Harman-Kardon CITATION 5.1 User Manual
5.1 Amplifier Owner's Manual
Table of Contents
Important Safety Information ...............................................................................4
Introduction..........................................................................................................6
Description ...........................................................................................................6
Unpacking and Installation ...................................................................................7
Rear Panel Connections ........................................................................................8
Power Control Connections ..................................................................................9
Channel Configurations ......................................................................................11
System Connections ............................................................................................12
Input and Bridging Connections.........................................................................13
Speaker Wire Preparation and Connection..........................................................17
Operation............................................................................................................19
Service Information.............................................................................................20
Troubleshooting Guide........................................................................................21
Specifications.......................................................................................................22
3
Madrigal Audio Laboratories
2081 South Main Street, P.O. Box 781
Middletown, CT 06457 USA
Made in USA
©1995 Harman Kardon, Incorporated
Important Safety Information
Verify Line Voltage Before Use
Your new Citation 5.1 amplifier has been factory configured for a specific line voltage: 110-120 volts for North America or 220-240 volts in most other countries.
Connecting the amplifier to a line voltage other than that for which it is intended
can create a safety and fire hazard, and may damage the amplifier.
If you have any questions about the voltage requirements for your specific model,
or about the line voltage in your area, contact your Citation dealer before plugging
the unit into an AC wall outlet.
Verify AC Circuit Capacity Before Use
High power output of your Citation amplifier requires heavy current draw under
full load conditions. To insure proper performance, and to avoid potential safety
hazards, we recommend that it be connected to a circuit with 20 ampere capacity.
Connecting multiple amplifiers to the same circuit, or connecting it to a circuit
used by other heavy power devices such as high wattage lights may cause circuit
breakers to trip. It is always a good idea to avoid using any audio equipment on the
same AC circuit as equipment with motors, such as air conditioners or refrigerators. This will lessen the possibility of power variation and electrical start-up noise
affecting your sound system.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied with your unit. If a replacement cord is used, make certain that it is of similar gauge. We do not recommend that
extension cords be used with this product. As with all electrical devices, do not run
power cords under rugs or carpets or place heavy objects on them. Damaged power
cords should be replaced immediately with cords meeting factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the plug, never
pull the cord. If you do not intend to use the amplifier for any considerable length
of time, disconnect the plug from the AC outlet.
Do Not Open the Cabinet
There are no user serviceable components inside this product. Opening the cabinet
may present a shock hazard, and any modification to the product will void your
guarantee. If water or any metal object such as a paper clip, wire or a staple accidentally falls inside the unit, disconnect it from the AC power source immediately,
and consult an authorized service station.
4
Installation Location
• To assure proper operation, and to avoid the potential for safety hazards, place the
unit on a firm and level surface. When placing the unit on a shelf, be certain that
the shelf and any mounting hardware can support the amplifier. Remember, the
Citation 5.1 weighs over 60 pounds.
• High powered audio amplifiers such as the Citation 5.1 may develop moderate
amounts of heat. Therefore, if the unit is installed in a cabinet it is recommended
that the rear of the cabinet be left open to permit air circulation. If that is not
possible, ventilation holes should be placed at both the top and bottom of the
cabinet or enclosure, or at the sides, bottom and top. A minimum of six (6)
inches should be provided between each side of the unit and the cabinet, and at
least twelve (12) inches above and two (2) inches below the unit. In some cases a
fan may be required to provide for air movement within a cabinet. Please consult
your dealer or installer for more information.
• Do not place the unit directly on a carpeted surface.
• Avoid installation in extremely hot or cold locations, or in an area that is exposed
to direct sunlight or heating equipment.
• Avoid moist or humid locations.
• Do not obstruct the ventilation slots on the top of the unit, or place objects
directly over them.
• Speaker wiring, input cables and power cords should be carefully placed so that
they do not come in contact with, or intefere with the external heat sinks.
Cleaning
When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, first wipe
the surface with a soft cloth slightly dampened with mild soapy water, then a fresh
cloth with clean water. Wipe dry immediately with a dry cloth. NEVER use benzene,
thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as
they may damage the finish of metal parts. Avoid spraying insecticide near the unit.
Moving the Unit
Before moving the unit, remove any interconnect cords, and unplug it from the
AC outlet.
5
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To prevent electric shock, do not remove the grounding plug on the power cord, or use any
plug or extension cord that does not have a grounding plug provided. Make certain that the AC outlet is
properly grounded. Do not use an adapter plug with this product.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the litera-
ture accompanying the appliance.
Introduction
Congratulations! As the owner of a Citation 5.1 Multi Channel Power
Amplifier, you have at your command a unique product. The Citation 5.1 has been
carefully designed to deliver the best possible sonic performance, along with outstanding industrial design to match the rest of the Citation series, or to complement any interior design. Combining sculpted metal panels, the latest state of the
art circuit design, and Harman Kardon’s forty-year heritage of audio excellence, the
Citation 5.1 will bring many years of enjoyable listening to your music or home
theater system.
In order to fully enjoy the performance of your new amplifier, please take a few
minutes to read this manual. It contains important information that will help you
to properly configure the amplifier for use with the rest of your audio system. The
brief investment of time spent in reading this manual will yield major dividends in
the form of listening enjoyment.
If you have any questions about this product, its installation or operation, please
contact your retailer or custom installer. They are your best source of product information. Should you need additional information or assistance, the toll-free number
for the Citation Center is 800-787-6766.
Welcome to the Citation family. We wish you many years of listening pleasure!
