Hayter Mowers Harrier 48 User Manual

Page 1
Harrier 48
CODES
490D 491D
Auto Drive
(Variable Speed)
Auto Drive
(Variable Speed)
(Electric Start)
OWNER'S HANDBOOK
(English Version)
490D 260000001 491D 260000001 ISSUE 07.02.06
Page 2
R
1
2
3
4
6
5
7
8
9
11
12
13
14
15
16
17
18
19
490TH01 A
10
20
Main Features
Specifications
MAIN FEATURES /SPECIFICATIONS
1.2
Code 490 491
Engine Briggs & Stratton Quantum Briggs & Stratton Quantum
Engine type 12F8022055B1 12F8072054B1
Fuel type Unleaded petrol Unleaded petrol
Fuel capacity 1.5 litres 1.5 litres
Oil type SAE 30 engine oil SAE 30 engine oil
Oil sump capacity 0.6 litres 0.6 litres
Cutting width 480mm 480mm
Cutting height 13 - 60mm 13 - 60mm
Overall dimensions 1,510 x 507 x 1080mm 1,510 x 507 x 1080mm
Dry Weight 46.5 Kg 49 Kg
1. Spark Plug Lead.
2. Engine Cover.
3. Air Cleaner.
4. Fuel Filler Cap.
5. Oil Filler Cap and Dipstick.
6. Serial No.Label.
7. Handlebar Securing Knob.
8. Engine Start-Grip.
9. Throttle Control
10. Key ( 491 only )
11. Engine Stop Lever.
12. Handlebar.
13. Ground Drive Clutch Lever.
14. Variable Speed Control ( see note )
15. Grassbag Assembly.
16. Grassbag Cover.
17. Deflector.
18. Exhaust Guard
19. Height of Cut Adjuster.
20. Battery ( 491 only )
Note: Item 14 should only be operated whilst the engine is running or the cable will be damaged.
Page 3
1ST Year (12 months)
We certify that this service has been carried out by an Authorised Hayter
Service Dealer
Date:
1ST Year (12 months)
Owner’s Name:
Serial Number:
Date:
2nd Year (24 months)
We certify that this service has been carried out by an Authorised Hayter
Service Dealer
Date:
Owner’s Name:
Serial Number:
Date:
Note for dealer: Please retain this voucher for your records.
Note for dealer: Please retain this voucher for your records.
2nd Year (24 months)
Page 4
Page 5
1.2 Main Features/Specifications
1.5 Contents
1.6 Introduction
1.7 Warranty
1.8 - 1.11 Safety Precautions
1.8 - Training
1.8 - 1.9 - Preparation
1.9 - 1.10 - Operation
1.10 - Maintenance and Storage
1.11 - Safety Symbols
1.11 - Decal Symbols
1.12 Assembling the Mower
1.12 - Delivery Checklist
1.12 - Handlebar
1.12 - Grassbag Attachment
1.13 Before Starting the Mower
1.13 - Prevent Engine Damage
1.13 - Oil Type
1.13 - Check Oil Level
1.13 - Fuel Type
1.14 - 1.19 Operating The Mower
1.14 - Controls
1.14 - Starting
1.15 - Electric Start
1.15 - Forward Travel
1.15 - Turning
1.15 - Stopping
1.16 - Slopes
1.16 - Height of Cut
1.16 - Before Mowing
1.16 - Grassbag
1.17 - Without Grass Collection
1.17 - Heavy Growth
1.17 - Friction Disc
1.17 - Non-Grassed Areas
1.18 - 1.19 - Lawn Care Calendar - Guide Only
1.19 - Lawn Stripes
1.20 Maintenance Schedule
1.5
1.21 - 1.28 Mower Maintenance
1.21 - Engine
1.21 - Throttle Cable Adjustment
1.21 - Carburettor Adjustments
1.22 - Oil Service
1.22 - Air Cleaner Service
1.23 - Spark Plug Service
1.23 - Keeping Engine Clean
1.23 - Grassbag
1.24 - Deck Housing
1.24 - Securing Nuts and Bolts
1.24 - Clutch Cable Adjustment
1.25 - Lubrication
1.25 - Cutterblade Removal
1.26 - Cutterblade Assembly
1.26 - Cutterblade Sharpening
1.27 - Storage
1.28 - Battery Charging
1.29 - 1.30 Trouble Shooting
1.31 Declaration of Conformity
1.32 - 1.36 Parts List
1.32 - Parts List - Upper
1.33 - Exploded View - Upper
1.34 - 1.35 - Parts List - Lower
1.36 - Exploded View - Lower
1.37 - 1.39 Notes
1.40 Customer Info/Notes
CONTENTS
Page 6
1.6
INTRODUCTION
Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your machine.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls and points of regular maintenance. If you have any doubts, consult your local Hayter authorised dealer who will be pleased to give you assistance.
IMPORTANT: This mower is designed solely for use in a domestic grass cutting environment. Use in any other way is considered as contrary to the intended use. Compliance with and strict adherence to the conditions of operation, service and repair as specified in this handbook also constitute essential elements of the intended use. This mower should be operated, serviced and repaired only by persons who are familiar with its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations on safety must be observed at all times. Any arbitrary modifications carried out to this machine may relieve Hayter Limited of liability for any resulting damage or injury.
Hayter mowers are robustly constructed and designed for efficient economical performance under normal mowing conditions. Correct operation and maintenance will ensure a long and satisfactory service life. Prior to despatch from our factory every effort is made to ensure that your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the han­dlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
HAYTER LIMITED reserve the right to amend product specifications without prior notification.
