Page 1
Built-In Full-Size Insulated
Heated Wells
Models: HWBLI-FUL, -FULD, -FULDA
HWBLIB-FUL, -FULD, -FULDA
HWBI-FUL, -FULD, -FULDA
HWBIB-FUL, -FULD, -FULDA
HWBHI-FUL, -FULD, -FULDA
HWBHIB-FUL, -FULD, -FULDA
Project
Item #
Quantity
HWBI-FULD with
accessory food pan
HWBIBFULD
with
accessory
food pan
Hatco insulated Built-In Heated Wells hold heated
food at safe seving temperatures longer. Compared
to other models, Hatco units offer a larger drain
with a at drain screen, more consistent holding
temperatures, heavier stainless steel construction,
easier-to-service design for quick change of
components and a remote thermostat with separate
power switch.
Standard features
• Insulated rectangular full-size well in top or bottom mount
• Fully insulated wells on sides and bottom ensure better
heat retention, and cooler surrounding surfaces for
customer safety
• Separate lighted ON/OFF rocker switch and temperature
dial for easy operation
• Low (120V only), Standard and High Watt
• Available with or without a drain (easy to clean with a
larger drain and a at screen)
• Easy access design allows for quick element or
thermostat change
• EZ locking hardware for quick installation
• Thicker stainless steel construction and solid brazed
joints for durability
• Accessory mounting kits for combustible countertops
available
• Accessory adapters to convert full-size wells to hold
round pans
Options (available at time of purchase only)
c
Additional Power Supply Lead Wire available in one foot
(305 mm) increments (Lead wire only – conduit not included)
(Models are shipped with 1’ [305 mm] of lead wire – no conduit included)
c
HWBI-FUL with Optional Cord (Top Mount only)
c
Mounting Bracket for insulated Bottom Mount (HWBIB series)
Control Box (Options not available for Auto-fill):
c
Standard Thermostat with 6' (1829 mm) Capillary (Standard 120V)
c
ITC Control with Large Control (Not available for low watt, auto-fill configurations
or units without a drain)
c
Larger Recessed Thermostatic Control (Standard for 220/240V and not
available for auto-fill configurations)
c
WM Control Assembly Replacement (Not available for auto-fill or export models)
Standard, ITC, Large Recessed, WM or Auto-fill Control Box Bezel in Designer Colors
(not available for the HWBI-FUL w/Cord – Non-standard colors are non-returnable)
c
Warm Red cBlack cGray Granite cWhite Granite
c
Navy Blue cHunter Green cAntique Copper
Accessories
Rectangular Full-Size Stainless Steel Food Pans:
c
Third-Size (2.5" [64 mm] H) cHalf-Size (2.5" [64 mm] H)
cFull-Size (2.5" [64 mm] H) cFull-Size (4" [101 mm] H)
cFull-Size (6" [152 mm] H)
Round
Food Pans:
c
4 Quart (4 Liter) c7 Quart (7 Liter)
Hinged Lid for Round Pans:
c
4 Quart (4 Liter) c7 Quart (7 Liter)
Notched Lid for Round Pans:
c
4 Quart (4 Liter) c7 Quart (7 Liter)
Adapter to Convert Warmers to hold Round Pans
c
Holds three 4-Quart (4-Liter) Inserts cHolds two 7-Quart (7-Liter) Inserts
Mounting Kit (not necessary for Bottom Mount models) for:
cCombustible Countertops cThick Countertops
