HeathCo WLC1901TRX Users Manual

OVERVIEW

The Lamp Module offers a quick and convenient way to
control the lights in your home. The module can be
programmed to a remote control, a garage door opener, or
a MyQ™ Gateway device. The module is compatible with
up to 5 Security✚

®

2.0 remote controls OR a combination

of up to 3 garage door openers or MyQ™ Gateway devices.
This product is NOT recommended for household
appliances.

SPECIFICATIONS
Bulb Type: Compact fluorescent, incandescent, halogen,

or LED
Bulb Wattage: Up to 150 Watts

Learn
Button

Power Button

Lamp
Outlet

LED

MODES OF OPERATION

The module can be programmed to a remote control, a garage door opener, or a MyQ™ Gateway device.

REMOTE CONTROL OPERATION:

Allows you to activate the
module from a remote
control.

GARAGE DOOR OPENER OPERATION:

Allows you to synchronize
the module with your garage
door opener light bulbs.

Example: The garage door
opener light bulbs are set to
automatically turn off after 4 ½ minutes, the
module will also turn off after 4 ½ minutes.

MyQ™ LAMP MODULE

MODEL 825LM

To prevent possible SERIOUS INJURY or
DEATH from electrocution or fi re, the light
control is ONLY for indoor use.

NOTICE: To comply with FCC and or Industry Canada rules (IC),
adjustment or modifications of this receiver and/or transmitter
are prohibited, except for changing the code setting or
replacing the battery. THERE ARE NO OTHER USER
SERVICEABLE PARTS.

Tested to Comply with FCC Standards for Home or office use.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.

MyQ™ GATEWAY OPERATION:
Allows you to activate the
module from a web
browser (requires a MyQ™
Gateway device).

INSTALLATION & PROGRAMMING

1

Plug the lamp into the module and plug
the module into an electrical outlet (the
LED on the module will flash). NOTE:

Make sure the lamp is switched ON.

4

Press the following (depending on the mode of operation):

Button on
Remote Control

Learn Button on
Garage Door Opener

2

If the lamp is not ON, press and release
the Power button on the module to turn
the lamp ON.

Learn Button on MyQ™
Gateway device

3

Press and release the Learn button on
the module (the LED on the module
will light).

The lamp’s light bulb will blink and the
LED on the module will turn OFF when the
device has been programmed.

TO ERASE ALL PROGRAMMING

Press and hold the Learn button on the module for 6 seconds. All
programming is now erased.

ONE YEAR LIMITED WARRANTY

The Chamberlain Group, Inc. warrants to the first retail purchaser of this
product that is free from defect in materials and/or workmanship for a
period of 1 year from the date of purchase.

114A4265 © 2011, The Chamberlain Group, Inc.
All Rights Reserved

1-800-528-9131

www.liftmaster.com

®

OVERVIEW

The Lamp Module offers a quick and convenient way to
control the lights in your home. The module can be
programmed to a remote control or a garage door opener.
The module is compatible with up to 5 Security✚
remote controls OR a combination of up to 3 garage door
openers. This product is NOT recommended for household

®

2.0

Learn
Button

appliances.

SPECIFICATIONS
Bulb Type: Compact fluorescent, incandescent, halogen,

or LED
Bulb Wattage: Up to 150 Watts

MODES OF OPERATION

The module can be programmed to a remote control or a garage door opener.

REMOTE CONTROL OPERATION:

Allows you to activate the
module from a remote control.

GARAGE DOOR OPENER OPERATION:

Allows you to synchronize the module with your
garage door opener light bulbs. Example: The garage

door opener light bulbs are set to automatically turn
off after 4 ½ minutes, the module will also turn off
after 4 ½ minutes.

LED

Power Button

Lamp
Outlet

LAMP MODULE

MODEL PILCEV

To prevent possible SERIOUS INJURY or
DEATH from electrocution or fi re, the light
control is ONLY for indoor use.

NOTICE: To comply with FCC and or Industry Canada rules (IC),
adjustment or modifications of this receiver and/or transmitter
are prohibited, except for changing the code setting or
replacing the battery. THERE ARE NO OTHER USER
SERVICEABLE PARTS.

Tested to Comply with FCC Standards for Home or office use.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.

INSTALLATION & PROGRAMMING

1

Plug the lamp into the module and plug the
module into an electrical outlet (the LED on
the module will flash). NOTE: Make sure

the lamp is switched ON.

4

Press the following (depending on the mode of operation):

Button on
Remote Control

Learn Button on
Garage Door Opener

2

If the lamp is not ON, press and release
the Power button on the module to turn
the lamp ON.

The lamp’s light bulb will blink and the LED on the module will
turn OFF when the device has been programmed.

3

Press and release the Learn button on
the module (the LED on the module
will light).

TO ERASE ALL PROGRAMMING

Press and hold the Learn button on the module for 6 seconds. All
programming is now erased.

ONE YEAR LIMITED WARRANTY

The Chamberlain Group, Inc. warrants to the first retail purchaser of this
product that is free from defect in materials and/or workmanship for a
period of 1 year from the date of purchase.

114A4275 © 2011, The Chamberlain Group, Inc.
All Rights Reserved

1-800-528-9131

www.chamberlain.com