Drop-In 4/3-Size
Heated Wells
Models: HWBL-43, -43D, -43DA
HWBLI-43, 43D
HWB-43, 43D, 43DA
HWBI-43, -43D
HWBH-43, -43D, -43DA
HWBHI-43, -43D
Project
Item #
Quantity
HWB-43D with accessory
food pans (single unit
holding 4 one-third
size pans)
Convenient 4/3-Sized Wells hold heated foods at
safe serving temperatures. Like the full-size models,
Hatco units offer a larger drain, more consistent
holding temperatures, heavier stainless steel
construction, easier-to-service design for quick
change of components, and a remote thermostat
with separate power switch.
Standard features
• Rectangular 4/3-Size Wells, uninsulated or insulated
• Superior thermostat controls that read the actual
temperature of the well and add heat only if needed
• Controls feature a separate lighted ON/OFF rocker switch
and temperature dial, allowing preset temperatures to be
maintained
• Low (120V only), Standard and High Watt
• Available with or without a drain (easy to clean with larger
drain and at screen)
• Easy access design allows for quick element or
thermostat change
• Accessory mounting kits for combustible countertops
available
• Accessory adapters to convert 4/3-Size Wells to hold
round pans available
Options (available at time of purchase only)
c
Additional Power Supply Lead Wire available in one foot
(305 mm) increments (Lead wire only – conduit not included)
(Models are shipped with 1’ [305 mm] of lead wire – no conduit included)
Control Box (Options not available for Auto-fill):
c
Standard (Compact) Thermostat with 6' (1829 mm) Capillary
c
ITC Control with Large Control (Not available for low watt, auto-fill configurations
or units without a drain)
c
Larger Recessed Thermostatic Control (Standard for 220/240V and not
available for auto-fill configurations)
c
WM Control Assembly Replacement (Not available for export models or auto-fill)
Control Box Bezel in Designer Colors for WM Control Assembly or Flush Mount only:
(Non-standard colors are non-returnable)
c
Warm Red
c
Navy Blue
Left or Right Water Fill Hole for HWBL-, HWB-, HWBH-43DA only (Front is standard)
cRight
c
Black
c
Hunter Green cAntique Copper
c
Left
c
Gray Granite cWhite Granite
Accessories
Rectangular Full-Size Stainless Steel Food Pans:
c
Third-Size (2.5" [64 mm] H) cHalf-Size (2.5" [64 mm] H)
cFull-Size (2.5" [64 mm] H) cFull-Size (4" [101 mm] H)
cFull-Size (6" [152 mm] H)
Round
Food Pans:
c
11 Quart (10 Liter)
Hinged Lid for Round Pans:
c
11 Quart (10 Liter)
Notched Lid for Round Pans:
c
11 Quart (10 Liter)
Stainless Steel Wire Trivets:
c
Half-Size
Plated Wire Trivets:
c
Half-Size
c
Adapter to Convert Warmers to hold Round Pans which holds two
11-Quart (10-Liter) Inserts
Support Bars:
c
12" (305 mm) c20" (508 mm)
c
Mounting Kit for Combustible Countertops
c
¾" Ball Valve for Unit with Drains
c
¾" Gate Valve for Unit with Drains
c
Heated Well Remote Handle for ¾" drains (requires a Ball or Gate Valve)
c
Full-Size
c
Full-Size
HATCO CORPORATION
(800) 558-0607
Form No. HWB-43 Spec Sheet Page 1 of 4 July 2016
(414) 671- 6 350
l
l
www.hatcocorp.com
l
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
l
equipsales@hatcocorp.com
intlsales@hatcocorp.com
l
Drop-In 4/3-Size Heated Wells
Non-Combustible
Countertop
Opening
("Square"
cut-out)
6.39"
(162 mm)
10°
CONTROL
PANEL
7.81"
(198 mm)
3.68"
(93 mm)
Optional Larger
Recessed Thermostatic
7.81"
(198 mm)
4.36"
(111 mm)
