Do not operate this equipment unless you
have read and understood the contents of
this manual! Failure to follow the
instructions contained in this manual may
result in serious injury or death. This
manual contains important safety
information concerning the maintenance,
use, and operation of this product. If
you’re unable to understand the contents
of this manual, please bring it to the
attention of your supervisor. Keep this
manual in a safe location for future
reference.
No opere este equipo al menos que haya
leído y comprendido el contenido de este
manual! Cualquier falla en el seguimiento
de las instrucciones contenidas en este
manual puede resultar en un serio lesión
o muerte. Este manual contiene
importante información sobre seguridad
concerniente al mantenimiento, uso y
operación de este producto. Si usted no
puede entender el contenido de este
manual por favor pregunte a su
supervisor. Almacenar este manual en
una localización segura para la referencia
futura.
Ne pas utiliser cet équipement sans avoir
lu et compris le contenu de ce manuel !
Le non-respect des instructions
contenues dans ce manuel peut entraîner
de graves blessures ou la mort. Ce
manuel contient des informations
importantes concernant l'entretien,
l'utilisation et le fonctionnement de ce
produit. Si vous ne comprenez pas le
contenu de ce manuel, veuillez le signaler
à votre supérieur. Conservez ce manuel
dans un endroit sûr pour pouvoir vous y
référer plus tard.
Record the model number, serial number (specification label
located on the back of the unit), voltage, and purchase date of
the unit in the spaces below. Please have this information
available when calling Hatco for service assistance.
Model No. ____________________________________
Serial No. ____________________________________
Voltage ______________________________________
Date of Purchase ______________________________
Register your unit!
Completing online warranty registration will prevent delay in
obtaining warranty coverage. Access the Hatco website at
www.hatcocorp.com, select the Parts & Service pull-down
Authorized Parts Distributors............................Back Cover
Business8:00 AM to 5:00 PM
Hours:Central Standard Time (C.S.T.)
(Summer Hours: June to September –
8:00
AM to 5:00 PM C.S.T. Monday – Thursday
8:00
AM to 2:30 PM C.S.T. Friday)
Telephone: (800) 558-0607; (414) 671-6350
E-mail:partsandservice@hatcocorp.com
Fax:(800) 690-2966 (Parts and Service)
(414) 671-3976 (International)
24 Hour 7 Day Parts and Service Assistance
available in the United States and Canada by
calling (800) 558-0607.
Additional information can be found by visiting our web site at
www.hatcocorp.com.
INTRODUCTION
The Hatco Toast-Rite and Toast King Electric Conveyor Toasters
are specially designed to speed the toasting operation. Products
pass through a heating chamber for rapid and thorough
toasting. Dryness, moisture, sugar content, and thickness of
bread product affect the ability to achieve the perfect toasted
product. Conveyor speed, not temperature, determines the
toasting color.
Hatco toasters are quality built to meet the demands of
foodservice operations and provide years of trouble-free
performance. The metal-sheathed tubular heating elements are
guaranteed against breakage and burnout for two years. (If
failure of one element should occur, your Hatco toaster will
continue to operate – the production may be slightly lower.)
Hatco Electric Conveyor Toasters are products of extensive
research and field testing. The materials used were selected
for maximum durability, attractive appearance, and optimum
performance. Every unit is inspected and tested thoroughly prior
to shipment.
This manual provides the installation, safety, and operating
instructions for Hatco Electric Conveyor Toasters. Hatco
recommends all installation, operating, and safety instructions
appearing in this manual be read prior to installation or
operation of a unit.
Safety information that appears in this manual is identified by
the following signal word panels:
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to
personal injury.
2
Form No. TRTKM-0812
Page 3
IMPORTANT SAFETY INSTRUCTIONS
WARNING
CAUTION
NOTICE
WARNING
Read the following important safety information before using this equipment to avoid serious
injury or death and to avoid damage to equipment or property.