Page 7
1.7
WARRANTY
LIMITED WARRANTY
Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects
in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. To qualify for the full benefit of the warranty, the warranty registration card must be returned within 14 days of purchase. Subject to the conditions and exclusions noted in this limited warranty, we shall at our option, repair or replace any warranted part during the applicable period. If you are in doubt or experience any difficulty, please consult a Hayter Authorised Service Dealer for clarification.
To qualify for the extended warranty (second and third year) of the three year limited warranty the machine must have annual services carried out by an Authorised Hayter Service Dealer. These chargeable services should be carried out within 12 and 24 months of the date of purchase.
Excluded from the extended warranty period are those items which are subject to normal wear and tear e.g. tyres, wheels, cutterblades, belts, cables, grassbags, sweeper/brushes, batteries and other consumable wearing parts.
All consumer machines which are fitted with a genuine Hayter friction disc as original equipment before use, are covered by a Lifetime Warranty against the engine crankshaft bending. Note: friction washers, blade brake clutch (B.B.C) units and other such devices are not applicable. Only machines fitted with a genuine Hayter friction disc, which are used in accordance with the recommended operating and maintenance procedures, are covered.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does not cover minor mechanical adjustments unless they are due to defective material or workmanship. Consult the Owner’s Handbook or a Hayter Authorised Service Dealer for assistance when making these adjustments.
A warranty period of 90 days applies to machines used for commercial purposes.
To make a warranty claim, return the unit to a Hayter authorised dealer along with proof of purchase stating the machine serial number and date of purchase. The service receipt(s) or this Owners Handbook with the 1st/2nd year service boxes fully completed, must be produced as proof of entitlement to the extended warranty period. Subject to the conditions and exclusions in this limited warranty, the authorised dealer will, at our option, repair or replace any warranted part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to which you may be entitled and your statutory rights are not affected by this warranty. If you need additional information concerning this written warranty, or assistance in obtaining services, please write to : HAYTER LIMITED, Service Department, Spellbrook, Bishop’s Stortford,
Hertfordshire CM23 4BU
UK ONLY: Details of your local Hayter authorised dealer are contained in Yellow Pages and
the Hayter website www.hayter.co.uk or contact contact:- Freephone 0800 616298.
Issue: 05.09.03
Page 8
1.8
SAFETY PRECAUTIONS
This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others.
Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury.
Before using the mower read the owners handbook carefully. Pay par­ticular attention to the safety precautions. Ensure that you are familiar with the controls and the proper use of the equipment. Learn how to stop the mower quickly in an emergency.
Never allow children or people unfamiliar with these instructions to use the mower.
Never mow while people, especially children, or pets are nearby.
Keep in mind that the user is responsible for accidents or hazards occurring to other people or their property.
While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when barefoot or wearing sandals.
Thoroughly inspect the area where the mower is to be used and remove all objects which may be thrown by the machine.
WARNING: Petrol is highly flammable.
- Store fuel in containers specifically designed for this purpose.
- Before starting the engine add fuel outdoors only. Never remove the cap from the fuel tank or add petrol while the engine is running or when the engine is hot. Allow the engine to cool for at least two min­utes before refuelling. Do not smoke while refueling.
- Do not attempt to start the engine if petrol is spilled or a smell of petrol is present. Move the mower away from the area of spillage and avoid creating any source of ignition until petrol vapours have dissipated.
- Replace faulty silencers.
Safety Alert Symbol
Preparation
Training
Page 9
1.9
PRECAUTIONSSAFETY
- Always use fresh fuel. Stale fuel can block the carburettor and cause leakage.
- Replace fuel tank and oil tank caps securely.
A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immedi­ately with a genuine Hayter replacement part
Do not operate the engine in a confined space where exhaust fumes (carbon monoxide) can collect. Refuel outdoors only and do not smoke while refuelling.
Always pull the starter cord slowly until resistance is felt. Then pull the cord rapidly to avoid kickback and prevent hand or arm injury.
Mow only in daylight or good artificial light.
Avoid using the mower on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Mow across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not mow excessively steep slopes of more than 20 degrees.
Use extreme caution when reversing or pulling the mower towards you.
Stop the engine before moving the mower across areas other than grass.
Never operate the mower unless the guards are securely in position and in good condition.
Do not change the engine governor settings or overspeed the engine.
Disengage the rear roller drive clutch before starting the engine.
Start the engine carefully, with feet well away from the cutterblade.
Operation
Preparation
Page 10
1.10
Do not tilt the mower when starting the engine.
Do not put hands or feet near or under rotating parts.
Never pick up or carry the mower while the engine is running.
Never lift the rear deflector while the engine is running.
Never touch the exhaust/exhaust guard or cooling fins when the engine is hot.
Stop the engine and disconnect the spark plug lead:
- Before clearing blockages or unclogging the discharge chute.
- Before cleaning/checking or working on the mower.
- After striking a foreign object. Inspect the mower for damage and ensure necessary repairs are made before re-starting.
- If the mower starts to vibrate abnormally (check immediately).
Stop the engine:
- Whenever you leave the mower.
- Before refuelling.
- Reduce throttle control setting during engine shutdown.
Keep all nuts, bolts and screws tight to ensure that the equipment is in safe operating condition.
Frequently check fuel lines and fittings for cracks or leaks and replace if necessary.
Never check for a spark when the spark plug is removed. (Use approved tester)
Inspect the exhaust periodically and replace if worn or leaking.
Never crank the engine with the spark plug removed.
Never start the engine with the air-cleaner or air-cleaner cover removed.
Never store the mower with petrol in the tank within an enclosed area where fumes may reach an open flame or spark.