c
Mounting Bracket for HWBIB series
Support Bars:
c
12" (305 mm) c20" (508 mm)
c
¾" Ball Valve for Unit with Drains
c
¾" Gate Valve for Unit with Drains
c
Heated Well Remote Handle for ¾" drains (requires a Ball or Gate Valve)
HATCO CORPORATION
(800) 558-0607
Form No. HWBI-FUL Spec Sheet Page 1 of 5 July 2016
(414) 671- 6 350
l
l
www.hatcocorp.com
l
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
l
equipsales@hatcocorp.com
intlsales@hatcocorp.com
l
Page 2
Built-In Full-Size Insulated Heated Wells
Non-Combustible
Countertop
Opening
("Square"
cut-out)
(B)
(A)
Models: HWBLI-FUL, -FULD, -FULDA, HWBLIB-FUL, -FULD, -FULDA, HWBI-FUL, -FULD,
Ordering Instructions
(Please specify the following with each order)
1. Desired Voltage: 120, 208, 220 or 240V
(export voltage available)
2. Drain (With or without)
3. Auto-ll (With or without)
4. Mounting Style
A. Top Mounted
B. Bottom Mounted
HWBI-FULDA, HWBIB-FUL, -FULD, -FULDA, HWBHI-FUL, -FULD, -FULDA,
HWBHIB-FUL, -FULD, -FULDA
5. Wattage
A. High Watt
B. Standard Watt
C. Low Watt (120V only)
6. Agency:
A. UL, C-UL
B. UL-EPH (Sanitary listing)
C. CE mark available
HWBI-FUL Series (Insulated Top Mount Series)
(348 mm)
FRONT
VIEW
3.55" (90 mm)
13.7"
(51 mm)
4.77"
(121 mm)
2"
21.78" (553 mm)
36" (914 mm)
FLEXIBLE CONDUIT
SIDE VIEW
9.45"
(240 mm)
HWBIB-FUL Series (Insulated Bottom Mount Series)
13.97"
(355 mm)
FRONT
VIEW
3.55" (90 mm)
Non-Combustible
Countertop
Opening
("Square"
cut-out)
4.77"
(121 mm)
(B)
2.0"
(51 mm)
(A)
22" (559 mm)
36" (914 mm)
FLEXIBLE CONDUIT
SIDE VIEW
Cutout Dimensions for Non-Combustible Countertops
Model Minimum Width (A) Maximum Width (A) Minimum Depth (B) Maximum Depth (B)
HWBI-FUL, -FULD Series
HWBI-FULDA Series
HWBIB-FUL, -FULD,
-FULDA Series
t
Must be anged.
t
t
HWBI-FULDA Series (Insulated Top Mount Series, Auto-ll)
FRONT
VIEW
13.7"
(348 mm)
10.94"
(278 mm)
5.5"
(140 mm)
(914 mm)
TUBING
(100 mm)
36"
PVC
3.95"
21.78" (553 mm)
36" (914 mm)
FLEXIBLE CONDUIT
SIDE VIEW
HWBIB-FULDA Series (Insulated Bottom Mount Series, Auto-ll)
13.97"
9.45"
(240 mm)
FRONT
12.75" (324 mm)
12.75" (324 mm)
VIEW
(355 mm)
(278 mm)
(140 mm)
10.94"
12.94" (328 mm)
12.94" (328 mm)
5.5"
(100 mm)
36"
(914 mm)
PVC
TUBING
3.95"
20.75" (528 mm)
20.875" (530 mm)
12.03" (306 mm) 12.03" (306 mm) 20.03" (509 mm) 20.03" (509 mm)
22" (559 mm)
36" (914 mm)
FLEXIBLE CONDUIT
SIDE VIEW
20.94" (531 mm)
20.94" (532 mm)
9.45"
(240 mm)
9.45"
(240 mm)
s
22" (559 mm)
22" (559 mm)
22.25" (565 mm)
22.25" (565 mm)
Combustible
Countertop
Opening
("Square" cut-out)
(B)
(A)
Cutout Dimensions for Combustible Countertops
Model Minimum Width (A) Maximum Width (A) Minimum Depth (B) Maximum Depth (B)
HWBI-FUL, -FULD Series
HWBI-FULDA Series
14" (356 mm)
14" (356 mm)
14.25" (362 mm)
14.25" (362 mm)
sAccessory Mounting Kit required for Top Mounts
(800) 558-0607
HATCO CORPORATION
(414) 671- 6 350
l
l
www.hatcocorp.com
l
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
l
equipsales@hatcocorp.com
intlsales@hatcocorp.com
l
