Health O Meter 205HR User Manual

205HR

HIGH-STRENGTH WALL-MOUNTED

HEIGHT ROD

P/N UM205HR Rev20160913

USER INSTRUCTIONS

1

205HR

Thank you for your purchase of this Health o meter® Professional product. Please read this manual
carefully, and keep it for easy reference or training.

TABLE OF CONTENTS

CAUTIONS AND WARNINGS ............................................................................................. 3

SPECIFICATIONS .............................................................................................................. 3

CERTIFICATIONS / DISPOSAL / SERVICE ....................................................................... 4

WALL MOUNT INSTRUCTIONS ......................................................................................... 5

HEIGHT MEASUREMENT INSTRUCTIONS ....................................................................... 10

MAINTENANCE .................................................................................................................. 11

WARRANTY ........................................................................................................................ 12

Please register your product for warranty coverage at:

www.homscales.com

For User Instructions updates and revisions please go to:

www.homscales.com

2

CAUTIONS AND WARNINGS

SPECIFICATIONS

Height Range

Height rod measurement range: 55.5” (141 cm) Measuring
tape range: 0”- 90” /0 cm - 230 cm

Environmental

Operating temperatures: 5°C to 40°C (41°F to 104°F)
Storage temperatures: 0°C to 50°C (32°F to 122°F)

Graduation

1 mm (1/16”)

Physical Dimensions

Width: 2.625” / 6.7 cm
Depth: ¾” / 1.9 cm
Height: 60” / 152.4 cm
Headpiece Depth: 8” / 20 cm

To prevent injury and damage to your product, please follow these instructions very carefully.

 For accurate measurement, the 205HR must be affixed to a stable wall surface.
 For accurate measurement, verify proper operation according to the procedure described in this manual

before each use.

 Do not use in the presence of flammable materials.
 When wall mounting the 205HR, ensure that the mounting location is free of electrical lines, gas pipes, and

other safety hazards. Ensure that the wall is of construction that can support the 205HR.

 To prevent patient injury, the patient must be attended throughout the entire measuring event.

GENERAL

The 205HR High-Strength Wall-Mounted Height Rod has a large headpiece and features an indicator that
allows for accurate measurement of a patient’s height. Each 205HR is designed to determine the height of a
stationary patient. Height is displayed in centimeters only on one side of the tape or centimeters and feet/inches
on the reverse side.

205HR SPECIFICATIONS

3

CERTIFICATIONS / DISPOSAL / SERVICE

Pelstar, LLC has been officially certified as a manufacturer of
Health o meter® Professional medical devices to be in
compliance with stringent ISO requirements. The Pelstar, LLC
quality assurance system covers the development,
production, sales and service of medical scales and
measuring systems.

CERTIFICATION DESCRIPTIONS

205HR DISPOSAL

This Health o meter® Professional product must be disposed of properly. Follow the
national, regional or local regulations which apply to you for disposal of domestic waste.

SERVICE INFORMATION
The 205HR High-Strength Wall-Mounted Height Rod is shipped disassembled in one box.
Carefully inspect the carton for shipping damage before unpacking. If damage is found,
contact Customer Service immediately.

For further information or telephone support, please contact a Health o meter® Professional
Customer Service representative at 1-800-815-6615.

4