Hatco FDW-1-MN Installation Manual

ITEM#

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
[phone] • [phone] • Fax [phone] • Int’l. Fax [phone]
www.hatcocorp.com • E-mail: [e-mail]

Form No. MN-1005(S)

Printed in U.S.A.

MACHO NACHO

™

CHIP WARMERS

Models FDW-1-MN, FST-1-MN

The Hatco Macho Nacho Holding and
Display Cabinet is a high-visibility
merchandiser for warming and displaying
nacho chips. These heated displays use
no humidity and hold up to 25 lbs. (11 kg)
or 40 lbs. (18 kg) of chips, keeping them
hot, fresh, and crisp considerably longer
than other warmers, reducing refill time
and minimizing waste.

The unique air flow forces warm air to
the bottom and is distributed into the
cabinet through holes in the floor panels,
directing maximum heat to the chips
being served. Macho Nacho circulates
air to prevent the loss of natural oils,
eliminating the need to frequently
replace stale chips.

Built of stainless steel or aluminum
with tempered glass sides and doors,
Macho Nacho features a stainless steel
front housing, painted top, and eye
catching decals.

FLEXIBILITY

Macho Nacho’s two-door access permits
easy loading and serving. Chips flow to
the front of the cabinet when loading
through the upper door and the heated,
slanted floor panel slides the hot chips
to the lower door for serving.

The user-friendly control panel makes
it easy to operate and only minimum
maintenance is required. The chip slide
and floor panels are removable for ease
of cleaning.

QUALITY

The following features assure the finest
performance for years to come:

• Built of stainless steel or aluminum
with tempered glass sides and doors.

• Shatter-resistant incandescent
lights enhance food appeal while
safeguarding food products from
bulb breakage.

• Snappy graphic decals for three sides
help promote product.

• Anodized bronze finish is standard on
the FST model.

• All models come with 6' (1829 mm)
cord and plug.

METAL SHEATHED AIR HEATING ELEMENTS
GUARANTEED AGAINST BURNOUT AND BREAKAGE
FOR TWO YEARS.

Model FDW-1-MN

Model FST-1-MN
with standard
bronze finish

ANSI/NSF 4

67

DIMENSIONS

FDW-1-MN: 18"W x 225⁄8"D x 271⁄2"H (457 x 575 x 699 mm).
Cabinet Openings: Upper Door 15

1

⁄4"W x 91⁄4"H (387 x 235 mm).

Lower Door 15

1

⁄4"W x 91⁄4"H (387 x 235 mm).

FST-1-MN: 22

7

⁄8"W x 27"D x 325⁄8"H (581 x 686 x 829 mm).

Cabinet Openings: Upper Door 18

1

⁄4"W x 111⁄4"H (464 x 286 mm).

Lower Door 18

1

⁄4"Wx 91⁄4"H (464 x 235 mm).

VOLTAGE

FDW-1-MN: 120 volts, 1128 watts, 9.4 amps (uses NEMA 5-15P).

220 volts, 1118 watts, 5.1 amps (uses CEE 7/7 Schuko
plug configuration).

240 volts, 1128 watts, 4.7 amps (uses BS-1363
plug configuration).

FST-1-MN: 120 volts, 1245 watts, 10.4 amps (uses NEMA 5-15P).

220 volts, 1225 watts, 5.6 amps (uses CEE 7/7 Schuko
plug configuration).

240 volts, 1445 watts, 5.2 amps (uses BS-1363
plug configuration).

CORD LOCATION

FDW-1-MN: Facing controls, underneath left corner.
FST-1-MN: Facing controls, left-hand side panel, bottom

right corner.

PLUG CONFIGURATIONS

BS-1363CEE 7/7 SchukoNEMA 5-15P

ITEM#

SPECIFICATIONS

MACHO NACHO

™

CHIP WARMERS

Models FDW-1-MN, FST-1-MN

PRODUCT SPECS

Chip Warmer

The Holding and Display Cabinet shall be a Flav-R-Fresh

®

(or Flav-R-Savor®) Macho Nacho™Model .....as manufactured

by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.

The Chip Warmer Cabinet shall be rated at ....volts and ....watts

and be ....inches (millimeters) in overall width.

Model Type Shipping Weight

FDW-1-MN 2 Doors 80 lbs. (36 kg)
FST-1-MN 2 Doors 132 lbs. (60 kg)

Model FDW-1-MN Model FST-1-MN

OPTIONS (NOT FOR RETROFIT)

❑ Clear Anodized Finish (FST Model)

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • [phone] • [phone]
Fax [phone] • Int’l. Fax [phone] • www.hatcocorp.com • E-mail: [e-mail]

Form No. MN-1005(S) Printed in U.S.A.

68

It shall consist of two doors, tempered glass sides and doors,
incandescent display lights, and merchandising graphics.
A 6' (1829 mm) cord with plug shall be attached.

18"

(457 mm)

227⁄8"

(581 mm)

18"

(457 mm)

FRONT VIEW

225⁄8"

(575 mm)

SIDE VIEW

271⁄2"

(699 mm)

325⁄8"

(829 mm)

227⁄8"

(581 mm)

FRONT VIEW SIDE VIEW

27" (686 mm)