ELECTRIC SHOCK HAZARD:
• Plug unit into a properly grounded electrical receptacle
of correct voltage, size, and plug configuration. If plug
and receptacle do not match, contact a qualified
electrician to determine and install proper voltage and
size electrical receptacle.
• Turn OFF power switch, unplug power cord, and allow
unit to cool before performing cleaning, adjustments,
maintenance, or attempting to clear a jam.
• DO NOT submerge or saturate with water. Unit is not
waterproof. Do not operate if unit has been submerged
or saturated with water.
• Unit is not weatherproof. Locate unit indoors where the
ambient air temperature is a minimum of 70°F (21°C).
• Do not pull unit by power cord.
• Discontinue use if power cord is frayed or worn.
• Do not attempt to repair or replace a damaged power
cord. Cord must be replaced by Hatco, an Authorized
Hatco Service Agent, or a person with similar
qualifications.
• Do not steam clean or use excessive water on unit.
• This unit is not “jet-proof” construction. Do not use jetclean spray to clean unit.
• Do not clean unit when it is energized or hot.
• Do not allow liquids to spill into unit.
• This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
This unit has no “user-serviceable” parts. If service is
required on this unit, contact an Authorized Hatco Service
Agent or contact the Hatco Service Department at
800-558-0607 or 414-671-6350; fax 800-690-2966; or
International fax 414-671-3976.
BURN HAZARD:
• Some exterior surfaces on unit will get hot. Use caution
when touching these areas.
• Do not remove toast collector pan or baskets for
cleaning until toaster is cool.
Locate unit at proper counter height in an area that is
convenient for use. Location should be level to prevent unit
or its contents from falling accidentally and strong enough
to support weight of unit and contents.
Products thicker than 1-1/4" (32 mm) will cause conveyor
system to jam, which could ignite product inside toaster.
Misalignment of toasting baskets will cause conveyor to
jam. Hold down bars should be facing out and lying flat on
baskets. Incorrectly positioned bars will cause conveyor
to stop.
Always operate toaster with toast collector pan installed.
Toasting of coated or buttered products such as garlic
bread, cheese sandwiches, and sweet rolls is NOT
recommended. Residue will reduce toaster performance
and could ignite inside toaster. Using toaster with food
products listed above will void unit warranty.
FIRE HAZARD:
• Locate unit a minimum of 1″ (25 mm) from combustible
walls and materials. If safe distances are not
maintained, combustion or discoloration could occur.
• Do not locate toaster under shelving or closer than 12"
(305 mm) from the ceiling.
• Do not place anything on top of toaster. Do not place
toaster near or underneath curtains or other
combustible materials. Items near or on top of toaster
could catch fire causing injury and/or damage to
toaster.
EXPLOSION HAZARD: Do not store or use gasoline or
other flammable vapors or liquids in the vicinity of this or
any other appliance.
In case of fire, disconnect toaster from power source
immediately. This allows unit to cool, making it easier and
safer to put out the fire.
Make sure all operators have been instructed on the safe
and proper use of the unit.
This unit is not intended for use by children or persons with
reduced physical, sensory, or mental capabilities. Ensure
proper supervision of children and keep them away from unit.
Form No. TRTKM-0812
Do not locate unit in an area subject to excessive
temperatures or grease from grills, fryers, etc. Excessive
temperatures could cause damage to the unit.
Do not locate toaster in an area that restricts air flow
around front or rear of unit. Do not locate toaster in direct
discharge path of air conditioning vent or makeup air vent.
Do not lay unit on the side with control panel or manual
advance knob. Damage to unit could occur.
Use non-abrasive cleaners and cloths only. Abrasive
cleaners and cloths could scratch finish of unit, marring its
appearance and making it susceptible to soil accumulation.
This unit is intended for commercial use only—NOT for
household use.