6.39"
(162 mm)
Optional ITC Electronic
(not available for low watt units
5.875"
(149 mm)
6.25"
(159 mm)
WM Assembly Replacement
(not available for International Models)
3.95"
(100 mm)
6.39"
(162 mm)
10°
CONTROL
PANEL
7.81"
(198 mm)
3.68"
(93 mm)
Optional Larger
Recessed Thermostatic
7.81"
(198 mm)
4.36"
(111 mm)
6.39"
(162 mm)
Optional ITC Electronic
(not available for low watt units
and only for units with a drain)
3.55"
(90 mm)
4.77"
(121 mm)
2.0"
(51 mm)
4.63"
(117 mm)
3.44"
(87 mm)
(Standard for
HWB-Cord,
without bezel)
3.95"
Thermostatic
5.875"
(149 mm)
6.25"
(159 mm)
WM Assembly Replacement
(not available for International Models)
3.95"
(100 mm)
(with bezel)
2.0"
(51 mm)
10°
CONTROL
PANEL
6.39"
(162 mm)
10°
CONTROL
PANEL
7.81"
(198 mm)
3.68"
(93 mm)
7.81"
(198 mm)
4.36"
(111 mm)
6.39"
(162 mm)
5.875"
(149 mm)
6.25"
(159 mm)
3.95"
(100 mm)
10°
CONTROL
PANEL
Models: HWBL-43, -43D, -43DA, HWBLI-43, -43D, HWB-43, -43D, -43DA, HWBI-43, -43D,
HWBH-43, -43D, 43DA, HWBHI-43, -43D
Ordering Instructions
1. Desired Voltage: 120, 208, 220 or 240V
(export voltage available)
2. Base Size of Heated Well
A. 12" x 27" (305 x 686 mm)
3. Drain (With or without)
HWBI-43 Series (Insulated)
(345 mm)
2.0"
(51 mm)
4.77"
(121 mm)
VIEW
3.55" (90 mm)
Non-Combustible
Countertop
Opening
("Square"
cut-out)
(A)
(B)
(Please specify the following with each order)
4. Auto-ll (With or without)
Location on HWB-43DA only
A. Front (Standard)
B. Left
C. Right
5. Insulated or Uninsulated
6. Wattage
A. High Watt
B. Standard Watt
C. Low Watt (120V only)
7. Agency:
A. UL, C-UL
B. UL-EPH (Sanitary listing)
C. CE mark available
HWB-43 Series (Uninsulated)
28.58" (726 mm)
36" (914 mm)
FLEXIBLE
CONDUIT
SIDE VIEW
9.45"
(240 mm)
(345 mm)
3.55" (90 mm)
FRONT VIEW
4.77"
(121 mm)
2.0"
(51 mm)
28.58" (726 mm)
36" (914 mm)
FLEXIBLE
CONDUIT
SIDE VIEW
(160 mm)
OPTIONAL DRAIN
FITTING ¾" NPT
6.3"
8.56"
(217 mm)
13.58"
Cutout Dimensions for Non-Combustible Countertops
Model Minimum Width (A) Maximum Width (A) Minimum Depth (B) Maximum Depth (B)
HWB-, HWBI-43 Series
12.69" (322 mm)
12.94" (329 mm)
27.69" (703 mm)
28.00" (711 mm)
s
29.00" (737 mm)
29.25" (743 mm)
Combustible
Countertop
Opening
("Square" cut-out)
(B)
(A)
Cutout Dimensions for Combustible Countertops
Model Minimum Width (A) Maximum Width (A) Minimum Depth (B) Maximum Depth (B)
HWB-, HWBI-43 Series
14.00" (356 mm)
14.25" (362 mm)
sAccessory Mounting Kit required for Top Mounts
Standard Control
Panel
(with bezel)
4.77"
(121 mm)
3.55"
(90 mm)
2.0"
(51 mm)
3.44"
(87 mm)
(Standard for
HWB-Cord,
without bezel)
4.63"
(117 mm)
2.0"
(51 mm)
Standard Control Panel
for Export Voltages Only
Standard Control Panel
for Auto-ll Only
(100 mm)
5.5"
(140 mm)
10.94" (278 mm)
Thermostatic
Optional Control Panels (not available for auto-ll)
10°
CONTROL
PANEL
Form No. HWB-43 Spec Sheet Page 2 of 4 July 2016
6.39"
(162 mm)
(800) 558-0607
7.81"
(198 mm)
3.68"
(93 mm)
Optional Larger
Recessed Thermostatic
HATCO CORPORATION
(414) 671- 6 350
l
6.39"
(162 mm)
(not available for low watt units
and only for units with a drain)
l
7.81"
(198 mm)
Optional ITC Electronic
www.hatcocorp.com
10°
CONTROL
PANEL
5.875"
4.36"
(111 mm)
l
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
(149 mm)
WM Assembly Replacement
(not available for International Models)
l
equipsales@hatcocorp.com
6.25"
(159 mm)
3.95"
(100 mm)
intlsales@hatcocorp.com
l