Harley Davidson Softail 2003 Owner's manual

206

put

Softail

our signatureon ours.

We set out to build the very essence of the Harley-Davidson motorcycle. And what emerged was the Softail – a bike with classic hardtail looks and plenty of space where you can leave your mark.

207

2003 flstci Stock Production Paint, 100th Anniversary two-tone – Sterling Silver and Vivid Black

208

209

heritage Softailclassic

This Heritage Softail Classic is a perfect blend of old and new, featuring Headlamp, Passing Lamp and Turn Signal Trim Rings, Wide Beach Handlebar and 100th Anniversary Tank Panel, with old-school looks courtesy of the Nostalgic and “Classic Chrome” Collections.

NEW BEACH BARS FOR HERITAGE CLASSIC 56364-02

NEW JIFFY STAND STRAP AND FASTENER KIT 50306-02

NEW SWINGARM PIVOT BOLT AND NUT KIT 47119-02

NEW COMBINATION SPEEDO/TACH KIT 74461-03

NEW CHROME LOWER TRIPLE TREE COVER 66053-01

NEW 100TH ANNIVERSARY TANK PANEL 62075-03

NEW WIDE WHITEWALL TYRE 43118-92A Front

43353-03 Rear NEW SWINGARM PIVOT AXLE KIT

47119-02

HEADLAMP TRIM RING 69626-99

PASSING LAMP TRIM RINGS 69622-99A (pair)

TURN SIGNAL TRIM RINGS 69740-01 (2 sets)

CHROME UPPER FORK SLIDER COVERS 45963-97

CHROME LOWER FRONT FORK SLIDERS 46482-00 Softail

CLASSIC CHROME FRONT AXLE NUT COVER KIT 43899-86A

CHROME FRONT FENDER SKIRT 59228-91

CHROME FORK COVER KIT 67890-91A

NOSTALGIC HAND GRIPS 56275-96A

CHROME HAND CONTROL LEVER KIT 45075-96

CHROME SWITCH HOUSING KIT 70222-96

CHROME MASTER CYLINDER COVER 45078-96A

2003 flstci Stock Production Paint, 100th Anniversary Two-Tone – Sterling Silver and Vivid Black

CHROME CLUTCH BRACKET AND MASTER CYLINDER RESERVOIR KIT 45284-99

CHROME VOLTAGE REGULATOR COVER 74597-01

OIL PRESSURE GAUGE KIT 75133-99

BRAIDED OIL LINES 63860-00

NOSTALGIC SHIFTER PEGS 34627-99 (2)

RIDER FOOTBOARD ASSEMBLY, OLD STYLE 50599-89T (2 sets)

NOSTALGIC BRAKE PEDAL PAD 44248-96

SOFTAIL FRAME TRIM SET 47300-88T

PROFILE LOW SUSPENSION 54596-94 Front

54648-00 Rear HARLEY-DAVIDSON SOFTAIL SLIP-ON

MUFFLERS 80378-00 Slash Down

LAYBACK LICENSE PLATE MOUNTING KIT 59817-00

210 211

Softailstandard

The all-new Black Bones Radical Custom Paint scheme forms the centrepiece of this Softail Standard, which features road-hugging Profile Low Rear Suspension and Baloney Cut Slip-On Mufflers. A new Slotted Style Heel Rest Kit, Brake Pedal Pad and Pegs combine with front and rear Mirror Chrome ThunderStar Wheels to add polish to this custom brute.

NEW RADICAL PAINT BLACK AND BONE WHITE 95703-03BGB

NEW SLOTTED STYLE SHIFTER PEG 34673-02 (2 sets)

—

NEW SLOTTED STYLE HEEL REST PEG KIT 50288-02

NEW SLOTTED STYLE BRAKE PAD 42799-02 Small

NEW 100TH ANNIVERSARY BADLANDER SEAT 53304-03

THUNDERSTAR MIRROR CHROME WHEEL 43602-00 21" Front

43649-00 16" Rear THUNDERSTAR FLOATING BRAKE ROTOR

44365-00 Front 44366-00 Rear THUNDERSTAR BILLET SPROCKET

40126-00

CHROME LOWER FORK SLIDERS 46477-00

BILLET TRIPLE TREE KIT 45748-01

CHROME FRONT CALIPER KIT 44395-00

CLASSIC CHROME BRAKE CALIPER INSERTS 44477-99 (2)

CLASSIC CHROME FRONT AXLE NUT COVERS 43899-86A

SMOKED TURN SIGNAL LENSES 69304-02

OVAL BAR & SHIELD BILLET STYLE MIRRORS 91962-98

CONTOURED CHROME & RUBBER HAND GRIPS 56459-01

CUSTOM HAND CONTROL LEVERS 45459-02

CHROME SWITCH HOUSING KIT 70222-96

CHROME MASTER CYLINDER COVER 45078-96A

CHROME CLUTCH BRACKET AND MASTER CYLINDER RESERVOIR KIT 45284-99

MINI TACH KIT 67848-96B

2003 fxst Colour Shop Radical Paint, Bones—Black and BoneWhite

BILLET MINI TACH MOUNT AND HANDLEBAR CLAMP 68962-98

SKULL LEATHER TANK PANEL 91001-01

HARLEY-DAVIDSON AIR CLEANER COVER 29754-01

“H-D MOTOR CO.” TIMER COVER 32691-99 Satin Chrome

SLOTTED STYLE FOOTPEGS 43280-01 (2 sets)

