Hatco HCWBI-3DA Parts Manual
IMPORTANT NOTE:
CAUTION
Locate the Specification Label on unit to determine
exact Model Name and electrical specifications. This
information is needed to identify the correct
replacement parts. See exploded view illustration(s)
for Specification Label location.
Use of replacement parts other than those supplied
by Hatco Corporation may result in damage to unit
or injury to personnel and will void all warranties.
Hot/Cold Drop-In Wells
HCWBI Series
Model Name Page
Main Assembly ..........2
Control Enclosure ......3
Hydro-Heater ............4
Replacement Parts List
© 2016 Hatco Corporation
H C W B I - X D A
Hot/Cold Well
Built-In
Insulated Top Mount
Quantity of Pans
Individual Drain Equipped
Auto-Fill Equipped
Hatco Hot/Cold Drop-In Wells
4
7
6
5
1
2
See
CONTROL
ENCLOSURE
Section
See
HYDRO-HEATER
ASSEMBLY
Section
3
Specification label
on back of
control enclosure.
Model Designation
HCWBI Series—Main Assembly
2
Form No. HCWBIRP-0516
Parts for Main Assembly (illustration on page 2)
2
7
1
6
4
3
5
Week Fifty-One
1151
Year 2011
Item Description Part No. Qty.
1 Pan Support
HCWBI-2DA 04.47.266.00 1
HCWBI-3DA 04.47.264.00 1
HCWBI-4DA 04.47.266.00 2
HCWBI-5DA 04.47.264.00 1
04.47.266.00 1
HCWBI-6DA 04.47.264.00 2
2 Pan Divider 04.47.090.00 1–5
3 Baffle
2 Pan 04.47.260.00 1
3 Pan 04.47.261.00 1
4 Pan 04.47.262.00 1
5 Pan 04.47.263.00 1
6 Pan 04.47.216.00 1
Item Description Part No. Qty.
4 Mushroom Probe 02.01.122.00 1
5 Sensor Cover 04.47.259.00 1
6 TXV Valve
HCWBI-2DA, -3DA, and -4DA 03.02.075.00 1
HCWBI-5DA and -6DA 03.02.076.00 1
7 Condensing Unit
HCWBI-2DA and -3DA 03.13.007.00 1
HCWBI-4DA 03.13.008.00 1
HCWBI-5DA and -6DA 03.13.009.00 1
NOTE: Quantities shown as a range (example = “1–5”) are dependent upon the number of wells in a unit.
Control Enclosure
Item Description Part No. Qty.
Controller, Electronic w/ Probe
1
Cold Wells
Hot Wells
Control Label
2
3 Switch, Rocker 02.19.242.00 1
4 Pilot Light 02.19.153.00 1
R02.01.375.02 1
R02.01.375.03 1
07.03.786.00 1
Item Description Part No. Qty.
Cord Grip R02.20.259.00 1
5
Cord 02.18.151.00 1
6
Relay † 02.01.088.00 1 or 3
7
† Date code 1610 or earlier, uses 1 Relay.
NOTE: The last four digits in a ten digit numerical serial number are the manufacturing date code.
Example: Serial number 9625061151 has a date code of “1151” which indicates the following:
Form No. HCWBIRP-0516
3
Loading...