®
Toast-King
Conveyor Toasters
TK Series
IMPORTANT NOTE:
Locate the Specification Label on unit to determine
exact Model Name and electrical specifications. This
information is needed to identify the correct
replacement parts. See exploded view illustration(s)
for Specification Label location.
Use of replacement parts other than those supplied
by Hatco Corporation may result in damage to unit
or injury to personnel and will void all warranties.
Model Name Page
TK-72 and TK-75E .......3
TK-100 and
TK-105E .....................4
Model Name Page
TK-90B .........................5
TK-135B and
TK-155B .....................6
ServiceInformation Page
Conveyor Shaft
Assembly Guide .........7
Replacement Parts List
© 2014 Hatco Corporation
TK-72 and TK-75E Models
Week Four
96 25 06 14 0 4
Year 2014
NOTE: The last four digits in a ten digit numerical serial
number are the manufacturing date code:
Item Description Part No. Qty.
1 Side Cover, Left 04.05.003.00 1
2 Basket Guide 04.05.101.00 1
3 Conveyor Chain R05.03.007A.00 2
4 Hold Down Bar 04.05.143.00 10
5 Conveyor Basket 04.05.142.00 10
6 Buss Bar, Flat 04.05.062.00 10
7 Toast Collector Pan 04.05.050.00 1
8 Label, Control Plate 07.01.217.00 1
9 Control Knob 05.30.020.00 2
10 Selector Switch
208 and 240 V R02.19.082.00 1
200, 220, 230, and 240 V 02.19.196.00 1
11 Rheostat
208 and 240 V R02.13.111.00 1
200, 220, 230, and 240 V R02.13.125.00 1
12 Thermostat 02.16.011.00 1
13 Drive Sprocket 05.09.031.00 1
14 Terminal Block R02.15.046.00 1
15 Spring Pin, 1/8″ x 3/4″ 05.08.006.00 5
16 Conveyor Chain Sprocket 05.09.020.00 6
Relay, Element 02.01.147.00 1
17
18 Shaft, Lower Front 05.07.009.00 1
19 Ball Bearing Hub 05.02.011.00 6
20 Tension Spring 05.08.001.00 1
21 Adjustable Bearing Retainer 04.30.022.00 1
22 Side Cover, Right 04.05.002.00 1
23 Spring Pin, 1/8″ x 7/16″ 05.08.007.00 1
24 Shaft, Upper Rear 05.07.008.00 1
25 Bearing Spacer 05.11.022.00 3
26 Upper Bearing Retainer 04.30.020.00 2
27 Buss Bar, Hat Shaped
28 Buss Bar, “U” Shaped
04.05.063.00
04.05.060.00
* Includes items 15, 19, 37–39, and 42–46.
† Not shown on page 2.
10
Item Description Part No. Qty.
29
Heating Elements
208 V, 200 W (104 V) R02.09.002.00 20
240 V, 200 W (120 V) R02.09.001.00 20
200 V, 200 W (104 V) R02.09.002.00 20
220 V, 200 W (110 V)
230 V, 240 V, 200 W (115 V)
30
Fan Blade, Motor
31
Gear Motor
208 V (60 Hz)
240 V (60 Hz)
200 V (50 Hz)
220 V (60 Hz)
220, 230, and 240 V (50 Hz)
Fuse, 1 A (2-pack)
32
Power Cord
33
250 V, 20 A, NEMA 6-20P Plug
250 V, 25 A, No Plug
34
Cord Grip
208, 240 V
200 V
220, 230, and 240 V
Fuse Holder w/Fuse
35
36
Shaft, Lower Rear, Threaded 05.07.007.00 1
37
Lower Bearing Retainer 04.30.021.00 2
38
Washer, Flat 05.04.369.00 1
39
Compression Spring 05.08.005.00 1
40
Manual Advance Knob 05.30.001.00 1
41
Drive Chain 05.03.038.00 1
42
Driven Sprocket 05.09.020.00 1
43
Washer, Thrust --- ---
Bearing
44
Pin, Spring
45
Pin, Cotter
6
46
Bearing Assembly *
47
48
Capacitor, Power Cord
(TK-72 and TK-75E CE Units) †
Diode
49
50
51
52
53
54
†
Conveyor Chain Connector Link
Motor Relay (TK-75E CE Units)
Capacitor, Motor Relay
(TK-75E CE Units)
Motor Resistor (TK-75E CE Units)
Terminal Block, Power Cord
(TK-72 and TK-75E CE Units) †
† --- ---
†
R02.09.200E.00
R02.09.207E.00
02.12.088.01
R02.12.020.00
R02.12.021.00
R02.12.020.00
R02.12.021.00
R02.12.025.00
R02.03.005A.02
02.18.016.00
02.18.103.00
02.20.209.00
02.20.209.00
R02.20.259.00
R02.19.028.00
02.13.307.00 1
02.40.002.00
05.03.009A.00
†
†
02.01.180.00
02.13.303.00
02.13.325.00
†
R02.15.035.00
20
20
1
1
1
1
1
1
1
1
1
1
1
1
2
--- ---
--- ---
--- ---
1
2
1
1
1
1
The shaded areas contain part information for International models only.
NOTE: Quantities shown as a range (example = “1–4”) are dependent upon the model.
Form No. TKRP-1214
Wiring Diagram
TK-72
TK-75E
10-01-1046
10-01-1048
3