Caution: Use extreme care when removing spring loaded compo­nents, Height of Cut Adjuster Mechanism, Two Piece Connecting Rod.
SAFETY PRECAUTIONS
Operation
Maintenance & Storage
Page 11
1.11
SAFETY PRECAUTIONS
Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease.
Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done outdoors and when the engine is cool.
Wear strong work gloves when removing and reassembling the cut­terblade.
Always replace worn or faulty parts with genuine Hayter parts.
Maintenance & Storage
Safety Symbols
Safety Alert - Be aware to the possibility of injury.
Danger of severing toes or fin­gers in cutting mechanism.
Carefully read the Owners Handbook before using the machine.
Danger of being hit by thrown objects.
Stop engine and remove spark plug lead before working on the mower.
Keep bystanders at a safe dis­tance from the mower.
Engine Stop
(Symbol)
Height of Cut Adjustment
(Symbol)
Throttle Control
(Symbols)
Information Symbols
STOP
305113
CS198
Slow Fast Choke
Variable Speed Control
(Symbol)
56Cth13a
Slow Fast
Page 12
Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer.
1. Engine Handbook. 3. Charger (491)
2. Grassbag. 4. Ignition Key (491)
To prevent accidents cut off the long ribbon attached to the grass­bag and discard.
(491 Only) Note: Prior to first use please fully charge the battery for 14 hours. (Refer to battery charging)
Unscrew the handlebar securing knobs sufficiently to allow the handle­bar to pivot. Hold the engine stop lever in towards the handlebar and unfold the handlebar to the operating position, before releasing. Tighten both handlebar knobs to secure in position.
Take care to ensure that the control cables do not become snagged at the pivot point.
Raise the rear deflector, lower the grassbag and hook in position. Lower the deflector to rest on the grassbag.
1.12
ASSEMBLING THE MOWER
Handlebar
Delivery Checklist
Grassbag Attachment
Page 13
1.13
MOWERTHESTARTING
To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine.
Always use high quality detergent oil classified SAE 30 oil. Never use additives with recommended oil. To prolong the life of your engine it is important that the oil is changed after the first 5 hours of use - refer to ‘Maintenance Schedule’.
Clean around the oil filler cap before removing. With the mower on a level surface, unscrew and remove the oil filler - dipstick. Wipe oil from it with a clean cloth. Screw the oil filler - dipstick back in place, then unscrew and remove it to check the oil level.
The oil level is correct when it is at the full mark on the dipstick.
DO NOT OVERFILL.
Always use clean, fresh unleaded petrol. Purchase fuel in quantities that can be used within 30 days. Never mix oil with petrol. For added engine protection Briggs & Stratton recommend the use of their fuel additive which is available from an authorised Briggs & Stratton ser­vice dealer.
Fill to base of neck to allow for fuel expansion. Do not overfill the fuel tank.
Prevent Engine Damage
O
I
L
ADD FULL
0.15 Litres
Oil Type
Check Oil Level
Fuel Type
BEFORE
Page 14
1.14
Controls
Operate all control levers several times and ensure that the cables move freely. Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘choke position.
IMPORTANT: To avoid damage to the cable the Variable speed Control should only be operated whilst the engine is running.
Move the throttle control lever to the ‘choke position before start­ing a cold engine. Move the throttle control lever to the ‘fast’ posi- tion before starting a warm engine.
Stand behind the mower and hold the handlebar together with the engine stop lever with your left hand. With your right hand hold the engine start - grip and pull slowly until resistance is felt, then pull rapidly to crank the engine. Carefully return the start grip to the stor­age position when the engine starts. If the engine does not start after 5 attempts - refer to “Trouble Shooting”.
The engine stop lever must be held firmly against the handlebar to start and keep the engine running. If the engine stop lever is released the engine will stop.
Allow the engine to warm up and move the throttle lever to the ‘fast position after starting a cold engine.
To prevent damage never pull the engine start grip when the engine is running.
Starting - Step 1
OPERATING THE MOWER
Step 2
Step 3
Page 15
1.15
MOWERTHEOPERATING
(Electric start Only)
Stand behind the mower and hold the handlebar together with the engine stop lever. Turn the ignition key in a clockwise direction and hold in position to crank the engine. When the engine starts release the key and move the throttle to the fast position after starting a cold engine. Note: Cranking the engine for more than 15 seconds in any one minute can damage the starter motor. If necessary the engine can be started manually without using the igni­tion switch.
To prevent engine damage do not operate the ignition key when the engine is running.
Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward direction.
When the ground drive clutch lever is disengaged the mower may be pushed. This feature is useful when mowing in confined areas.
Ground speed may be adjusted by operating the variable speed control. Push forward to slow down and pull back to speed up. Only operate the lever with the engine running to prevent damage.
If the engine stop lever is released the engine will stop.
To make a wide turn steer the mower with the handlebar in the direc­tion required. To make a tight turn release the ground drive clutch lever, apply down­ward pressure on the handlebar to raise the front wheels just above ground level and steer in the required direction.
To prevent accidents do not raise the front of the mower exces­sively when making a turn. Never raise the rear of the mower when the engine is running.
Release the ground drive clutch lever, reduce the throttle setting and release the engine stop lever.
Emergency stop: Release both ground drive clutch lever and engine stop lever together.
If the engine fails to stop, move the throttle lever to the ‘slow’ posi­tion and disconnect the spark plug lead.
1CG480V01B
Forward Travel
Turning
Stopping
STOP
Electric Start
Page 16
1.16
To prevent engine damage do not use the mower on slopes greater than 20 degrees.
