Hatco 3CS-3 Parts List
Sanitizing Sink Heater
REPLACEMENT
PARTS LIST
3CS-3
3CS-4
3CS-6
3CS-9
3CS Series
HATCO 3CS SERIES
SANITIZING SINK HEATERS
18
33B
9, 10
8
7
22
39
28
20
43
23
34
35
32
2
31
29
3
4
30
21
27
11
5
16
15
17, 36
41
14
25
24
6
6
26
26
13
12
1
42
40
33A
38
19
19
Model Designation
3CS-X
3=Three
C=Compartment
S=Sink Heater
X=Kilowatts
Form No. 3CSRP - 0401 2 Printed in U.S.A.
CAUTION - Use of replacement parts
other than those supplied by Hatco
Corporation may result in damage to the
unit or injury to personnel.
Form No. 3CSRP - 0401 3 Printed in U.S.A.
1 On/Off Power Switch 02.19.008A.00 1
2 Control,Thermostat,
192°F (89°C) 02.16.003A.00 1
3 Thermostat, Overtemp,
205°F (96°C) 02.16.004.00 1
4 Thermostat, At-Temp,
175°F (79°C), (optional) 02.16.004A.00 1
5 Mounting Bolts 05.04.062.00 4-8
6 Gasket, Element 05.06.005.00 1-2
7 Drain Cap, Heating
Compartment R03.40.014.00 1
8 Handle, Sump Drain 03.02.001B.00 1
9 Ball Valve, Sweat Fitting
(old style) 03.02.002.00 1
10 Ball Valve, Thread Fitting
(new style) 03.02.001.00 1
11 Temperature Monitor
(optional) 03.01.005.00 1
PARTS COMMON TO ALL 3CS MODELS
12 Stopper, Rubber 05.06.026.00 1
13 Sink Strainer Assembly Kit R05.30.009.00 2
14 Strainer Gasket Kit R00.05.0002.00 1
15 Indicator Light, Green 02.19.150.00 1
16 Indicator Light, Red 02.19.151.00 1
17 Indicator Light, Yellow 02.19.152.00 1
18 Hose with Adaptor 05.06.010.00 1
19 Grommets, Black Molded
Rubber 05.06.008.00 2
20 Drain Screen Plug, 1" (3 cm) 02.20.026.00 1
21 Control Relay R02.01.025.00 1
22 Mounting Bracket,
Thermostat (for #3 & #4) 04.20.003.00 1
23 Mounting Bracket,
Control Thermostat (for #2) 04.20.004.00 1
24 Brass Locknut 05.30.009A.00 2
25 Union Gasket 05.06.009.00 2
ITEM DESCRIPTION PART NO. QTY.
ITEM DESCRIPTION PART NO. QTY.
Shaded area in parts lists on the following pages reflects export models only.
Note: S.S. is an abbreviation for stainless steel on the following pages.
Loading...