3
Page 4
MODEL DESCRIPTION
Toasting
Basket
Toast
Collector
Pan
Manual
Advance
Knob
Speed
Control
Selector
Switch
Manual
Advance
Knob
Toasting
Basket
Toast
Collector
Pan
Speed
Control
Selector
Switch
T R H - X X X B
TRH = Toast-Rite
TK = Toast King
Model Number
B = Buns model
(Toasts one side)
All Models
All Toast-Rite®and Toast King®Electric Conveyor Toasters are
fast, dependable, and versatile. Multiple heating elements
assure continuous toasting, and are guaranteed against
burnout and breakage for two years.
Every unit includes a toast collector pan, heated toast storage
area, power saving thermostat, speed control, manual advance,
and factory attached 4' (1219 mm) cord and plug.
Toast-Rite Models
Toast-Rite models are used for constant, medium-to-high
volume applications. They are capable of toasting up to 600
slices of bread per hour. The toasting baskets are two-slices
wide.
TRH-50 Model
The TRH-50 model toasts up to 8 bread or bun slices per
minute (600 per hour).
TRH-60 Model
The TRH-60 model toasts up to 10 bread or bun slices per
minute (600 per hour).
Toast King Models
Toast King models are for constant, high volume applications.
They use fast heat-up, three-basket access for fast loading, and
a vented top to toast up to 700–1500 slices of bread per hour.
TK-72 Model
The TK-72 model toasts up to 12 bread or bun slices per minute
(720 per hour) and features toasting baskets two-slices wide.
TK-100 Model
The TK-100 model toasts up to 16 bread or bun slices per
minute (1000 per hour) and features toasting baskets threeslices wide.
TK-135B Model
The TK-135B model is a buns only toaster that toasts up to 22
bun slices per minute (1350 per hour) and features toasting
baskets three-slices wide.
TK-155B Model
The TK-155B model is a 3-part hamburger bun toaster that
toasts up to 25 3-part bun slices per minute (1550 per hour) and
features toasting baskets three-slices wide. The outside buns
are toasted on one side, the middle bun is toasted on both sides.
TRH Series
MODEL DESIGNATION
TK-100 Model
4
Form No. TRTKM-0812
Page 5
SPECIFICATIONS
WARNING
NEMA 6-20P
CEE 7/7 Schuko
NEMA 5-30P
BS 1363
NEMA 6-30P
Plug Configurations
Units are supplied from the factory with an electrical cord and
plug installed. Plugs are supplied according to the applications.
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of correct voltage, size, and
plug configuration. If plug and receptacle do not match,
contact a qualified electrician to determine and install
proper voltage and size electrical receptacle.
NOTE: Specification label located on the back of the unit. See
label for serial number and verification of unit electrical
information.
Connecting Supply Wires
If local codes require Greenfield or conduit hook-up, consult a
licensed electrical contractor to perform supply wire connection.
Access to the unit wiring is through the rear lower access panel.
To connect supply wires to the toaster:
1. Remove the screws securing the side panels, and remove
the side panels.
2. Remove the screws securing the rear lower access panel,
and remove the panel.
3. Insert the Greenfield or conduit through the opening in the
rear access panel and attach to the power supply bracket.
Connect the wires.
4. Attach the ground wire to the power supply bracket at the
threaded hole marked “G”.