To adjust the height of cut: Grip the lever and pull sideways to dis-
engage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Finally release the lever at the required position and ensure it locks firmly into one of the eight set­ting notches. Always select a height of cut to suit operating conditions. Aim to pre­vent engine overloading and blockages by avoiding low cuts in long grass conditions. Be prepared to make two cuts when the grass is long.
To prevent accidents, thoroughly inspect the area and remove all objects which when contacted by the mower cutterblade could become dangerous projectiles. Inspect the area for hidden obstruc­tions which when contacted by the cutterblade could risk health and safety or result in damage to the mower. Remember the loca­tion of these obstructions and ensure that you mow around them.
Raise the rear deflector and lift the grassbag and lower the rear deflec­tor to rest against the rear of the mower.
To empty the grassbag, pour out the grass clippings and shake the grassbag vigorously to clean the airways. Good grass collection depends on good air flow through the grassbag. When collecting grass clippings it is important that the grassbag is emptied regularly to pre­vent blockages and engine overloading.
Height of Cut
Before Mowing
305113
Grassbag
OPERATING THE MOWER
Slopes
Page 17
1.17
Remove the grassbag and operate the mower with the rear deflector in the closed position.
Areas of heavy growth should be mown without collecting the clip­pings. If collection is required, first mow the area without the grassbag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum height of cut setting with the grassbag fitted. Reduce the height of cut and mow the area again as necessary until the required finish is obtained.
To prevent damage to your lawn do not remove more than one third of grass height in one cut.
The cutterblade is driven by the engine via a friction disc to help pre­vent damage occurring to the engine crankshaft and cutting mecha­nism when a hidden obstruction or overload is encountered.
Always stop the engine when a hidden obstruction or excessive vibra­tion is encountered. Disconnect the spark plug lead and examine the cutting mechanism. ALWAYS replace a damaged cutterblade - refer to “Maintenance”.
When moving the mower across non-grassed areas, stop the engine and set the mower to the maximum height of cut to protect the cutting mechanism.
Heavy Growth
Friction Disc
305113
Non-Grassed Areas
STOP
MOWERTHEOPERATING
CS386
Without Grass Collection
Page 18
1.18
There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged.
Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary.
The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made. The first cut should merely “top” the grass as close cutting at this stage could result in severe yellowing or browning. Two cuts are generally suffi­cient this month.
Mow often enough to stop grass growing away. Dig out patches of coarse grass or resistant weed. Re-seed bare patches.
Keep mowing increasing the frequency as required. Treat with selec­tive weed killers or combined weed/feed preparations if you did not feed the lawn in April.
Summer mowing should now be under way. It should be necessary to mow the lawn twice a week. Raking before mowing is important this month as the combined action keeps runners of clover under control. Water the grass if necessary, and remember to soak thoroughly.
Treat the grass with the second application of fertiliser or weed killer/fertiliser. Water when necessary and rake occasionally. As a gen­eral rule the grass clippings should be removed each time you mow. If weather conditions are dry and hot and the grass is weed free, leave the clippings on the lawn to help maintain ground moisture.
January
LAWN CARE CALENDAR
February
March
April
May
June
July
To be used as a guide only.
Page 19
1.19
Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath­er conditions leave the grass longer to help retain ground moisture.
Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow.
Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sand.
Use a stiff broom to disperse worm casts before mowing. Keep turf free from leaves.
Apart from brushing away leaves, December is a slack end of a busy year. Keep off the lawn if it is very wet or frozen.
The way to achieve a neat striped effect is for the lawn being cut in parallel stripes, alternate stripes being mown in opposite directions. A much more important routine is to cut at right angles to the line of the previous mowing. If the work has been carried in a north-south line, then the next cutting should be in an east-west direction. The cross­cutting keeps down the coarse weed grasses.
To prevent grass damage do not remove more than one third of the grass height in one cut.
CALENDAR
August
LAWN CARE
September
October
November
December
1
2
1CG480V05A
Lawn Stripes
Page 20
1.20
Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass.
After the very first five hours change the engine oil
Check the oil level
Remove grass debris from around the engine, exhaust/exhaust guard, air ways in the top cowl and underside of the deck housing.
Remove grass debris from the grassbag and check for signs of damage.
Check the condition of guards and safety devices.
Check condition of cutterblade.
Change the engine oil if continuously operating under heavy load or high ambient temperature.
Service the air cleaner.
Lubricate wheels, pivot points and linkages and grease the inner con­trol cables at point of entry and exit from their outer casing.
Check the clutch cable adjustment.
Sharpen the cutterblade.
Change the engine oil.
Clean the engine cooling system. Clean more often under dusty condi­tions or when airborne debris is present or after prolonged operation whilst cutting tall, dry grass.
Replace the spark plug.
MAINTENANCE SCHEDULE
100Hrs or Every Season
25Hrs or Every Season
Daily
50Hrs or Every Season
First 5Hrs
Page 21
To prevent accidents stop the engine and disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower.
1. Air Cleaner
2. Fuel Cap
3. Start Grip
4. Cover
5. Oil fill/Dipstick
6. Exhaust Guard
7. Exhaust
8. Spark Plug / Lead
9. Carburettor
Loosen casing clamp screw (1) and move the governor lever (2) in the direction of screw (1) as far as possible. Move the throttle control to the choke position. Tighten casing clamp screw.
Should only be made by an authorised Briggs & Stratton dealer. Under no circumstances should the engine be adjusted to run at a speed in excess of that shown on the Declaration of Conformity.