BILLET HEEL RESTS FOR FORWARD CONTROLS 50227-01

BILLET STYLE REAR BRAKE LEVER 42632-00

CHROME REAR CALIPER KIT 44414-01

SLIP-ON MUFFLERS, BALONEY CUT 80375-00 Shorty Dual Style

SIX-SHOOTER REAR AXLE COVER AND ADJUSTER 48179-98A

PROFILE LOW REAR SUSPENSION 54648-00A

212 213

Softail deuce

When this Deuce rumbles to life, it’s poetry in motion thanks to the elegance of its new Select Bright Pearl White-over-White Ghost Flames Paint scheme and Chrome Slotted Six-Spoke Wheels. More custom appeal is supplied by a full complement of Smooth Chrome Grips, Pegs and Pads, and other choice options like a Mini-Tach Mount Kit and Chrome-Plated Swingarm.

NEW GHOST FLAMES SELECT PAINT – BRIGHT PEARL WHITE OVER WHITE 95704-03BFJ

NEW CHROME SIX SPOKE SLOTTED CUSTOM WHEEL 43934-02 17" Rear

43924-02 21" Front NEW BUCKSHOT HAND

CONTROL LEVERS 45430-02

NEW DEUCE MINI TACH MOUNT KIT 69188-02

NEW BULLET STYLE SHIFT LINKAGE 34616-02

NEW BULLET SHIFT LEVER 34604-02

NEW LOW-PROFILE OSTRICH SEAT 52074-02 Icarus Pattern

HARLEY-DAVIDSON AIR CLEANER COVER 29754-01

HEADLAMP TRIM RING 69624-99A

SCREAMIN’ EAGLE CHROME FORK BRACE 46265-02

CHROME LOWER TRIPLE TREE COVER 66021-00

CHROME FRONT CALIPER KIT 44395-00

CLASSIC CHROME FLOATING BRAKE ROTOR 44821-00 Front

44822-00 Rear DOMED BILLET STYLE MIRRORS

91519-99 MINI TACH KIT

67941-96B CLEAR TURN SIGNAL LENS KIT

69303-02 Bullet CHROME CLUTCH BRACKET AND

MASTER CYLINDER RESERVOIR KIT 45284-99

CHROME SWITCH HOUSING KIT 70222-96

2003 fxstd Colour Shop Select Paint, Ghost Flame—Bright Pearl White over White

CONTOURED CHROME AND RUBBER CUSTOM HAND GRIPS 56459-01

CHROME PUSHROD COVER KIT 18096-00

CHROME BILLET LIFTER COVERS 18088-02

SMOOTH CHROME BILLET HEEL RESTS FOR FORWARD CONTROLS 50262-01

CHROME FORWARD CONTROL BRACKETS 33920-00

SMOOTH CHROME BRAKE PEDAL PAD 42689-02 Small

SMOOTH CHROME SHIFTER PEG 43122-01

SMOOTH CHROME BILLET FOOTPEGS 43120-01 Large

43122-01 Small CHROME-PLATED SWINGARM FOR

SOFTAIL 48442-00

CHROME REAR CALIPER KIT 44414-01

CHROME SIX SPOKE SLOTTED SPROCKET 40447-01

SLIP-ON MUFFLERS, BALONEY CUT 80381-00 Shotgun Style

214 215

Fat bo

On the left, accessories from the 100th Anniversary Collection are combined with Softail Leather Saddlebags and a Fat Boy Double Bucket Seat for custom mile munching, while the Fat Boy on the right announces its custom presence with new Real Fire Radical Custom Paint, matching Flame Handgrips and Mirror Chrome ThunderStar Custom Wheels.

