never immerse the lights into water or other liquids !
The entire product must neither be changed nor converted. Changes made to the light lead to annulment
of the guarantee (warranty).
Care and servicing:
You must make sure that the power supply is disconnected before cleaning.
Use a dry, or slightly damp cloth for cleaning.
Never use chemicals, inflammable cleaners or abrasives for cleaning. These can damage the surface
and / or the insulations of the light.
Disposal:
Old electronic equipment must be brought to public connection points and must not be disposed of as
household waste.
Installation:
Make sure that the connection values of your building installation for the power supply to the
light comply with the data stated on the name plate of this light.
Make sure that the base is suitable and the weight of the lights can be supported permanently
and reliably.
Do not bend the cable, make sure that the cable and the plug are free from strain and
rotational forces. Protect all cables and insulations from possible damage.
The name plate must not be removed.
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Installation instruction Art. No. 24000, 24001 Page 1 of 1 Status 05.2011
Loading...