1.21
MOWER
490TH14 A
7
1
8
9
6
5
3
4
2
2
1
Engine
Throttle Cable Adjustment
Carburettor Adjustments
MAINTENANCE
Page 22
1.22
Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower’ for oil checking and filling instructions.
Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:-
1. Drain fuel by running the engine until the fuel tank is empty.
2. Remove the spark plug lead.
3. Allow the engine to cool.
4. Drain the oil while the engine is warm (not hot).
5. Tip the mower over on to its left hand side thus ensuring that
the air cleaner is kept uppermost to prevent engine damage.
6. Remove the oil filler dipstick and drain the oil into a suitable
container.
7. Refill with new oil of the recommended SAE viscosity grade.
(Refer to-‘Before Starting the Mower’)
To service the air cleaner, loosen screw (1) and remove cover (2).
Remove cartridge (3) and clean by tapping gently on a flat surface. If very dirty, replace.
- Do not use petroleum solvents.
- Do not use pressurised air.
- Do not oil the cartridge.
After servicing, install the cartridge into the cover. Insert the tabs on the bottom of the cover into the slots in the bottom of the base (4). Tilt the cover upwards and securely tighten the screw to the base.
MOWER
3CG30
1
2
3
4
Oil Service
Air Cleaner Service
MAINTENANCE
Page 23
1.23
Use only Briggs & Stratton spark tester (1) to check for a spark as shown in the diagram.
Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Briggs & Stratton service dealer.
Check the spark plug gap with a feeler gauge and set at 0.50mm.
Remove all grass and debris from the engine including the exhaust/exhaust guard, the air ways in the top cowl and the surround­ing deck areas on a daily basis after use. Never spray the engine with water during cleaning. Water can contaminate the fuel. Always clean with a brush or compressed air.
Grass and debris may clog the engine’s air cooling system especially after prolonged operation while cutting tall, dry grass. The internal cool­ing fins and surfaces may require cleaning to prevent overheating and engine damage. We recommended that this service be carried out by an authorised Hayter Service dealer.
Remove grass debris from the grassbag immediately after use and check its condition for signs of damage.
To prevent accidents replace a damaged grassbag immediately.
1
Spark Plug Service
Keeping Engine Clean
Grassbag
MOWER MAINTENANCE
Page 24
Remove grass debris from the top and underside of the deck housing immediately after use.
Fertilisers and top dressings are particularly corrosive. Thoroughly clean the mower deck immediately after use on treat­ed grass and store well away from corrosive materials.
Regularly check that all securing nuts and bolts are tight. Replace missing or damaged items immediately.
Check the clutch cable operation after the first hour and then every 25 operating hours and adjust if necessary. The clutch cable is adjusted correctly when the drive engages with the clutch lever positioned 55­70mm from the handlebar.
Unscrew the lock nuts and screw the adjuster (2) in or out as necessary. Tighten the locknuts (1) when correctly adjusted.
1.24
55-70mm
1CG480V36B
Securing Nuts & Bolts
Deck Housing
Clutch Cable Adjustment
MOWER
MAINTENANCE
1
2
Page 25
Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours.
Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing.
Drain the fuel by running the engine until the fuel tank is empty and the engine stops. Remove the spark plug lead and allow the engine to cool. Turn the mower on its left hand side and ensure that the air clean­er side of the engine is uppermost. Firmly grip the end of the cutterblade with the gloved hand and remove the bolt, spring washer and distance piece securing the cutterblade with a 9/16” A/F spanner.
To prevent accidents never work on the cutterblade unless the spark plug lead has been removed. The cutterblade has sharp edges. ALWAYS wear strong gloves to protect your hands when working on the cutterblade. DO NOT rotate tools towards the cut­ting edges to avoid the risk of injury should the tool slip. ALWAYS use genuine Hayter replacement parts.
The condition of the cutterblade and its mounting arrangement should be checked regularly for signs of wear or damage. Ensure that the cut­terblade is not bent or cracked.
A damaged cutterblade that is out of balance will vibrate excessively and may break. DO NOT use an unbalanced cutterblade.
Regularly check that the bolt securing the cutterblade is tightened to the specified torque of 54Nm.
Replace the cutterblade every 2 years of sooner if excessively worn or damaged.
To prevent injury it is wise to seek assistance when turning the mower on its side.
1.25
Lubrication
MOWER MAINTENANCE
1CG480V33C
Cutterblade Removal
Page 26
1.26
Assemble the cutterblade with the turned up edges facing towards the engine. Secure the cutterblade using the bolt (1), spring washer (2), and distance piece (3) and tighten to a torque of 54Nm
A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterblade every 25 mowing hours or more frequently if conditions require. Remove the cutterblade from the mower and clean using a brush and water. Inspect the cutterblade for signs of damage. Sharpen both cutting edges with a flat file to restore performance.
Ensure that the cutterblade is balanced. Use a screw driver with a round shaft to support the cutterblade through its centre hole. Hold the cutterblade horizontal and then release. A balanced cutterblade will remain horizontal.
If the cutterblade is not balanced the heavy end will rotate downwards. Sharpen the heavy end until the cutterblade is correctly balanced.
MOWER
MAINTENANCE
30°-45°
Cutterblade Sharpening
1
2
3
Cutterblade Assembly
Page 27
1.27
Storage
To store the handlebar unscrew the 2 small securing knobs sufficient­ly to allow it to be pivoted forwards to rest against the mower. Take care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being dam­aged through contact with the engine.
Engines stored in excess of 30 days need to be protected with Briggs & Stratton fuel additive or drained of fuel to prevent gum from forming in the fuel system or on essential carburettor parts. To ensure your mower is maintained in good working order it is important that the following procedure is adopted. Refer to the Maintenance section as necessary.