LEFT PAGE

NEW 100TH ANNIVERSARY BILLET COLLECTION 32113-03 Timer Cover

25001-03 Derby Cover

NEW 100TH ANNIVERSARY AIR CLEANER INSERT 29019-03

NEW RIGID CHROME SIDEPLATES 53378-03

DETACHABLE LOW-PROFILE WINDSHIELD 58651-97A Lightly Smoked

CHROME HEADLAMP NACELLE 67907-96

HEADLAMP TRIM RINGS 69627-99

HALOGEN FOG LAMP KIT 68247-98

PASSING LAMP TRIM RINGS 69622-99A

CHROME LOWER FORK SLIDERS 46482-00 Front

FAT BOY SLOTTED WHEEL 41022-00 Front

41017-00 Rear CHROME LOWER BELT GUARD

60316-00 FAT BOY DOUBLE BUCKET SEAT

51570-00 SMOOTH SHORT RAIL BACKREST PAD

52517-94 Smooth

SHORT RAIL UPRIGHT 52737-94A

SOFTAIL LEATHER SADDLEBAGS 92000-00A

RIGHT PAGE

NEW REAL FIRE RADICAL CUSTOM PAINT BLACK WITH BLUE FLAME 95710-03BFY

NEW FLAME HAND GRIPS 56518-02

NEW 100TH ANNIVERSARY BILLET AIR CLEANER INSERT 29797-02

2003 flstf/i Stock Production Paint, 100th Anniversary—Vivid Black

Colour Shop Radical Paint, Real Fire—Black with Blue Flame

SCREAMIN’ EAGLE EFI STAGE I KIT 29756-01

BILLET AIR CLEANER 29745-00

ENGINE/TRANSMISSION

—

COVERS 66508-00 Side

66510-00 Top CHROME UPPER FORK SLIDER

COVERS 45963-97

CHROME LOWER FORK SLIDERS 46482-00

MIRROR CHROME THUNDERSTAR CUSTOM WHEEL 43609-00 16" Front

43649-00 16" Rear LOW-PROFILE STITCHED SEAT

52436-02 Rider Pattern CHROME-PLATED SWINGARM FOR

SOFTAIL MODELS 48442-00

LAYBACK LICENCE PLATE MOUNT 59817-00A

PROFILE LOW SUSPENSION 54596-94 Front

54648-00 Rear

;

216

217

heritage Springer

Nostalgic 1930s Olive Green and Black Select Custom Paint brings out the history in this Heritage Springer, whose muted tones allow brilliant accessories like 100th Anniversary Derby and Timer Covers to shine through. Not a bike that likes to sit on a trailer, this custom vision boasts a deep-breathing Screamin’ Eagle Stage I Kit to enhance this “old-timer’s” performance.

NEW SELECT OLIVE GREEN AND BLACK 30’S STYLE NOSTALGIC CUSTOM PAINT 95711-03BFN

NEW 100TH ANNIVERSARY COVERS 32113-03 Tim er

25001-03 Derby NEW EFI FUEL FITTING COVER KIT

62883-02 NEW TURN SIGNAL RELOCATION KIT

90366-03 Rear NEW DOCKING HARDWARE KIT

53931-03 Rear, for Rack CLASSIC CHROME HEADLAMP VISOR

67750-88T CLASSIC CHROME PASSING LAMP VISORS

67783-78T

PASSING LAMP TRIM RINGS 68775-93T

CLEAR TURN SIGNAL LENSES 69303-02 Bullet Style

HERITAGE SPRINGER FRONT FENDER TIP 59218-97

CLASSIC CHROME BRAKE ROTOR 44821-00 Front

44822-00 Rear BULLSEYE CALIPER INSERT

44099-99 CLASSIC TEARDROP MIRRORS

91971-98 (pair)

NOSTALGIC HAND GRIPS 56275-96A

CHROME HAND CONTROL LEVER KIT 45075-96

CHROME SWITCH HOUSING KIT 70222-96

CHROME FRONT MASTER CYLINDER COVER 45078-96A

CHROME CLUTCH BRACKET AND MASTER CYLINDER RESERVOIR KIT 45284-99

HERITAGE SPRINGER LEATHER TANK PANEL WITH POUCH 61770-00

2003 flstsi Select Custom Paint, 30’s Style Olive and Black

FINNED HEADBOLT BRIDGE 43859-00 Black

RIDER FOOTBOARD ASSEMBLY—OLD STYLE 50599-89T (2 sets)

POLISHED STAINLESS STEEL SHIFT LINKAGE 33814-98A Roun d

NOSTALGIC SHIFTER PEGS 34627-99 (2)

NOSTALGIC BRAKE PEDAL PAD 44248-96

HERITAGE SPRINGER RIDER BACKREST PAD 52826-97 Low

SOFTAIL FRAME TRIM SET 47300-88T

BLACK SOFTAIL SWINGARM AXLE COVERS 47615-95B

CHROME SPROCKET COVER 91347-00

HERITAGE SPRINGER FENDER TIP 59895-97 Rear

PROFILE LOW SUSPENSION 54648-00 Rear

HERITAGE SPRINGER SOLO RACK 53903-00

218 219

Detachable King-Size Windshield The Softailfamily’s combination of timeless styling and uncompromising, road-ready design has no equal on the tarmac. Despite their “custom-out-of-

the-crate” appearance, the Softails are built with personalisation in mind. And Genuine Motor Parts and Accessories deliver options designed to enhance your Softail’s look and feel at every turn. Drop down with Profile Low Suspension for laid-back, custom swagger, and then keep the lines long and low with the sculpted curves and custom-stitched patterns of our Exotic Seat Collection. Continue with exclusive Softail accessories like our Chrome-Plated Swingarm, built to Original Equipment specifications for unparalleled fitment and function with a brilliant finish. Slip on a detachable windshield so you can reduce fatigue on long-distance runs without

having to sacrifice your custom profile for trips around town. Or give a nod to the past with a Chrome Passing Lamp Kit, and then add the final detail with a matching Chrome Headlamp Nacelle. With Genuine Motor Parts and Accessories, custom Softail looks are just moments away.

for FL Softail Models

Standard-Height, Smoked 57733-00, page 222 Low-Profile, Smoked 57734-00, page 222

Chrome Fork Cover Kit

67890-91a, page 294

Lighting Trim Rings

Headlamp 69626-99, page 230 Passing Lamp 69622-99a, page 230 Turn Signal 69740-01, page 230

Chrome-Plated Swingarm for Softail Models

48442-00, page 296

Profile Low Rear Suspension

54648-00a, page 327

Instant

Classic

Two-Up Custom Stitched Seat with Ostrich Insert

53207-02, page 233

220

Softail

Windshields

A. DETACHABLE SUPER SPORT WINDSHIELD FOR SOFTAIL DEUCE MODELS

Add to the ground-breaking style of the Deuce, while also protecting yourself from some of the elements. This windshield features a Super Sport shape and high-quality lightly smoked Lexan, along with polished stainless steel mounting brackets that offer detachable convenience. Patented.