Form No. HWBI-FUL Spec Sheet Page 2 of 5 July 2016
Page 3
Built-In Full-Size Insulated Heated Wells
Non-Combustible
Countertop
Opening
("Circular" cut-out)
Combustible
Countertop
Opening
("Square" cut-out)
(A)
(B)
(A)
(A)
6.39"
(162 mm)
10°
CONTROL
PANEL
7.81"
(198 mm)
3.68"
(93 mm)
Optional Larger
Recessed Thermostatic
7.81"
(198 mm)
4.36"
(111 mm)
6.39"
(162 mm)
Optional ITC Electronic
(not available for low watt units
3.44"
5.875"
(149 mm)
6.25"
(159 mm)
WM Assembly Replacement
(not available for International Models)
3.95"
(100 mm)
10°
CONTROL
PANEL
6.39"
(162 mm)
10°
CONTROL
PANEL
7.81"
(198 mm)
3.68"
(93 mm)
Optional Larger
Recessed Thermostatic
7.81"
(198 mm)
4.36"
(111 mm)
6.39"
(162 mm)
Optional ITC Electronic
(not available for low watt units
and only for units with a drain)
3.55"
(90 mm)
4.77"
(121 mm)
2.0"
(51 mm)
4.63"
(117 mm)
3.44"
(87 mm)
(Standard for
HWB-Cord,
without bezel)
3.95"
Thermostatic
5.875"
(149 mm)
6.25"
(159 mm)
WM Assembly Replacement
(not available for International Models)
3.95"
(100 mm)
(with bezel)
2.0"
(51 mm)
10°
CONTROL
PANEL
6.39"
(162 mm)
10°
CONTROL
PANEL
7.81"
(198 mm)
3.68"
(93 mm)
7.81"
(198 mm)
4.36"
(111 mm)
6.39"
(162 mm)
5.875"
(149 mm)
6.25"
(159 mm)
3.95"
(100 mm)
10°
CONTROL
PANEL
Models: HWBLI-FUL, -FULD, -FULDA, HWBLIB-FUL, -FULD, -FULDA, HWBI-FUL, -FULD,
HWBI-FULDA, HWBIB-FUL, -FULD, -FULDA, HWBHI-FUL, -FULD, -FULDA,
HWBHIB-FUL, -FULD, -FULDA
Standard Control
Panel
3.55"
(90 mm)
(with bezel)
4.77"
(121 mm)
Thermostatic
2.0"
(51 mm)
(87 mm)
(Standard for
HWB-Cord,
without bezel)
Optional Control Panels
(not available for auto-ll)
Control Box Opening
(Larger Recessed
Thermostatic shown)
(B)
4.63"
(117 mm)
2.0"
(51 mm)
7.81"
(198 mm)
6.39"
(162 mm)
Optional Larger
Recessed Thermostatic
Cutout Dimensions for Control Boxes
Control Box Minimum Width (A) Maximum Width (B)
Standard Thermostatic without bezel
Standard Thermostatic with bezel
Optional Larger Recessed Thermostatic
Optional ITC Electronic
(not available for 4-QT [4-Liter]) or Low Watt
Optional WM Assembly Replacement
Standard Auto-ll
10°
CONTROL
PANEL
3.68"
(93 mm)
Standard Control Panel
for International
Models Only
10°
CONTROL
PANEL
7.81"
(198 mm)
6.39"
(162 mm)
Optional ITC Electronic
(not available for low watt units
and only for units with a drain)
4.36"
(111 mm)
2.16" (55 mm)
3.25" (83 mm)
5.875" (149 mm)
5.875" (149 mm)
4.78" (121 mm)
10.125 (257 mm)
Standard Control Panel
for Auto-ll Only
10.94" (278 mm)
5.5"
(140 mm)
6.25"
(159 mm)
5.875"
(149 mm)
WM Assembly Replacement
(not available for International Models)
(100 mm)
3.375" (86 mm) Not available
3.75" (95 mm) Not available
6.375" (162 mm) Standard
6.375" (162 mm) Optional
5.00" (127 mm) Not available
4.75 (121 mm) Standard
(100 mm)
3.95"
International
Model
Insulated Full Size Rectangular Models
Model
HWBLI-FUL
HWBLI-FULD
(
Top or Bottom Mount)
Dimensions
(Width x Depth x Height)
13.7" x 21.78" x 9.45"
(348 x 553 x 240 mm)
Optional HWBI-Cord:
13.7" x 21.78" x 14.69"
(348 x 553 x 373 mm)