Drain fuel from the engine by operating the engine until it stops.
Disconnect the spark plug lead.
Change the engine oil.
Remove the engine spark plug and pour 15ml of engine oil into the engine cylinder and replace the spark plug. Do not exceed the stated volume of oil as engine damage may occur on re-starting. Do not replace the spark plug lead. Slowly pull the engine start - grip once to crank the engine. This will distribute the oil and help prevent engine corrosion.
Clean grass and debris from the engine cylinder, cylinder head cooling fins, under top cowl, and around and behind exhaust/exhaust guard.
Clean all other areas of the mower and ensure that the grassbag is clean.
Lubricate the mower.
Treat metal parts with a water repellent anti-corrosion product.
Cover the mower with a protective sheet and store it in a dry, ventilat­ed area.
(Electric Start Only)
Charge the battery
Disconnect the battery leads
MOWER MAINTENANCE
Page 28
1.28
MOWER
MAINTENANCE
(491 only) - PREVENT ACCIDENTS: ALWAYS charge the battery in a well ventilated area.
NEVER charge the battery near naked flames or direct heat.
ALWAYS switch off the mains electricity supply before disconnect­ing the charger from the battery.
ALWAYS use the battery charger supplied with the mower.
Battery charging should not be necessary during normal use. The engine operation will automatically charge the battery. If the mower is stored for a long period recharging the battery may be necessary to per­mit electric starting.
Charge the battery only when necessary.
To recharge the battery:
Disconnect the battery lead from the mower lead and then connect the battery lead to the charger.
Connect the charger plug to the mains electricity supply and switch on to charge the battery for a fourteen hour period.
Switch off the mains electricity supply and disconnect the charger plug.
Disconnect the battery lead from the charger and then connect the battery lead to the mower lead.
IMPORTANT - PREVENT DAMAGE: NEVER connect the bat­tery charger to the engine lead as this will cause the charger to be permanently damaged. Chargers damaged in this manner will not be replaced under warranty.
CAUTION - PREVENT ENVIRONMENTAL DAMAGE: The battery and charger have a separate collection mark. This indi­cates that for disposal of the battery and battery charger they must be taken to an authorised disposal site. They must not be disposed of with general waste.
EU Directive 2002/96/EC classifies this product as an electrical or elec­tronic equipment. (a) These products should not be disposed of as unsorted municipal waste. (b) They should be taken to a designated collection point or recycling cen­tre and handled according to national laws in the area. (c) The consumer has a critical role in returning waste electronic/electrical equipment for recycling and disposal. (d) Recycling keeps these products out of the municipal waste stream. (e) The crossed-out bin symbol is a reminder to follow these points. (f) Please contact your local authority or local dealer and ask for further details regarding the correct method of disposal.
14hrs
Battery charging
Page 29
PROBLEM POSSIBLE FAULT REMEDY
Engine will not turn over Engine stop lever released. Operate engine stop lever.
Incorrect oil level. Check oil level.
Obstruction under deck. Remove obstruction.
Battery discharged (491 Only) Charge battery
Engine smokes Excess oil level. Check oil level.
Air cleaner cartridge oil Service air cleaner. soaked or blocked.
Engine runs then stops Fuel starvation. Fill fuel tank.
Fuel cap vent blocked. Clean fuel cap vent.
Engine will not start Engine under load. Raise height of cut.
Fuel starvation. Fill fuel tank.
Engine cold. Set throttle to ‘choke’ position.
Incorrect/contaminated fuel. Drain fuel tank and fill with
correct fuel.
Spark plug lead disconnected. Connect spark plug lead.
Throttle setting incorrect. Set throttle to ‘fast’ position.
Engine brake not released. Operate engine brake lever.
Faulty spark plug. Clean and adjust gap or replace.
Battery discharged (491 Only) Charge battery
Wiring fault. Check wiring.
Engine runs rough Spark plug lead becoming Connect spark plug lead.
disconnected in use.
Faulty spark plug. Clean and adjust gap or replace.
Air cleaner blocked. Service air cleaner.
Incorrect/contaminated fuel. Drain tank and fill with correct fuel.
TROUBLE
1.29
SHOOTING
Page 30
PROBLEM POSSIBLE FAULT REMEDY
Engine vibrates excessively Mounting bolts loose. Tighten bolts
Cutterblade bolt loose. Tighten bolt
Cutterblade out of balance. Balance cutterblade
Bent crankshaft. Consult your dealer
Uneven cut Undulating ground conditions Change direction of travel
Cutterblade worn Sharpen the cutterblade
Cutterblade out of balance Balance the cutterblade
Wheels / roller damaged Inspect and replace as necessary
Discharge chute blocks Grass is wet Mow dry grass
Cut height too low Increase cut height
Grassbag full Empty grassbag
Airflow through the Clean the grassbag grassbag is restricted
Engine speed too slow Set throttle to fast position
Mower is hard to push Cut height too low Increase cut height
Wheels / roller damaged Inspect and replace as necessary
Mower will not self propel Clutch out of adjustment Adjust clutch cable
Drive belt damaged Replace drive belt
Poor grass collection Airflow through the Clean the grassbag
grassbag is restricted
Discharge chute blocked Remove blockage
Wet grass Mow in dryer conditions
Grassbag full Empty grassbag
Engine speed too slow Set throttle to fast position
1.30
TROUBLE SHOOTING
Page 31
1.31
CONFORMITYOFDECLARATION
EC DECLARATION OF CONFORMITY
Manufacturer: HAYTER LIMITED, Address: Spellb rook, Bishop’s Stortford, Herts. CM23 4BU. ENGLAN D
declare that the lawnmower:
Model name:
Type: Model No: Cutting width: Speedofrotationofthe cutting dev ice: Engine manufacturer: Speedofrotationofengine:
Complies with the provisions of Directive: 98/37/EC Essential Health & Safety Requirements Relating to the Design & Construction of Machinery and Safety Components, as amended and the regulations transposed into national law.
