NorthStar
EPA Phase II
Woodburning Fireplace
™
NorthStar Specifications
MODEL HEIGHT FRONT WIDTH BACK WIDTH DEPTH VIEWING AREA
Actual Framing Actual Framing Actual Framing Actual Framing
NorthStar
Top View
Corner Installation
44-7/16"
43-13/16 43-7/8 40 42 40 42 23-1/8 24
23-5/8"
62-13/16"
11-1/8"
42"
88-7/8"
Top View
23-1/8"
Front View
29-1/4 x 16-3/4
Side View
Framing
2"
43-7/8"
24"
Dimensions above are in inches, and for reference only. We recommend measuring individual units at installation. Assumes the use of 1/2" Sheetrock. NOTE: Combustible material
should not be installed over the face of the fireplace. Make sure you do NOT cover the decorative door opening.
Product information is not complete and is subject to change without notice. Product installation must adhere strictly to instructions accompanying product to avoid risk of fire
and potential injury. Actual product appearance, including flame, may differ from product images.
NorthStar
TM
42"
Meets the strictest environmental standards in the country. Now you
can love the environment and love a woodburning fireplace, all at the
Position mantel
60” from base of
the fireplace
43-13/16"
40-5/16"
37"
40"
Decorative Fronts
The doors are available in all black or black with brushed
nickel trim.
3-1/2"
31-1/ 8"
1"
5-7/8"
9-11/16"
Fan Electrical Access,
(right side of fireplace)
6-1/2"
See Page 10
same time. Certified to the EPA Phase II criteria, NorthStar can be
installed in areas where conventional woodburning fireplaces are banned.
It burns clean. Burns efficient. In fact, it delivers over 50,000 Btus of heat
per hour for up to 10 hours with over 77.8% efficiency.*
• EPA Certified to 51,400 Btu/hour–Actual output up to 70,000 Btu/hour;
environmentally friendly–can operate in woodburning-restricted areas.
Generous heat output.
• Air-tight ceramic glass doors–Maintain energy efficiency and clean burn.
• Cast iron door and grilles
• Fully insulated firebox–Keeps warm air in and cold air out.
• Dual blowers standard–Heat circulation, maximum air flow
• Arched steel face
• Firebrick lining–Authentic masonry look and enhanced heat radiation.
• Optional Heat Zone kit
* Btu’s of cord wood fuel are to be used as a guideline only and may differ due to type
of wood and moisture content.
For warranty details, go to www.heatnglo.com.
For complete information on this model, please contact us at:
Black with brushed nickel trim
Heat Zone
®
Heat Zone climate control system turns your fireplace into a
flexible, energy-saving heat source by transferring excess heat
from your fireplace to other areas of your home.
A brand of Hearth & Home Technologies, Inc.
20802 Kensington Boulevard, Lakeville, MN 55044
Web: heatnglo.com
Phone: (888) 427-3973 (952) 985-6000
E-mail: info@heatnglo.com
HNG-1035U-1206