Headrush FRFR-112 User's Guide
User Guide
Guía del usuario
Guide d’utilisation
Guida per l’uso
Benutzerhandbuch
Appendix
English (2–6)
Español (7–11)
Français (12–16)
Italiano (17–21)
Deutsch (22–26)
English (27)
User Guide (English)
Introduction
Thank you for purchasing the FRFR-112. At HeadRush, we know how serious music is to
you. That’s why we design our equipment with only one thing in mind—to make your
performance the best it can be.
Box Contents
FRFR-112
Power Cable
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit headrushfx.com.
For additional product support, visit headrushfx.com/support.
2
Setup
Items not listed under Introduction > Box Contents are sold separately.
Example A: One FRFR-112 (Mono)
Connect the Left (Mono) output of your HeadRush Pedalboard to the input on an FRFR-112.
Guitar
Power Outlet
3
Example B: Two FRFR-112s (Stereo)
Connect the Right and Left (Mono) outputs of your HeadRush Pedalboard to the inputs
of your FRFR-112s.
(from Right
channel)
Guitar
(from Left (Mono)
channel)
Surge Protector
4
Example C: Two FRFR-112s (Mono)
Connect the Left (Mono) output of your HeadRush Pedalboard to the input of one FRFR-
112, and then connect the output of that FRFR-112 to the input of another.
(from Left (Mono)
channel)
Guitar
(from Output)
Surge Protector
5
Features
Rear Panel
1. AC Input: Use the included power cable
to connect this input to a power outlet.
Make sure the Power Switch is set to
off when connecting or disconnecting
the cable.
2. Fuse: If the unit’s fuse is broken, lift this
tab to replace the fuse. Replace it with a
fuse with an appropriate rating (printed
under the unit’s power cable input).
Using a fuse with an incorrect rating can
damage the unit and/or fuse.
3. Power Switch: Use this switch to power
the loudspeaker on or off. Make sure the
Volume knob is set to its minimum
(counterclockwise) position before turning
it on.
4. Power LED: This LED lights up when the
loudspeaker is on.
5. Volume: Turn each knob to adjust the
volume of each input.
6. Input: Use a standard XLR cable or 1/4”
(6.35 mm) TRS cable (not included) to
connect your audio source to this input.
7. Output: Use a standard XLR cable (not
included) to connect this output to the
input of another loudspeaker (i.e., another
FRFR-112).
8. Signal Limit LED: This LED lights up
green when an audio signal is sent to the
loudspeaker—it flashes at lower levels
and lights solidly at higher levels. The
LED lights up red when output
limit/protection is active—if the LED is lit
red continuously, reduce the volume of
your audio source.
9. Contour: Engage (depress) this button to emphasize low and high frequencies by
+3 dB. Disengage (raise) the switch for a flatter response for live performance or for
maximum output.
10. Ground Switch: Engage (depress) this switch to reduce hum or noise.
5
6
1
2
5
6
4
8
9
10
7
3
6
Guía del usuario (Español)
Introducción
Gracias por comprar el FRFR-112. En HeadRush, sabemos que usted se toma la música
en serio. Por eso es que diseñamos nuestros equipos con una sola cosa en mente—hacer
que pueda tocar su mejor interpretación.
Contenido de la caja
FRFR-112
Cable de corriente
Guía del usuario
Manual sobre la seguridad y garantía
Soporte
Para obtener la información más reciente acerca de este producto (documentación,
especificaciones técnicas, requisitos de sistema, información de compatibilidad, etc.) y
registrarlo, visite headrushfx.com.
Para obtener soporte adicional del producto, visite headrushfx.com/support.
7
Instalación
Los elementos que no se enumeran en Introducción > Contenido de la caja se venden
por separado.
Ejemplo A: Un FRFR-112
Conecte la salida Left (Mono) de su HeadRush Pedalboard a la entrada de un FRFR-112.
Toma de
corriente
Guitarra
8
Ejemplo B: Dos FRFR-112s (estéreo)
Conecte las salidas Right y Left (Mono) de su HeadRush Pedalboard a las entradas de
sus FRFR-112.
(desde el canal
Right)
Guitarra
(desde el canal
Left (Mono))
sobrevoltajes transitorios
Protector contra
9
Loading...