Also Directive 89/336/EEC Electromagnetic Compatibility , as amended and the regulations transposed into national law.
Also Directive 2000/14/EC Noise emission in the environment by equipm ent for use outdoo rs and th e regulations transposed in to national law. Procedure app lied for the conformity assessment: ANNEX VI, procedure 1.
Notified Body: Sound Research Laboratories Ltd. Holbrook House, L i t tle Waldingfield, Sudbury, S uffolk. CO10 0TH. ENGLAND Notified body identification No : 1088
Measured s o und power level :
Guaranteed sound power level:
Complies with harmonized standards: EN 292, EN 836 and EN ISO 14982
Signed
S.A Maryniak (Technical Director)
Harrier 48 Autodrive Pedestrian rotary CODE 490D 48 cm
2800 rpm Briggs and Stratton 2800 rpm
95 dB(A)
96 dB(A)
Date: March 2006 Declaration done and technical do cumentation kept at: HAYTER LIMITED Spellbrook, Bishop’s Stortford, Herts. C M23 4 BU ENGLAND
Harrier 48 Autodriv e E/S Pedestrian rotary CODE 491D 48 cm
2800 rpm Briggs and Stratton 2800 rpm
95 dB(A)
96 dB(A)
VIBRATION INFORMATION
The v ibration level at the operator contact positions, measured in accordance with European Standard EN 836
CODE490D - 5ms-2CODE491D - 5ms
-2
Page 32
1 CLIP GRASSBAG FLAP 111-0458 2 2 2 BATTERY 12V HY412009 0 1 3 BATTERY COVER 111-0595 1 1 4 BOLT HANDLEBAR HY226024 2 2 5 CABLE ENGINE BRAKE 111-0700 1 1 6 CABLE GUIDE V/S 410037 4 2 7 CABLE_CLUTCH 111-0701 1 1 8 CAP FOR M8 NUT BLACK HY234051 2 2 9 HANDLEBAR CLAMP PLATE 340028 2 2 10 FLAP_GRASSBAG 111-0196 1 1 11 DEFLECTOR 111-0633 1 1 12 ENGINE XTS50 DUAL A/C B&S 111-0203 1 0
ENGINE XTS50 DUAL A/C E/S B&S 111-0205 0 1 13 ENGINE STOP LEVER 340179 1 1 14 FRAME_GRASSBAG 111-0194-03 1 1 15 GRASSBAG 111-0197 1 1 16 GUIDE_ROPE 305093 1 1 17 HANDLEBAR LOWER 410034W 2 2 18 HANDLEBAR UPPER MOULDED 341029 1 1 19 LEVER CLUTCH 306094W 1 1 20 BOLT COACH M8 x 40 GRADE 8.8 09379 2 2 21 NUT M6 NYLOC ‘T’ TYPE 09438 2 2 22 NUT M8 NYL INSERT T TYPE 09441 2 2 23 PIN PIVOT 340182 2 2 24 RATCHET PLATE HOC 111-0201 1 1 25 FASTENER DRIVE 6.5 341033 1 1 26 ROD DEFLECTOR 560017 1 1 27 SCREW TAPTITE M6*16 09365 4 4 28 FASTENER DRIVE 300144 4 4 29 SCREW TAPTITE UNC 3/8"*1 1/4" 09349 3 3 30 SCREW 06*20 PT PAN FLANGE 09687 2 2 31 SETSCREW M6x55 POSI PAN Z&P 09780 2 2 32 CONTROL THROTTLE 410035 1 1 33 SPRING DEFLECTOR 410030 1 1 34 CABLE VARIATOR 111-0702 1 1 35 KNOB M8 HANDWHEEL 480088 2 2 36 WASHER NYLON 19*11*1.6 09688 2 2 37 SWITCH AND LOOM ASSEMBLY E/S 561003 0 1 38 KEY ELECTRIC START HY6426 0 1 39 PLUG TUBE 7/8*16G 300160 2 2 40 DECAL HAYTER ROYAL WARRANT 410087 1 1 41 DECAL SERIAL NUMBER -------- 1 1 42 DECAL ENGINE HARRIER 48 111-0759 1 1 43 FOAM PAD TOP HY412012 0 2 44 CABLE TIE HY3966 1 1 45 DECAL HEIGHT OF CUT 320006 1 1 46 GRASSBAG ASSEMBLY 111-0764 1 1
INCLUDES 1,10,14,15
47 CABLE GUIDE HY412008 0 2 48 WASHER PLAIN M6*12*1.6 09472 1 1 49 DECAL CAUTION 111-0083 1 1 50 NUT M6 NYLOC P TYPE 09544 1 1 51 GRIP FIX EXT 5/16 04020 2 2
1.32
ITEM NO.
QTY.
490 491
DESCRIPTION
PART NO.
ITEM NOTE
LISTPARTS
MAINFRAMEUPPER
Page 33
1.33
UPPER MAINFRAME
PARTS
LIST
23
13
31
28
25
18
16
48
50
32
35
39
37
17
8
22
9
42
12
3
*
49
51
27
4
8
22
9
26
47
4
21
47
6
34
39
17
46
11
14
1
19
36
30
30
28
5
7
44
35
15
36
23
38
31
21
2
43
41
40
*
33
27
10
20
51
24
45
29
20
1
Page 34
1.34
LIST
ITEM NO.