HWBLI-FULDA
Low Watt
(Top Mount)
HWBLIB-FUL
HWBLIB-FULD
(Bottom Mount)
HWBLIB-FULDA
(Bottom Mount)
(800) 558-0607
Form No. HWBI-FUL Spec Sheet Page 3 of 5 July 2016
13.7" x 21.78" x 9.45"
(348 x 553 x 240 mm)
13.97" x 22" x 9.45"
(355 x 559 x 240 mm)
HATCO CORPORATION
l
(414) 671- 6 350
Volts
(Single Phase)
120 750 6.3
F
Watts Amps
120 765 6.4
750 6.3
120
l
www.hatcocorp.com
l
765 6.4
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
l
The shaded areas contain electrical information for International models only
F
Only control for optional HWBI-Cord is the Thermostatic without a bezel
Optional Plug
Hardwired Standard
Control Conguration
Standard Optional
F
Hardwired
Thermostatic
(with bezel)
NEMA 5-15P
WM Assembly or
Larger Recessed
Thermostatic
Not Available Auto-ll None
Not Available
equipsales@hatcocorp.com
Thermostatic
(with bezel)
Auto-ll None
intlsales@hatcocorp.com
l
WM Assembly or
Larger Recessed
Thermostatic
Ship
Weight*
27 lbs. (12 kg)
26 lbs. (12 kg)
30 lbs. (14 kg)
30 lbs. (14 kg)
29 lbs. (13 kg)
35 lbs. (16 kg)
Page 4
Built-In Full-Size Insulated Heated Wells
Models: HWBLI-FUL, -FULD, -FULDA, HWBLIB-FUL, -FULD, -FULDA, HWBI-FUL, -FULD,
HWBI-FULDA, HWBIB-FUL, -FULD, -FULDA, HWBHI-FUL, -FULD, -FULDA,
HWBHIB-FUL, -FULD, -FULDA
Insulated Full Size Rectangular Models
Model
HWBI-FUL
HWBI-FULD
Top or Bottom Mount)
HWBI-FULDA
(Top Mount)
HWBIB-FUL
HWBIB-FULD
(Bottom Mount)
HWBIB-FULDA
(Bottom Mount)
HWBHI-FUL
HWBHI-FULD
(Top or Bottom Mount)
HWBHI-FULDA
High Watt Standard Watt
(Top Mount)
HWBHIB-FUL
HWBHIB-FULD
(Bottom Mount)
Dimensions
(Width x Depth x Height)
13.7" x 21.78" x 9.45"
(348 x 553 x 240 mm)
Optional HWBI-Cord:
13.7" x 21.78" x 14.69"
(348 x 553 x 373 mm)
13.7" x 21.78" x 9.45"
(348 x 553 x 240 mm)
13.97" x 22" x 9.45"
(355 x 559 x 240 mm)
13.7" x 21.78" x 9.45"
(348 x 553 x 240 mm)
Optional HWBI-Cord:
13.7" x 21.78" x 14.69"
(348 x 553 x 373 mm)
13.7" x 21.78" x 9.45"
(348 x 553 x 240 mm)
13.97" x 22" x 9.45"
(355 x 559 x 240 mm)
F
F
(Single Phase)
120
208
240
220
240 5.0 BS-1363 or AS 3112
220-230 (CE) 5.5 CEE 7/7 SCHUKO
230-240 (CE) 5.0 BS-1363
120
208 5.8
240
120
208 5.8
240 5.0
220
240 5.0
220-230 (CE) 5.5
230-240 (CE) 5.0
120
208 5.9
240
220
240 5.1
220-230 (CE) 1215/1328 5.5/5.8
230-240 (CE) 1116/1215 4.9/5.1
120
208 7.9 NEMA 6-15P
240 6.9 NEMA 6-15P
220
240 6.9 BS-1363 or AS 3112
220-230 (CE) 7.5 CEE 7/7 SCHUKO
230-240 (CE) 6.9 BS-1363
120
208 8.0
240
120
208 7.9
240 6.9
220
240 6.9
220-230 (CE) 7.5
230-240 (CE) 6.9
Volts
Watts Amps
10.0 NEMA 5-20P
1200
1200
1215
1200
1200
1215
1215
1650
1650
1665
1650
1650
5.8 NEMA 6-15P
5.0 NEMA 6-15P
5.5 CEE 7/7 SCHUKO
10.1
5.1
10.0
5.5
10.1
5.1
5.6
13.8 NEMA 5-20P
7.5 CEE 7/7 SCHUKO
13.9
6.9
13.8
7.5
The shaded areas contain electrical information for International models only
F
Only control for optional HWBI-Cord is the Thermostatic without a bezel
Optional Plug
Hardwired Standard
Not Available Auto-ll None
Not Available
Not Available
Not Available Auto-ll None
Not Available