5. Reinstall access panel and side panels.
Plug Configurations
NOTE: Receptacles are not supplied by Hatco, but are
220–230 CE504038–441418.4–19.2No Cap73 lbs. (33 kg)
230–240 CE503708–403816.1–16.8No Cap73 lbs. (33 kg)
24050403816.8No Cap73 lbs. (33 kg)
TK-75
TK-10020860503824.0NEMA 6-30P88 lbs. (40 kg)
TK-105
TK-135B20860433820.9NEMA 6-30P88 lbs. (40 kg)
TK-155B20860501824.1NEMA 6-30P88 lbs. (40 kg)
220–230 CE505238–572523.8–24.9No Cap73 lbs. (33 kg)
230–240 CE504811–523821.0–21.8No Cap73 lbs. (33 kg)
24060503821.0NEMA 6-30P88 lbs. (40 kg)
20050465723.3NEMA 6-30P88 lbs. (40 kg)
22060503822.9No Cap88 lbs. (40 kg)
22050503822.9No Cap88 lbs. (40 kg)
220–230 CE505038–550722.9–23.9No Cap88 lbs. (40 kg)
230–240 CE504626–503820.1–21.0No Cap88 lbs. (40 kg)
24050503821.0No Cap88 lbs. (40 kg)
22050743833.8No Cord88 lbs. (40 kg)
24050567823.7No Cap88 lbs. (40 kg)
220–230 CE507438–812933.8–35.3No Cord88 lbs. (40 kg)
230–240 CE506830–743830.0–31.0No Cord88 lbs. (40 kg)
24060433818.1NEMA 6-20P*88 lbs. (40 kg)
22060433819.7No Cap88 lbs. (40 kg)
22050433819.7No Cap88 lbs. (40 kg)
220–230 CE504338–474119.7–20.6No Cap88 lbs. (40 kg)
230–240 CE503984–433817.3–18.1No Cap88 lbs. (40 kg)
24050433818.1No Cap88 lbs. (40 kg)
24060501820.9NEMA 6-30P88 lbs. (40 kg)
22060501822.8No Cap88 lbs. (40 kg)
22050501822.8No Cap88 lbs. (40 kg)
24050501820.9No Cap88 lbs. (40 kg)
The shaded areas contain electrical information for International models only.
* NEMA 6-30P for Canada.
NOTE: Units with “No Cap” plug configuration come with a power cord only (no plug).
Form No. TRTKM-0812
7
Page 8
SPECIFICATIONS
B
A
E
Front View
Side View
D
C
Dimensions—TRH Models
Width
Model
TRH-5018-1/4″
TRH-6018-1/4″
TRH-65E18-1/4″
(A)
(464 mm)
(464 mm)
(464 mm)
Depth
(B)
27-1/2″
(699 mm)
27-1/2″
(699 mm)
27-1/2″
(699 mm)
Height
(C)
16-1/2″
(418 mm)
16-1/2″
(418 mm)
16-1/2″
(418 mm)
Footprint
Width (D)
9-7/8″
(252 mm)
9-7/8″
(252 mm)
9-7/8″
(252 mm)
Footprint
Depth (E)
20-1/4″
(516 mm)
20-1/4″
(516 mm)
20-1/4″
(516 mm)
8
Form No. TRTKM-0812
Page 9
Dimensions—TK Models
A
C
B
E
Front View
Side View
D
SPECIFICATIONS
Width
Model
TK-7218-1/4″
TK-7518-1/4″
TK-10022-3/4″
TK-10522-3/4″
TK-135B22-3/4″
TK-155B22-3/4″
(A)
(464 mm)
(464 mm)
(578 mm)
(578 mm)
(578 mm)
(578 mm)
Depth
(B)
17-5/8″
(448 mm)
17-5/8″
(448 mm)
17-5/8″
(448 mm)
17-5/8″
(448 mm)
17-5/8″
(448 mm)
17-5/8″
(448 mm)
Height
(C)
33″
(838 mm)
33″
(838 mm)
33″
(838 mm)
33″
(838 mm)
33″
(838 mm)
33″
(838 mm)
Footprint
Width (D)
13-3/4″
(349 mm)
13-3/4″
(349 mm)
18-1/4″
(464 mm)
18-1/4″
(464 mm)
18-1/4″
(464 mm)
18-1/4″
(464 mm)
Footprint
Depth (E)
11-1/4″
(287 mm)
11-1/4″
(287 mm)
11-1/4″
(287 mm)
11-1/4″
(287 mm)
11-1/4″
(287 mm)
11-1/4″
(287 mm)
Form No. TRTKM-0812
9
Page 10
INSTALLATION
Toast Collector
Pan
Speed
Control
Selector
Switch
Manual
Advance
Knob
WARNING
NOTICE
General
Hatco Toast-Rite®and Toast King®Electric Conveyor Toasters
are shipped with all components pre-assembled. Care should be
taken when unpacking the shipping carton to avoid damage to the
unit and the components enclosed.