57837-00A Fits ’00-later FXSTD models

B. DETACHABLE COMPACT STANDARD-HEIGHT WINDSHIELD FOR SOFTAIL DEUCE MODELS

These windshields, designed specifically for the Deuce, feature partially hidden mounting brackets, a unique U-shaped support and an engraved Bar & Shield emblem for a clean look. Patented.

57090-00A Clear.

C. DETACHABLE COMPACT LOW-PROFILE WINDSHIELD FOR SOFTAIL DEUCE MODELS

Detachable compact low-profile lightly smoked Lexan windshield. Mounting brackets designed to enhance clean style of the Deuce. Patented.

57824-00A Lightly Smoked.

(except FXSTDSE). Installation requires the separate purchase of Docking Hardware Kit P/N 58397-00. $234.95

Fits ’00-later FXSTD models (except FXSTDSE). Requires separate purchase of Docking Hardware Kit P/N 58397-00. $309.95

Fits ’00-later FXSTD models (except FXSTDSE). Requires separate purchase of Docking Hardware Kit P/N 58397-00. $299.95

SOFTAIL DEUCE DETACHABLE WINDSHIELD DOCKING HARDWARE

(not shown) (Patented)

58397-00 Required for installation

of detachable windshields on ’00-later FXSTD models (except FXSTDSE). $69.95

A. DETACHABLE SUPER SPORT WINDSHIELD FOR SOFTAIL DEUCE MODELS

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

B. DETACHABLE COMPACT

STANDARD-HEIGHT WINDSHIELD FOR SOFTAIL DEUCE MODELS

C. DETACHABLE COMPACT

LOW-PROFILE WINDSHIELD FOR SOFTAIL DEUCE MODELS

221

Softail

Windshields

D. DETACHABLE SUPER SPORT WINDSHIELD FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS

Super is an apt description for this do-it-all shield. Detachable convenience. Harley-Davidson sport styling. High-quality, lightly smoked Lexan that shields you from the elements. Patented.

57965-97A Fits ’84-later FXST, FXSTC,

DOCKING HARDWARE FOR DETACHABLE WINDSHIELDS (Patented)

For 41mm Forks.

58350-96 Required for installation

E. SPORT WINDSHIELD KIT FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS

Formed of Lexan polycarbonate and hard-coated to resist scratching. Lightly smoked with Bar & Shield Winged logo. Contoured to fit headlamp and incorporates adjustable four-point mounting. Functional styling helps deflect wind to reduce upper body fatigue.

91820-85A Fits ’84-later FXST, FXSTB,

FXSTB, ’93-later FXDWG, ’80-’86 FXWG. (Does not fit FXSTD.) Use Docking Hardware Kit P/N 58350-96. $204.95

of Detachable Windshields P/Ns 58340-96, 58341-96, 57965-97A, 58627-99. $69.95

FXSTC, and ’93-later FXDWG and ’86-earlier FXWG models. $149.95

D. DETACHABLE SUPER SPORT WINDSHIELD FOR

SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS

F. COMPACT WINDSHIELD KIT FOR SOFTAIL CUSTOM MODELS

Formed of tough Lexan polycarbonate and hard-coated to resist scratching. Unique mounting system utilizes die-cast fork slider clamps which are designed for height adjustment and are hand-polished and chrome-plated. Chrome windshield cross braces offer traditional Harley-Davidson styling. Mounts easily, can be quickly removed.

58025-91B Fits ’84-later FXST, FXSTC,

FXSTB and ’86-earlier FXWG models. (Does not fit FXDWG and FXSTD models.) Will not fit with Chrome Billet Mini Tach Mount P/N 68960-98. $284.95

E. SPORT WINDSHIELD KIT

FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS

F. COMPACT WINDSHIELD KIT

FOR SOFTAIL CUSTOM MODELS

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

222

Softail

Windshields

DETACHABLE COMPACT WINDSHIELD FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS

Get the convenience of detachables and the look of lightly smoked Lexan in one easy-to-install windshield. This windshield is formed from a hard-coated polycarbonate that resists scratching and abrasion. Because it is designed to work with detachable docking hardware, this windshield comes on or off in less than 60 seconds without tools. Patented.