Description
The Citation 5.1 is a flexible, state of the art audio power amplifier designed to
deliver high performance in a variety of applications. Each of the four amplification
channels has a separate power supply, which means that it delivers audiophile performance no matter which configuration is selected. You may operate the 5.1 in a
two, three or four-channel mode, and benefit from the following array of sophisticated features:
• Ultrawide bandwidth design
• Low negative feedback
• Fully complementary bipolar circuitry with over-designed output stage for
high reliability
• Low harmonic and intermodulation distortion
6
5.1 Amplifier
• Massive heat sinks for silent convection cooling
• High current power supply design with massive torrodial transformer
• Quad mono power supply
• New, linearized pre-driver stage circuit
• Remote turn on/turn off circuitry with automatic sequencing
Unpacking and Installation
The carton and shipping materials used in protecting your new amplifier were specially designed to cushion it from the shocks and vibration of shipping. We suggest
that you save the carton and packing materials for use in shipping if you move or
should the unit ever need repair.
To minimize the size of the carton in storage, you may wish to flatten it. This is
done by carefully slitting the tape seams on the bottom and collapsing the carton
down to a more two-dimensional appearance. Other cardboard inserts may be
stored in the same manner. Packing materials that cannot be collapsed should be
saved along with the carton in a plastic bag.
In order to assure a high level of performance and long life, the Citation 5.1 has
been engineered from robust materials. This weight, however, requires, that you
pay special attention to unpacking and installation of the unit. First, you may wish
to have someone help you remove the unit from its carton and place it in the proper location. In addition, when moving the amplifier, be careful not to set it down
on the heat sink edges to avoid damage to their surface or finish. Similarly, be careful to avoid scratching any contact surface with the heat sinks, as their edges may
be sharp.
Make certain that any shelf or stand is capable of supporting the weight of the
amplifier. This is particularly true if you will be stacking multiple amplifiers on the
same shelf.
When positioning the amplifier in its final location, make certain that it has adequate ventilation on all sides, as well as on the top and bottom. Do not place CDs,
record jackets, owner’s manuals, or other paper, on top of, or beneath the unit, or
between multiple amplifiers in a stack. This will block air flow, causing degraded
performance and a possible fire hazard. If the unit is to be enclosed in a cabinet or
rack, make certain that there is adequate air circulation, with a means provided for
hot air to exit, and for cool air to be brought in. In some instances, a fan may be
required for this purpose. If you are in doubt as to the ventilation requirements,
please consult with your dealer or installer.
When stacking multiple Citation 5.1 amplifiers in a rack or cabinet, place the unit
which will power front and/or center channel speakers at the bottom of the stack.
Next, place the amplifier used for surround speakers in the center. The unit which
will be used to power subwoofers should be at the top of the stack.
7
Rear Panel Connections
8
REMOTE
REMOTE
TURN ON
DC
IN
ON
OFF
MANUAL
TURN ON
DC
OUT
+
–
+
–
+
–
CH 1 INPUT
(BRIDGED INPUT)
BRIDGED
MODE
CH
2 INPUT
(NOT USED IN
BRIDGED MODE)
NORMAL
MODE
BRIDGED
+
–
+
–
+
–
CH 3 INPUT
(BRIDGED INPUT)
BRIDGED
MODE
CH
4 INPUT
(NOT USED IN
BRIDGED MODE)
BRIDGED
NORMAL
MODE
CH 1 OUTPUT CH 2 OUTPUT
CH
3 OUTPUT CH 4 OUTPUT
5.1 Multi-Channel
Power Amplifier
DESIGNED & MANUFACTURED
IN THE USA.
Citation,a division of
Harman Kardon,
Hayward, CA.
SERIAL NUMBER
WHEN USING THESE CHANNELS IN BRIDGED MODE,
USE THE CH 1 INPUT AND CONNECT THE SPEAKER TO
THE RED TERMINALS AS DIAGRAMMED ABOVE.
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WHEN USING THESE CHANNELS IN BRIDGED MODE,
USE THE CH 3 INPUT AND CONNECT THE SPEAKER TO
THE RED TERMINALS AS DIAGRAMMED ABOVE.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE. DO NOT REMOVE COVER. NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
120V ~ 50/60Hz
1200 WATTS
BRIDGED BRIDGED
Bridged/Normal Switches: These switches control the output configuration of a pair of channels.
Switch them down for normal use. Switch them down to “bridged” to combine amplifier channels for
higher power output. See page 13 for more information on channel configuration and bridging.
Power Switch: This is the master AC power
switch for the unit. See page 19 for more
information.
Remote In: This is the input jack for remote
turn on control of the 5.1. Connect it to a
Citation Controller, and another Citation
amplifier or other approved devices.
See page 9 for more information.
Manual/Remote Switch: The switch controls
the power turn on of the 5.1. When switched up
and in the “manual” position, power is turned
on or off by the rear panel switch. When
switched down to the “remote” position, power
is controlled by signals from the Citation 7.0
controller or some other device. See page 9
for more information.
Remote Out: This is the output jack used
to carry control signals for remote turn on
of additional Citation amplifiers in your
system. See page 9 for more information.
Speaker Connection Binding Posts: Connect the
wire running to your speakers to these binding posts.
See page 11 for information on channel configurations
connections. See page 17 for information on connecting
speaker wire to the terminals.
Audio Input Connections: See page 13
for information on proper connections
and input configurations.
Power Cord Connector:
Connect the AC power cord here.
Loading...