HDT H168 User Manual

USER MANUAL

Handheld 3 Axis Gimbal Stabilizer

H2

3 Axis Parameter & Indicator Light

2700

1800

3200

NO.2 Motor（Roll）

NO.3 Motor（Tilt）

NO.1 Motor（Pan）

Indicator Light：

Instruction is received and executing.

Working well in normal voltage.

Low voltage，flashing is too low to shutdown.

When stabilizer overloaded，red&blue light will flashing, motor will stop output and

try output after 10 seconds. If keeping failed after 5 times, stabilizer enter self protection
（Mainly related to phone weight balance）.

System is working abnormally.

Product Overview:

Knob:

--tighten when

clockwise rolling.

--loosen when

counter clockwise

rooling

Attention!

Please install smartphone or action camera first
before power on.

When using IPhone6, IPhone7, IPhone8,
pull guide holder to innermost position.

When using IPone6 Plus, IPone7 Plus, pull
guide holder to middle.

Please adjust guide holder position
according to your phone weight.

In the bottom, there is a 1/4 thread inside to connect with
self-stick and other accessories.