A. Standard-Height, Lightly Smoked

58627-99 Fits ’84-later FXST, FXSTB,

B. Standard-Height, Clear

58340-96 Fits ’84-later FXST, FXSTC,

C. Low-Profile, Lightly Smoked

58341-96 Fits ’84-later FXST, FXSTC,

FXSTC and ’93-later FXDWG. Requires installation of Docking Hardware Kit P/N 58350-96. Will not fit with Chrome Billet Mini Tach Mount P/N 68960-98. $299.95

FXSTB, and ’93-later FXDWG, ’80-’86 FXWG. (Does not fit FXSTD.) Requires separate purchase of Windshield Docking Hardware Kit P/N 58350-96. Will not fit with Chrome Billet Mini Tach Mount P/N 68960-98. $279.95

DOCKING HARDWARE FOR DETACHABLE WINDSHIELDS (Patented)

For 41mm Forks.

58350-96 Required for installation

SOFTAIL DETACHABLE KING-SIZE WINDSHIELDS FOR USE WITH PASSING LAMPS

This one-piece Lexan windshield is formed from hardcoated polycarbonate material to resist scratching. The Lexan is attached to highly-polished stainless steel mounting brackets supported by moulded-rubber bushings for improved isolation. It is offered in a standard-height clear or lightly smoked, Lexan or three-inch lower than stock, low-profile lightly smoked Lexan. (Chrome Wind Deflector Kit P/N 58125-90A can be used with this windshield kit on ’99-earlier models.) Patented.

D. Three-inch, Low-Profile, Lightly Smoked

57734-00 Fits ’00-later FLSTC models.

58275-95

E. Standard-Height, Clear

58240-95 Fits ’86-’99 FLSTC and ’90-later

Standard-Height, Lightly Smoked (not shown)

57733-00 Fits ’00-later FLSTC models.

58628-99

of Detachable Windshields P/Ns 58340-96, 58341-96, 57965-97A, 58627-99. $69.95

(Additional mounting hardware not required.) $334.95

Fits ’86-’99 FLSTC and ’90-later FLSTF, FLSTN models with passing lamps. Includes mounting hardware. (Does not fit FLSTS.) $369.95

FLSTF, FLSTN models with passing lamps. Includes mounting hardware. (Stock on ’00 FLSTC.) (Does not fit FLSTS.) $339.95

(Additional mounting hardware not required.) $334.95

Fits ’86-’99 FLSTC and ’90-later FLSTF, FLSTN models with passing lamps. Includes mounting hardware. (Does not fit FLSTS.) $369.95

A. DETACHABLE COMPACT WINDSHIELD FOR SOFTAIL CUSTOM AND

DYNA WIDE GLIDE MODELS – STANDARD-HEIGHT, LIGHTLY SMOKED

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

B. DETACHABLE COMPACT WINDSHIELD FOR

SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS – STANDARD-HEIGHT, CLEAR

C. DETACHABLE COMPACT WINDSHIELD

FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS – LOW-PROFILE, LIGHTLY SMOKED

D. SOFTAIL DETACHABLE KING-SIZE WINDSHIELD KIT FOR USE WITH

PASSING LAMPS – THREE-INCH, LOW-PROFILE, LIGHTLY SMOKED

223

Softail

Windshields

F. DETACHABLE KING-SIZE WINDSHIELDS FOR FL SOFTAIL MODELS WITHOUT PASSING LAMPS

The Lexan windshield is formed from hard-coated polycarbonate material to resist scratching and abrasion. Polished stainless steel mounting brackets are supported by moulded-rubber bushings for improved isolation. It is offered in a standard-height clear Lexan or three-inch lower than stock, low-profile lightly smoked Lexan. Comes complete with all the hardware required to fit FLSTC, FLSTF and FLSTN models without passing lamps. (Chrome Wind Deflector Kit P/N 58125-90A can be used with this windshield kit on ’99-earlier models. Windshield will not fit with passing lamps.) Patented.

Standard-Height, Clear

58243-95 Fits ’86-’99 FLSTC, and ’90-later

Three-inch, Low-Profile, Lightly Smoked

58278-95 Fits ’86-’99 FLSTC, and ’90-later

REPLACEMENT WINDSHIELDS (not shown)

Change the look of your Heritage Softail Classic by replacing your clear windshield with the darker hue of lightly smoked Lexan, now in standard-height. Use your existing hardware for a quick and easy change.

Standard-Height, Lightly Smoked Replacement Lexan

57977-99 Fits ’86-later FLSTC, FLSTF,

Standard-Height, Lightly Smoked Replacement Lexan

57975-99 Fits ’86-later FLSTC, FLSTF,

Low-Profile, Lightly Smoked Replacement Lexan

58316-95A Fits ’86-later FLSTC, FLSTF,

Low-Profile, Lightly Smoked Replacement Lexan

(not shown)

58277-95 Fits ’86-later FLSTC, FLSTF,

FLSTF, FLSTN models without passing lamps. (Does not fit FLSTS.) $339.95

FLSTF, FLSTN models without passing lamps. (Does not fit FLSTS.) $364.95

FLSTN models equipped with permanently mounted King-Size Windshields. $144.95

(not shown)

FLSTN models equipped with a Detachable King-Size Windshield. (Does not fit FLSTS.) $149.95

FLSTN models equipped with a permanently mounted King-Size Windshield. (Does not fit FLSTS.) $134.95

FLSTN models equipped with a Detachable King-Size Windshield. (Does not fit FLSTS.) $144.95

E. SOFTAIL DETACHABLE KING-SIZE

WINDSHIELDS FOR USE WITH PASSING LAMPS – STANDARD-HEIGHT, CLEAR

F. DETACHABLE KING-SIZE WINDSHIELDS

FOR FL SOFTAIL MODELS WITHOUT PASSING LAMPS – STANDARD-HEIGHT, CLEAR

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

224

Softail

Windshields

DETACHABLE KING-SIZE NACELLE WINDSHIELD

Fits Softail models equipped with the Street Stalker Headlamp Nacelle or the Chrome Headlamp Nacelle Kit. Available for models with and without passing lamps. Patented.