Not Available Auto-ll None
Not Available
Not Available
Control Conguration
Standard Optional
WM Assembly,
Thermostatic
(with bezel)
Larger
Recessed
Thermostatic
(with bezel)
Larger
Recessed
Auto-ll None
Thermostatic
(with bezel)
Larger
Recessed
Thermostatic
(with bezel)
Larger
Recessed
Larger Recessed
Thermostatic
or ITC Control*
ITC Control
(HWBI-FULD
only)
WM Assembly,
Larger Recessed
Thermostatic
or ITC Control*
(*HWBIB-FULD
only)
ITC Control
(HWBIB-FULD
only)
WM Assembly,
Larger Recessed
Thermostatic
or ITC Control*
(*HWBHI-FULD
only)
ITC Control
(HWBHI-FULD
only)
WM Assembly,
Larger Recessed
Thermostatic
or ITC Control*
(*HWBHIB-FULD
only)
ITC Control
(HWBHIB-FULD
only)
F
Ship
Weight*
26 lbs. (12 kg)
25 lbs. (11 kg)
30 lbs. (14 kg)
29 lbs. (13 kg)
35 lbs. (16 kg)
27 lbs. (12 kg)
31 lbs. (14 kg)
31 lbs. (14 kg)
30 lbs. (14 kg)
31 lbs. (14 kg)
HATCO CORPORATION
(800) 558-0607
Form No. HWBI-FUL Spec Sheet Page 4 of 5 July 2016
(414) 671- 6 350
l
l
www.hatcocorp.com
l
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
l
equipsales@hatcocorp.com
intlsales@hatcocorp.com
l
Page 5
Built-In Full-Size Insulated Heated Wells
Models: HWBLI-FUL, -FULD, -FULDA, HWBLIB-FUL, -FULD, -FULDA, HWBI-FUL, -FULD,
HWBI-FULDA, HWBIB-FUL, -FULD, -FULDA, HWBHI-FUL, -FULD, -FULDA,
HWBHIB-FUL, -FULD, -FULDA
Insulated Full Size Rectangular Models
Model
HWBHIB-FULDA
Bottom Mount)
(
High Watt
Dimensions
(Width x Depth x Height)
13.97" x 22" x 9.45"
(355 x 559 x 240 mm)
(Single Phase)
120
208 8.0
240
220
240 7.0
220-230 (CE) 1665/1820 7.6/7.9
230-240 (CE) 1530/1650 6.7/7.0
PLUG CONFIGURATIONS
NE M A 6 -15P
NEMA 5 -20P
Volts
Watts Amps
13.9
1665
7.0
1665
7.6
CEE 7/7 SCHUKONE M A 5 -15P
The shaded areas contain electrical information for International models only
F
Only control for optional HWBI-Cord is the Thermostatic without a bezel
Optional Plug
Hardwired Standard
Not Available Auto-ll None
Not Available
BS 1363
Control Conguration
Standard Optional
Auto-ll None
AS 3112
F
Ship
Weight*
35 lbs. (16 kg)
PRODUCT SPECS
Built-In Insulated Heated Wells
The Built-in Rectangular Insulated Heated Well with or without cord and plug shall be
a Model ….as manufactured by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.
Built-in Heated Well shall be rated at ….watts, ….volts, and be….inches (millimeters)
in overall width and be ….inches (millimeters) in overall depth. It shall consist of
stainless and aluminized steel housing with a metal sheathed heating element, EZ
HATCO CORPORATION
(800) 558-0607
Form No. HWBI-FUL Spec Sheet Page 5 of 5 July 2016
(414) 671- 6 350
l
l
www.hatcocorp.com
l
locking hardware for installation, and a remote thermostat with lighted power switch.
Accessories may include stainless steel mounting kit, adapter bars, adapter top,
support bars, food pans, remote handle and valves.
Warranty consists of 24/7 parts and service assistance (US and Canada only).
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
l
equipsales@hatcocorp.com
intlsales@hatcocorp.com
l
Loading...