ELECTRIC SHOCK HAZARD: Unit is not weatherproof.
Locate unit indoors where ambient air temperature is a
minimum of 70°F (21°C).
EXPLOSION HAZARD: Do not store or use gasoline or
other flammable vapors or liquids in the vicinity of this or
any other appliance.
FIRE HAZARD:
• Locate unit a minimum of 1″ (25 mm) from combustible
walls and materials. If safe distances are not
maintained, combustion or discoloration could occur.
• Do not place anything on top of toaster. Do not place
toaster near or underneath curtains or other combustible
materials. Items near or on top of toaster could catch fire
causing injury and/or damage to toaster.
1. Remove the unit from the carton.
NOTE: To prevent delay in obtaining warranty coverage,
complete online warranty registration. See the
IMPORTANT OWNER INFORMATION section for
details.
2. Remove tape and protective packaging from all surfaces of
the unit.
3. Place the unit in the desired location.
4. Install the toast collector pan.
5. If the unit does not have a plug installed on the power cord,
contact a qualified electrician to determine and install the
proper voltage and size electrical plug. See the
SPECIFICATIONS section for details.
NOTE: Hatco tests each toaster with bread product prior to
shipping.
TK-100 Model
Do not locate unit in an area subject to excessive
temperatures or grease from grills, fryers, etc. Excessive
temperatures could cause damage to the unit.
Do not locate toaster in an area that restricts air flow
around front or rear of unit. Do not locate toaster in direct
discharge path of air conditioning vent or makeup air vent.
• Locate the unit in an area where the ambient air
temperature is constant and a minimum of 70°F (21°C).
Avoid areas that may be subject to active air movements
or currents (i.e., near exhaust fans/hoods and air
conditioning ducts).
• Make sure the unit is at the proper counter height in an
area convenient for use.
• Make sure the countertop is level and strong enough to
support the weight of the unit and food product.
• Make sure all the feet on the bottom of the unit are
positioned securely on the countertop.
10
Form No. TRTKM-0812
Page 11
General
WARNING
CAUTION
CAUTION
Selector
Switch
Speed
Control
Manual
Advance
Knob
Thermostat
Adjustment
Screw
Hatco Toasters are designed for ease of operation. Perform the
following procedure to operate the toaster.
Read all safety messages in the IMPORTANT SAFETY
INFORMATION section before operating this equipment.
1. Plug the unit into a properly grounded electrical receptacle
of the correct voltage, size, and plug configuration. See the
SPECIFICATIONS section for details.
2. Turn the Selector Switch from the OFF (O) position to the
TOAST or BUNS position.
NOTE: When toasting buns or bagels, place cut side facing out
and set the Selector Switch to the BUNS position.
3. Turn the Speed Control counter-clockwise to the
lightest/fastest position while the unit heats up.
NOTE: Allow approximately 15 minutes for a warm-up period.
Always operate toaster with toast collector pan installed.
BURN HAZARD: Some exterior surfaces on unit will get hot.
Use caution when touching these areas.
4. After warm-up period, set the Speed Control to the desired
toast darkness setting. The “1” setting on the Speed Control
knobs represents the lightest toast setting and the “7” setting
represents the darkest.
NOTE: To toast moist products such as English muffins, rye
bread, or whole wheat, slow the conveyor by turning the
Speed Control knob to a DARKER setting (clockwise).
Toasting of coated or buttered products such as garlic
bread, cheese sandwiches, and sweet rolls is NOT
recommended. Residue will reduce toaster performance
and could ignite inside toaster. Using toaster with food
products listed above will void unit warranty.
Products thicker than 1-1/4" (32 mm) will cause conveyor
system to jam, which could ignite product inside toaster.