A. Standard-Height, Clear

58649-97A Fits ’86-later FLSTC, FLSTF and

B. Low-Profile, Lightly Smoked

58651-97A Fits ’86-later FLSTC, FLSTF and

C. Standard-Height, Clear

58652-97A Fits without passing lamps. $359.95

Low-Profile, Lightly Smoked (not shown)

58653-97A Fits without passing lamps. $384.95

REPLACEMENT WINDSHIELDS (not shown)

Standard-Height, Clear Replacement Lexan

58657-97A Fits ’86-later FLSTC, FLSTF

Low-Profile, Lightly Smoked Replacement Lexan

58658-97A Fits ’86-later FLSTC, FLSTF

FLSTN models equipped with the Chrome Headlamp Nacelle Kit P/N 67907-96. Fits with passing lamps. $359.95

FLSTN models equipped with the Chrome Headlamp Nacelle Kit P/N 67907-96. Fits with passing lamps. $384.95

and FLSTN models equipped with the Chrome Headlamp Nacelle Kit P/N 67907-96. $134.95

and FLSTN models equipped with the Chrome Headlamp Nacelle Kit P/N 67907-96. $144.95

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

A. DETACHABLE KING-SIZE NACELLE WINDSHIELD – STANDARD-HEIGHT, CLEAR

B. DETACHABLE KING-SIZE

NACELLE WINDSHIELD – LOW-PROFILE, LIGHTLY SMOKED

C. DETACHABLE KING-SIZE

NACELLE WINDSHIELD – STANDARD-HEIGHT, CLEAR

Upper Position

Lower Position

NEW

225

Softail

Windshields

D. ADJUSTABLE HEIGHT WINDSHIELD FOR FL SOFTAIL MODELS

This two-piece detachable windshield allows you to tailor the screen height for maximum riding comfort. The simple cam-lever adjustment permits the clear upper section to be raised from 17" to 20" (measured from the headlamp cut-out) to provide maximum weather protection and visability. The dark-tinted lower section conceals the adjustment feature, and small raised dots provide vibration isolation. Patent pending.

57704-02 Fits ’00-later FLSTC models.

57703-02

KING-SIZE WINDSHIELDS – RIGID MOUNT

The Lexan windshield is formed from hard-coated, lightly smoked polycarbonate material to resist scratching and abrasion. The windshield comes with mounting brackets that are adjustable for various height settings and is a direct replacement for FLSTC models. This windshield can also be installed on FLSTF and FLSTN models with the addition of mounting bracket kit P/N 58155-90.

E. Low-Profile, Lightly Smoked

58319-95A Fits ’86-’99 FLSTC, and ’90-later

F. Standard-Height, Clear

58018-86A Fits ’86-’99 FLSTC, and ’90-later

FLSTF/FLSTN Windshield Bracket Kit

(not shown)

Includes brackets, chrome acorn lock nuts, and installation instructions.

58155-90 Required to install King-Size

Mounts using Original Equipment windshield docking hardware. $419.95

Fits ’86-’99 FLSTC, ’90-later FLSTF and FLSTN models equipped with passing lamps. Includes required docking hardware. $454.95

FLSTF, FLSTN models (FLSTF and FLSTN require mounting bracket kit P/N 58155-90). (Does not fit FLSTS.) $289.95

FLSTF, FLSTN models (FLSTF and FLSTN require mounting bracket kit P/N 58155-90). (Does not fit FLSTS.) $259.95

Lexan Windshield Kit P/N 58018-86 on ’90-later FLSTF and FLSTN models. $13.95

D. ADJUSTABLE HEIGHT WINDSHIELD FOR FL SOFTAIL MODELS

E. KING-SIZE RIGID MOUNT WINDSHIELDS –

LOW-PROFILE, LIGHTLY SMOKED

F. KING-SIZE RIGID MOUNT WINDSHIELDS –

STANDARD-HEIGHT, CLEAR

RIGID-MOUNTED REPLACEMENT LEXAN

Standard-Height, Clear

58516-97 Fit ’86-later FLSTF, FLSTN and

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

’86-’99 FLSTC models equipped with the Chrome Headlamp Nacelle Kit P/N 67907-96. $134.95

226

Softail

Windshields

A. DETACHABLE SUPER SPORT WINDSHIELD FOR FX SPRINGER SOFTAIL MODELS

Super is an apt description for this do-it-all shield. Detachable convenience. Harley-Davidson sport styling. High-quality, lightly smoked Lexan that shields you from the elements. Patented.

