Hearth and Home Technologies Sapphire Cast Iron User Manual

®
Sapphire
CaST irON
DireCT VeNT GaS STOVe
22-1/8"
14-5/8"
8"
28-5/8"
21-1/2"
17-1/2"
21-1/2"
14-3/8"
C
L
22-1/4"*
14-5/8"
8"
Rear Vent
C
L
6-1/4"
Top Ve nt
E
A
B
C
D
F
A
C
G
Sapphire shown with solitaire front and optional warming shelves with gold mitten rods
Sapphire
Dimensions
®
If heater is equipped with Hearth legs kit, center-line dimension is reduced by 3".
Side and top diagrams show heater equipped with optional Blower, part # 844-9030.
Brighten your home with the glow of a Sapphire. Tradi­tional cast iron construction is teamed with advanced flame technology to create a beautiful and functional gas heater. Our exclusive TrueGlow burner and a log set cast from real pieces of wood create a highly realistic flame. High efficiency and great heat output keep your heating costs low, too.
A number of options are available to suit your personal tastes. The unique Quartet front looks great with the doors opened or closed, or choose the cleaner open style of the Solitaire front (matte black only). Select the classic black, porcelain mahogany, baked enamel sienna bronze or willow finish, then add warming shelves for extra charm and functionality, a blower for improved heating, and even a remote control for convenience. And, with both top and rear direct-venting options, you can install your new Sapphire almost anywhere.
Standard Features
Strength & beauty of cast iron• Matte black finish• Top vent (optional rear)• Beautiful pyro-glo logs• Natural convection heater•
Black
Heats without power• Bedroom/mobile home approved• Limited lifetime warranty•
Options
Mahogany porcelain finish• Sienna bronze & willow baked enamel finish• Solitaire or Quartet fronts •
(Solitaire in matte black only)
Decorative firescreen •
(Quartet only)
Gold trim • (Solitaire only) Warming shelves• Warming shelf brackets with mitten rods • Variable speed blower• Rear vent conversion kit• Wall thermostat• Remote control•
Cover photo: Sapphire shown in porcelain mahogany finish with optional Quartet front
Sienna Bronze
(black or gold)
Mahogany
Willow
Clearances
A Side of stove top to side wall .................. 6"
B Rear of stove top to back wall ................. 3"
C Corner of stove top to side wall.............. 1"
D Minimum alcove height ....................... 54"
E Maximum alcove depth ....................... 36"
F Minimum alcove width ........................ 36"
G Mantle clearance from stove top .......... 23"
Technical & Performance Data
Width ................................21-1/2"
Height ...............................28-5/8"
Depth ................................ 17-1/2"
Weight (solitaire front) ....... 190 lbs.
Heating capacity ............................................................. Up to 1,500 sq. ft.*
Btu/Hour Input NG ...............................................21,000 − 30,000 Top Vent
18,000 − 26,000 Rear Vent
Btu/Hour Input LP ................................................24,500 − 30,000 Top Vent
20,000 − 26,000 Rear Vent
Efficiency .................................................................................. up to 84%**
Convection blower ...........................................................................160 cfm
The strongest in the industry, Quadra-Fire provides a limited lifetime warranty on gas-burning products for their most impor tant aspect s: firebox and heat exchanger.
For full warranty details go to www.quadrafire.com
IMPORTANT - READ BEFORE YOU INSTALL! Refer to the Owner/Installation Manual for complete clearance requirements and specifications. The images and descriptions in this brochure are provided to assist you in product selection only. *Heating capacity rating is to be used as a guideline only. Actual performance may differ slightly due to climate, building construction and condition, amount and quality of insulation, location of the heater, and air movement in the room. **Canadian: P.4.1-02 64.08% NG/65.42% LP.
Quadra-Fire is a registered trademark of Hearth & Home Technologies. Product specifications and pricing subject to change without notice. The Quadra-Fire Sapphire direct vent gas appliance listed to ANSI standard Z21.88a-2000/CSA 2.33a-M00 Vented Gas Fireplace Heaters and applicable sections of UL307b Gas Burning Heating Appliances for Manufactured Homes and Recreational Vehicles, CAN/CGA 2.17-M91 “Gas Fired Appliances for Use at High Altitude,” by OMNI-Test Laboratories, Inc., Beaverton, OR.
Flue size ..............................6-5/8"
Standing pilot ignition .............. Yes
Mobile home approved ............ Yes
Bedroom approved...................Yes
Available From:
1445 North Highway, Colville, WA 99114
www.quadrare.com•800-926-4356
QDF-1006U-1108
Loading...