HEGEL HD20 User Manual
Hegel HD20
High End D/A Converter
www.hegel.com |
info@hegel.com |
USER GUIDE
Congratulations on your new HEGEL!
Every Hegel product is based on a simple philosophy:
The audio reproduction instrument shall reproduce the original musical sound, purely and naturally.
It shall use Scandinavian design reflecting natural music reproduction and styling to fit in with any interior.
The products shall be easy to operate and shall be manufactured according to the best quality principles.
All HEGEL products are created with acoustical instruments in a concert situation as point of reference. The music is reproduced exactly like the original and is limited only by the quality of the recording.
Our aim is to give you the best possible music experience!
SOUND ADVICE
The Hegel HD20 High End Digital to Analog converter is easy to connect and operate, and requires no prior technical knowledge. However, to get the most out of the converter’s superior sound and music quality, we have provided a brief description of how to use the device in order to provide a total music experience.
We recommend keeping this user guide for future reference.
2
GENERAL USE – Front Panel
The HD20 DAC is controlled using the supplied RC7 system remote control
On/Off
The power switch is on the rear side of the D/A Converter, next to the mains input. When powered up, the HD20 will use 15 seconds to calibrate. During this time, the outputs will be muted.
NOTE: When powered up the outputs will be muted and the display will flash for approximately 15 seconds. This is normal, and is part of the start-up procedure.
3
Loading...