OPERATION
Control Panel (TK-100 shown)
Manual Advance
The manual advance knob is located on the right side panel of
the toaster. This knob permits manual advancement of the
toasting baskets and allows rapid discharge of toast.
Thermostat Adjustment
The thermostat adjustment screw is located on the control
panel. The thermostat controls the toasting chamber
temperature and is preset at the factory.
If adjustment is needed, use the following procedure.
1. Turn the Selector Switch to the TOAST or BUNS position
and allow approximately 15 minutes for a warm-up period.
• The thermostat should be adjusted when the toaster is at
the operation temperature.
2. Turn the adjustment screw using a small screwdriver.
• Turn the screw clockwise to increase temperature or
counterclockwise to decrease the temperature.
NOTE: Do not turn the screw more than 1/8 turn at a time. Allow
at least five minutes for temperature to stabilize.
Form No. TRTKM-0812
11
Page 12
MAINTENANCE
WARNING
WARNING
CAUTION
CAUTION
Spring-Loaded
Chain
Toasting
Basket
Hold Down
Bar
General
Hatco Electric Conveyor Toasters are designed for maximum
durability and performance, with minimum maintenance.
NOTE: The conveyor chain gear motor is permanently
lubricated and requires no maintenance.
ELECTRIC SHOCK HAZARD:
• Turn OFF power switch, unplug power cord, and allow
unit to cool before performing cleaning, adjustments,
maintenance, or attempting to clear a jam.
• DO NOT submerge or saturate with water. Unit is not
waterproof. Do not operate if unit has been submerged
or saturated with water.
• Do not steam clean or use excessive water on unit.
• This unit is not “jet-proof” construction. Do not use jetclean spray to clean this unit.
• Do not clean unit when it is energized or hot.
This unit has no “user-serviceable” parts. If service is
required on this unit, contact an Authorized Hatco Service
Agent or contact the Hatco Service Department at
800-558-0607 or 414-671-6350; fax 800-690-2966; or
International fax 414-671-3976.
Daily Cleaning
To preserve the finish of the toaster, it is recommended that the
metal surfaces be wiped daily with a non-abrasive, damp cloth.
Submerging or saturating unit with water will damage the
unit and void unit warranty.
Do not remove toast collector pan or baskets for cleaning
until toaster is cool.
1. Turn the Selector Switch to the OFF (O) position, unplug
power cord, and allow the unit to cool.
2. Remove and empty the toast collector pan.
3. Wash the toast collector pan with warm water and a mild
detergent. Rinse with water.
4. Allow the toast collector pan to air dry before placing back
into the toaster.
5. Wipe the exterior surface of the toaster with a damp cloth.
NOTICE: Use non-abrasive cleaners and cloths only.
6. Wipe dry the entire unit using a dry, non-abrasive cloth.
Cleaning the Toasting Baskets
The toasting baskets need to be removed from the toaster
periodically in order to be cleaned properly.
1. Use the manual advance knob on the right side of the unit
to advance the baskets without energizing the unit.
2. Remove the baskets by pushing the spring-loaded chain
away from the basket while pulling the basket away from
the chain and outward.
• The chain link pins must be pulled out of the toasting
basket holes on the top of each side of the baskets.
Removing Toasting Baskets
NOTE: Do not detach the hold down bars when cleaning
toasting baskets.
3. Wipe clean with a soft, damp cloth or soak the baskets in a
mild solution of soap and water.
4. Re-install a basket by aligning a pin on each chain with the
holes in each side of the toasting basket. The pin on the
right-hand chain must be exactly opposite the pin on the lefthand chain.
5. To attach the remaining baskets, advance the conveyor and
repeat the previous step. Each basket must be hung
immediately below the preceding basket for all baskets to
fit properly.
Misalignment of toasting baskets will cause conveyor to
jam. Hold down bars should be facing out and lying flat on
baskets. Incorrectly positioned bars will cause conveyor to
stop.