1 AXLE FRONT WELD ASSY 111-0588 1 1 2 BAR SPRING TENSION 111-0672 1 1 3 BEARING 6001-2RS 411027 2 2 4 BEARING FRONT AXLE 410069 2 2 5 BEARING HOUSING 219102 2 2 6 BELT VARIATOR 536 111-0771 1 1 7 BOLT UNF 2 1/4 09788 1 1 8 BRACKET CABLE HY412003 1 1 9 BRACKET CONN ROD 111-0699 1 1 10 BUSH 340154 1 1 11 BUSH PIVOT 411031 1 1 12 CARRIER BLADE BOSS 410078 1 1 13 CHAIN 40 PITCHES 3/8" INC LINK" 411016 1 1 14 SUPPORT BRACKET REAR PIVOT 111-0426 1 1 15 ROD-CONNECTING 111-0202 1 1 16 COVER DRIVE 411013 1 1 17 CUTTER BLADE 480149 1 1 18 DISTANCE PIECE HY4014 1 1 19 FREEWHEEL 340150 2 2 20 FRICTION DISC 410057W 1 1 21 FRONT_FINS 111-0594 1 1 22 GEARBOX 411002 1 1 23 GRIP FIX EXT 5/16" 04020 1 1 24 HOUSING PIVOT BEARING -
REAR AXLE 410048 2 2 25 HUB CAP 219143 2 2 26 KEY WOODRUFF No 505 1662 1 1 27 KNOB HOC 480134 1 1 28 LEVER HOC 480128 1 1 29 LEVER VARIABLE PULLEY 411014 1 1 30 LOCKNUT 340163 1 1 31 NUT M6 LUG 410076 4 4 32 MAINFRAME 111-0548-08 1 1 33 NUT M6 09544 2 2 34 NUT M8 NYL INSERT T TYPE 09441 1 1 35 NUT UNF 1/2" NYLOC EXT THIN5/16" HY4486 2 2 36 SPACER NYLON 340149 1 1 37 OILITE BUSH ROLLER 340129 2 2 38 PIN ROLL 03997 1 1 39 PIN SELLOC SPRING HY03354 1 1 40 PLATE SECURING 219037 1 1 41 ROLLER FRAME WELD ASSY 111-0585-03 1 1 42 ROLLER SHELL ASSEMBLY 111-0592-03 2 2 43 SCREW TAPTITE M6*12 W/HD 09546 1 1 44 SCREW TAPTITE M6*16 09365 29 29 45 SCREW TAPTITE M6*16 C/SK POZI 09545 4 4 46 SCREW TAPTITE M6*20 W/HD 09575 5 5 47 SCREW TAPTITE M8*25 HEX W/HD 09787 1 1 48 SETSCREW M5*20 ZDH1E020U 2 2
QTY.
490 491
DESCRIPTION
PART NO.
ITEM NOTE
PARTS
MAINFRAMELOWER
Page 35
ITEM NO.
49 SHAFT ROLLER WELDED 111-0589 1 1 50 SHROUD-FREEWHEEL 340168 1 1 51 SPRING COUNTER BALANCE 410050 1 1 52 SPRING TORSION HOC 480132 1 1 53 SPRING VARIATOR HY412004 1 1 54 SPROCKET 10T 411011 1 1 55 SPROCKET 18T 411010 1 1 56 THROWPLATE 111-0218 1 1 57 UNDERDECK CHUTE 111-0131 1 1 58 UNDERDECK COVER 111-0133 1 1 59 PULLEY VARIATOR ASSY 411001 1 1 60 WASHER PLAIN 5/16x1x16G 09270 1 1 61 WASHER PLAIN M5 ZWP1E000U 2 2 62 WASHER SPRING 3/8" SC 09273 1 1 63 WASHER STARLOCK 5/16" 0201086 2 2 64 WHEEL WITH BEARINGS HY5218 2 2 65 NUT M6 NYLOC ZNN1J000U 1 1 66 CLUTCH LEVER 411020 1 1 67 SPRING 411021 1 1 68 PULLEY 411019 1 1 69 PIN 411023 1 1 70 BELT VARIATOR 450 411025 1 1 71 CHARGER NOT ILLUSTRATED 412010 0 1
QTY.
490 491
DESCRIPTION
PART NO.
ITEM NOTE
LOWER MAINFRAME
PARTS
LIST
1.35
Page 36
1.36
LOWER MAINFRAME
PARTS
LIST
32
67
57
69
68
65
66
22
Detail A
31
44
44
**
**
44
26
12
35
25
64
4
1
33
61
15
4
64
**
21
**
63
35
46
44
44
44
25
44
31
56
44
44
46
46
11
29
60
47
63
6
33
61
9
44
34
53
A
70
59
*
48
44
46
58
44
20
14
45
5
44
8
44
40
10
44
51
24
44
2
37
42
49
52
44
3
*
3
44
24
19
50
36
19
27
28
41
5
45
38
55
39
13
45
23
54
16
43
30
42
37
17
18
62
7
Page 37
NOTES
1.37
Page 38
1.38
NOTES
Page 39
1.39
NOTES
Page 40
CUSTOMER INFORMATION /NOTES
1.40
Serial No:
Engine Type:-
12F8022055B1 (490D) Engine:- Briggs & Stratton XTS50
Engine Type:- 12F8072054B1 (491D) Engine:- Briggs & Stratton XTS50
Date of Sale:-
Your Local Dealer:-
Notes:-
Loading...