57969-97A Fits ’93-later FXSTS, FXSTSB

B. COTTON WINDSHIELD STORAGE BAG

This bag is constructed of breathable cotton material and is flannel-lined for a scratch-free storage area. The outside of the bag features an embroidered Bar & Shield logo to match the cotton cycle covers.

95982-98 Fits all Harley-Davidson

C. SPRINGER SPORT WINDSHIELD KIT

Formed of Lexan polycarbonate and hard-coated to resist scratches. Lightly smoked with Bar & Shield Winged logo and contoured to complement the Springer front fork styling. Four-point adjustable mounting system. Designed to fit with or without Springer Passing Lamp Kit P/N 68253-88A and Springer Horn Kit P/N 69036-88A.

58029-89B Fits ’88-later FXSTS models and

models. Use Docking Hardware Kit P/N 58907-96. Will not fit with Chrome Billet Mini Tach Mount P/N 67848-00. $204.95

windshields. $64.95

Softail models equipped with Springer Front End Kit P/N 46007-88A. (Does not fit FLSTS models.) $149.95

DOCKING HARDWARE FOR DETACHABLE WINDSHIELDS

(not shown) (Patented)

58907-96 Required for installation of

58350-96

Detachable Windshields on ’93-later FXSTS, FXSTSB and ’97-later FLSTS models. $69.95

Required for installation of Detachable Windshields P/Ns 58340-96, 58341-96, 57965-97A, 58627-99. $69.95

A. DETACHABLE SUPER SPORT WINDSHIELD FOR FX SPRINGER SOFTAIL MODELS

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

B. COTTON WINDSHIELD STORAGE BAG

C. SPRINGER SPORT WINDSHIELD KIT

227

Softail

Windshields

COMPACT DETACHABLE WINDSHIELD FOR SPRINGER SOFTAIL MODELS (Patented)

D. Standard-Height, Clear

58770-96 Fits ’93-later FXSTS and FXSTSB;

E. Low-Profile, Lightly Smoked

58771-96 Fits ’93-later FXSTS and FXSTSB;

F. COMPACT WINDSHIELD KIT FOR SPRINGER SOFTAIL MODELS

Formed of Lexan polycarbonate and hard-coated to resist scratches. Features chrome mounting brackets. Adjustable to various height settings. Designed to fit with or without Springer Passing Lamp Kit P/N 6825388A and Springer Horn Kit P/N 69036-88A.

58044-88C Fits ’88-later FXSTS models.

’97-later FLSTS models. Installation requires the separate purchase of Windshield Docking Hardware Kit P/N 58907-96. (Will fit with or without passing lamps.) Will not fit with Chrome Billet Mini Tach Mount P/N 67848-00. $294.95

Also fits Softail models equipped with Springer Front End Kit P/N 46007-88A. (Does not fit FLSTS models.) $294.95

D. COMPACT DETACHABLE WINDSHIELD FOR SPRINGER

SOFTAIL MODELS – STANDARD-HEIGHT, CLEAR

E. COMPACT DETACHABLE WINDSHIELD

FOR SPRINGER SOFTAIL MODELS – LOW-PROFILE, LIGHTLY SMOKED

F. COMPACT WINDSHIELD KIT FOR

SPRINGER SOFTAIL MODELS

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

228

Softail

Windshields

HERITAGE SPRINGER KING-SIZE DETACHABLE WINDSHIELD (Patented)

A. Standard-Height, Clear

58772-97 Fits ’97-later FLSTS models.

B. Low-Profile, Lightly Smoked

58783-97 Fits ’97-later FLSTS models.

C. HERITAGE SPRINGER KING-SIZE WINDSHIELDS

This one-piece, classic King-Size windshield completes the nostalgic look. Includes chrome-plated steel mounting brackets.

Standard-Height, Clear

58533-97A Fits ’97-later FLSTS

Low-Profile, Lightly Smoked

58534-97A Fits ’97-later FLSTS

Installation requires the separate purchase of Windshield Docking Hardware Kit P/N 58907-96. Will not fit with Chrome Billet Mini Tach Mount P/N 67848-00. $299.95

Installation requires separate purchase of Windshield Docking Hardware Kit P/N 58907-96. Will not fit with Chrome Billet Mini Tach Mount P/N 67848-00. $324.95

Heritage Springer. $299.95

Heritage Springer. $324.95

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

A. HERITAGE SPRINGER KING-SIZE DETACHABLE WINDSHIELD – STANDARD-HEIGHT, CLEAR

B. HERITAGE SPRINGER KING-SIZE

DETACHABLE WINDSHIELD – LOW-PROFILE, LIGHTLY SMOKED

C. HERITAGE SPRINGER

KING-SIZE WINDSHIELDS – STANDARD-HEIGHT, CLEAR

NEW

229

Softail

Headlamp Visor Kits

D. COLOUR-MATCHED HEADLAMP VISOR KITS (DYNA WIDE GLIDE/SOFTAIL CUSTOM)*

Add an element of racy style to stock headlamps with these visors, available in prime or high-quality, colourmatched Harley-Davidson paint.

Fits ’84-’99 FXST, FXSTC and ’91-later FXDWG.

*NOTE: This product is a “paint to order” accessory. Please allow an average of 5 weeks delivery for this item.