12
Form No. TRTKM-0812
Page 13
TROUBLESHOOTING GUIDE
WARNING
WARNING
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
ELECTRIC SHOCK HAZARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing cleaning, adjustments, maintenance, or
attempting to clear a jam.
SymptomProbable CauseCorrective Action
Toast too light.Speed Control set on a light setting.Turn Speed Control to a darker setting.
Thermostat is set to low.Refer to “Thermostat Adjustment” in the
Supply voltage to unit is low.Verify the supply voltage to the toaster matches
Heating element defective.Visually check the heating element inside the
Toast too dark.Speed Control set on a dark setting.Turn Speed Control to a lighter setting.
Thermostat is set to high.Refer to “Thermostat Adjustment” in the
Supply voltage to unit is high.Verify the supply voltage to the toaster matches
Unit takes too long to toast.The first few batches can take longer because
the toaster needs time to heat up when initially
turned on.
OPERATION section for information.
the unit specifications.
toaster with the unit turned on. The heating
elements should glow red. If the element does not
glow, Contact Authorized Service Agent or Hatco
for assistance.
OPERATION section for information.
the unit specifications.
Wait until the toaster is at full operation
temperature before inserting bread.
Unit toasts on one side only.
(TK-135B and TK-155B models are
designed to toast one side of
buns/bagels only.)
Toaster trips the circuit breaker or
GFCI.
Supply voltage to unit is low.Verify the supply voltage to the toaster matches
The selector switch is in the BUNS position.Move the selector switch to the BREAD position.
Heating element defective.Visually check the heating element inside the
Circuit breaker is not sized properly for the
toaster.
Wiring fault inside toaster.Contact Authorized Service Agent or Hatco for
the unit specifications.
toaster with the unit turned on. The heating
elements should glow red. If the element does not
glow, Contact Authorized Service Agent or Hatco
for assistance.
Check circuit breaker for proper sizing.
assistance.
Form No. TRTKM-0812
13
Page 14
OPTIONS AND ACCESSORIES
Lengthen
Shorten
Adjustable Tip
NOTICE
4" (102 mm) Adjustable Legs
4” (102 mm) adjustable legs are available as accessories for all
models. Use the following procedure to install the legs.
Do not lay unit on the side with control panel or manual
advance knob. Damage to unit could occur.
1. Carefully place unit on its side.
2. Thread the 4" (102 mm) adjustable legs into the existing leg
holes on the bottom of the unit.
3. After all legs are secure, return the unit to the upright
position.
4. Level the unit by turning the
adjustable tip on each leg. Use a
5/8″ (16mm) open-end wrench to
make leveling adjustments.
Baskets for Jumbo Buns
Baskets for Jumbo Buns are available as accessories for TK100, TK-135B, and TK-155B Models only. These baskets
accommodate large buns up to 5-1/2" (140 mm) in diameter.
Security Control Cover
An optional security control cover is available for all models (not
for field retrofit). A security control cover includes the control
cover, bracket, and mounting hardware. TK models come with
a fuse cover.
Receptacles
Receptacles are available as accessories for units using
NEMA 5-20P, NEMA 5-30P, or NEMA 6-30P plugs.
Mounting Brackets
Mounting brackets are available as accessories to securely and
permanently mount a toaster. The brackets are installed in the
leg mounting holes. Fasteners not supplied.
14
Form No. TRTKM-0812
Page 15
LIMITED WARRANTY
1. PRODUCT WARRANTY
Hatco warrants the products that it manufactures (the
“Products”) to be free from defects in materials and
workmanship, under normal use and service, for a period of
one (1) year from the date of purchase when installed and
maintained in accordance with Hatco’s written instructions or
18 months from the date of shipment from Hatco. Buyer must
establish the Product’s purchase date by registering the Product
with Hatco or by other means satisfactory to Hatco in its sole
discretion.
