Hatco MH-2 Installation Manual

INSTALLATION MANUAL AND
REPLACEMENT PARTS LIST

PIZZA HUT MODULAR HOT HOLD

Model No. MH-2

HATCO CORPORATION MILWAUKEE, WI 53215 [phone]

REPLACEMENT PARTS LIST

On-Off Lighted Rocker Switch

Base Blanket Element

6

Ft. Cord w/Plug

115V

115/208V, 115/230V

Right Angle Cord Grip

6 Personnel Protector

04-16-029 2

Thumb Screw

PIZZA HUT MODULAR HOT HOLD

Model No. MH-2

ITEM DESCRIPTION PART NO. QUANTITY

1 Thermostat
2
3
4

5
7

02-16-037 2
02-19-027 2
02-05-247 2

02-18-088 1
02-18-085 1

02-20-233 1
05-04-219 10

INSTALLATION, OPERATION, MAINTENANCE

& SERVICE INSTRUCTIONS

INSTALLATION

Remove all packaging material and protective paper from the unit prior to energizing. Place warmer at
point of use, making sure base of unit is stable. Plug the unit into an appropriate 20 amp outlet. (See spec
plate for appropriate voltage 115 V or 115/208 V or 115/230 V.)

OPERATION

Turn the individual shelf switches "on". When the switch is in the "on" position, a red light will appear in
the switch.

The thermostats, which control the operating temperature of the unit, are preset from the factory. If the
unit is not performing satisfactorily, the thermostat may be adjusted with a screwdriver (See Service
Instructions).

MAINTENANCE
WARNING: Unplug unit prior to maintenance. Since the unit may be hot after energizing,

allow to cool prior to maintenance.

To preserve the finish of the MH -2 food warmer, it is recommended that the exterior surfaces be wiped
daily with a damp cloth and mild cleaning agent. Do not use abrasive cleaning materials. Hardcoat
surfaces (those with the black anodized finish) may be cleaned using a non-metallic scrubber. The
stainless steel personnel protectors are removable for cleaning.

SERVICE

There are no user serviceable parts on the MH -2 food warmers with the exception of the adjustable
thermostats. Turning the thermostat adjustment clockwise will increase the operating temperature of the
unit. Conversely, turning the thermostat adjustment counterclockwise will decrease the operating
temperature of the unit.

If the unit does not seem to be operating correctly, contact a service representative.