Hatco warrants the following Product components to be free
from defects in materials and workmanship from the date of
purchase (subject to the foregoing conditions) for the period(s)
of time and on the conditions listed below:
a) One (1) Year Parts and Labor PLUS One (1) Additional
Year Parts-Only Warranty:
Conveyor Toaster Elements (metal sheathed)
Drawer Warmer Elements (metal sheathed)
Drawer Warmer Drawer Rollers and Slides
Strip Heater Elements (metal sheathed)
Display Warmer Elements (metal sheathed air heating)
Holding Cabinet Elements (metal sheathed air heating)
Heated Well Elements — HWB Series (metal sheathed)
b) One (1) Year Parts and Labor PLUS Four (4) Years
Parts-Only Warranty:
3CS and FR Tanks
c) One (1) Year Parts and Labor PLUS Nine (9) Years
Parts-Only Warranty on:
Electric Booster Heater Tanks
Gas Booster Heater Tanks
d) Ninety (90) Day Parts-Only Warranty:
Replacement Parts
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN
LIEU OF ANY OTHER WARRANTY, EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR PATENT OR OTHER
INTELLECTUAL PROPERTY RIGHT INFRINGEMENT.
Without limiting the generality of the foregoing, SUCH
WARRANTIES DO NOT COVER: Coated incandescent light
bulbs, fluorescent lights, heat lamp bulbs, coated halogen light
bulbs, halogen heat lamp bulbs, xenon light bulbs, LED light
tubes, glass components, and fuses; Product failure in booster
tank, fin tube heat exchanger, or other water heating equipment
caused by liming, sediment buildup, chemical attack, or
freezing; or Product misuse, tampering or misapplication,
improper installation, or application of improper voltage.
2. LIMITATION OF REMEDIES AND DAMAGES
Hatco’s liability and Buyer’s exclusive remedy hereunder will be
limited solely, at Hatco’s option, to repair or replacement using
new or refurbished parts or Product by Hatco or a Hatcoauthorized service agency (other than where Buyer is located
outside of the United States, Canada, United Kingdom, or
Australia, in which case Hatco’s liability and Buyer’s exclusive
remedy hereunder will be limited solely to replacement of part
under warranty) with respect to any claim made within the
applicable warranty period referred to above. Hatco reserves
the right to accept or reject any such claim in whole or in part.
In the context of this Limited Warranty, “refurbished” means a
part or Product that has been returned to its original
specifications by Hatco or a Hatco-authorized service agency.
Hatco will not accept the return of any Product without prior
written approval from Hatco, and all such approved returns shall
be made at Buyer’s sole expense. HATCO WILL NOT BE
LIABLE, UNDER ANY CIRCUMSTANCES, FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING
BUT NOT LIMITED TO LABOR COSTS OR LOST PROFITS
RESULTING FROM THE USE OF OR INABILITY TO USE THE
PRODUCTS OR FROM THE PRODUCTS BEING
INCORPORATED IN OR BECOMING A COMPONENT OF
ANY OTHER PRODUCT OR GOODS.
Form No. TRTKM-0812
15
Page 16
HATCO AUTHORIZED PARTS DISTRIBUTORS
HATCO CORPORATION
P.O. Box 340500
Milwaukee, WI 53234-0500 U.S.A.
(800) 558-0607 (414) 671-6350
Parts and Service Fax (800) 690-2966
International Fax (414) 671-3976
partsandservice@hatcocorp.com
www.hatcocorp.com
ALABAMA
Jones McLeod Appl. Svc.
Birmingham205-251-0159
ARIZONA
Service Solutions Group
Phoenix602-234-2443
Byassee Equipment Co.
Phoenix602-252-0402
CALIFORNIA
Industrial Electric
Commercial Parts & Service, Inc.
Huntington Beach714-379-7100
Chapman Appl. Service
San Diego619-298-7106
P & D Appliance
Commercial Parts & Service, Inc.
S. San Francisco650-635-1900