Refer to the Colour Shop section for a complete listing of colour options.

E. CHROME HEADLAMP VISOR KIT

Add an element of racy style to stock headlamps with these visors. Kit includes necessary mounting hardware.

69728-01 Fits ’91-later FXDWG models

and ’84-’99 FXST and FXSTC models (except FXSTB). $174.95

D. COLOUR-MATCHED HEADLAMP VISOR KITS (DYNA WIDE GLIDE/SOFTAIL CUSTOM)

NEW

D. COLOUR-MATCHED HEADLAMP

VISOR KITS (DYNA WIDE GLIDE/ SOFTAIL CUSTOM)

E. CHROME HEADLAMP VISOR KIT

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

230

Softail

Trim Rings

A. HEADLAMP TRIM RINGS

This chrome-plated headlamp trim ring extends forward, giving the headlamp assembly a “Frenched” look reminiscent of classic hot rod car designs by recessing the headlamp and adding the appearance of depth. Functions as a direct replacement for the Original Equipment trim ring, except when used with P/N 69627-99, where it easily installs over the Original Equipment trim ring. Patented. (Does not fit with Accessory Headlamp Visor or Passing Lamp Visor.)

69627-99 Fits ’83-later Touring models

69626-99

69623-99A

69624-99A

PASSING LAMP TRIM RINGS

A must-have complement to the Headlamp Trim Ring, these chrome-plated passing lamp trim rings provide the same “Frenched” look for passing lamps. Function as a direct replacement for the Original Equipment trim rings. Includes chrome hardware. Sold in pairs. Patented.

69622-99A Fits all ’62-later models with passing

(except Tour Glide and Road Glide). Fits ’94-later FLHR models and ’86-later FLST models with accessory Chrome Headlight Nacelle P/N 67907-96. $32.95

Fits ’94-later FLSTC, FLSTF and FLSTN models. (not shown) $32.95

Fits ’94-later FXST, FXSTB, FXSTC, FXLR and Dyna models. $28.95

Fits ’93-later FXSTS, ’95-’97 FXSTSB, ’96-later XL 1200C, XL 883C, ’99 FXR models and ’97-later FLSTS models. Also fits FXSTD models. $28.95

lamps. Fits accessory Passing Lamps Kit P/N 68250-80. (pair) $39.95

After

TURN SIGNAL TRIM RING KIT

Complete the “Frenched” look with these Turn Signal Trim Rings. The chrome-plated trim rings match the styling of Headlamp and Passing Lamp Trim Rings 69622-99A, 69626-99, and 69627-99. Easy to install, the kit includes two trim rings.

69740-01 Fits front or rear of ’88-later

Touring and Heritage Softail Classic models, and Softail models equipped with Turn Signal Relocation Kit P/N 68413-99 or 68412-99. $35.95

Before

A. HEADLAMP, PASSING LAMP AND TURN SIGNAL TRIM RINGS – ROAD KING AND FL SOFTAIL

Before

After

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

FXSTC BEFORE HEADLAMP TRIM RING

FXSTC AFTER HEADLAMP TRIM RING

Before

After

231

Softail

Trim Rings

BULLET TURN SIGNAL TRIM RING KIT

Trim ring contour matches the turn signal housing and extends out past the lens for a sleek appearance. These easy-to-install chrome-plated trim rings with amber or red lenses look great alone, or in combination with Headlamp Trim Rings. Sold in pairs. From the workshop of Wyatt Fuller.

B. Amber

69739-01 Fits all models equipped with

C. Red

69736-02 Fits rear of all models (except

bullet style turn signals (except VRSC rear signals and rear of models with Auxiliary Turn Signal Brake Light Kits P/N 68216-00 and 91698-02). $29.95

VRSC and International models) equipped with bullet style turn signals and Auxiliary Brake light Kit P/N 68216-00 or 91698-02. Not for International use. $29.95

FLSTS AFTER HEADLAMP TRIM RING AND PASSING LAMP TRIM RINGS

B. BULLET TURN SIGNAL

TRIM RING KIT – AMBER

C. BULLET TURN SIGNAL TRIM RING KIT – RED

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

exotic Seats

The very latest from the Harley-Davidson Exotic Seat Collection, these limited production Custom Stitched saddles combine superior construction with radical styling to give you the ultimate custom accessory. With contoured foam padding for added longhaul comfort, each seat is made from top grain

leathers for superior wear and attitude with age. Decorative custom-stitching and available ostrich leather inserts leave no doubt about your attention to custom detail. Seat pans are constructed from hand-laid fibreglass for extra durability, and carpeted to protect your paint finish. When it’s time to flex your custom muscles, the Harley-Davidson Exotic Seat Collection has the style you’re after.

Rider Pattern

Axe Pattern

Scorpion Pattern

Sweep Pattern

Icarus Pattern

with Ostrich

Fire Pattern

with Ostrich

Axe II Pattern

Turbulence Pattern

Scimitar Pattern

Menace Pattern

A. SOLO OSTRICH SEAT FOR SOFTAIL MODELS – ICARUS PATTERN

NEW

233

Softail

Ostrich Seats

A. SOLO OSTRICH SEAT FOR SOFTAIL MODELS

Ride low-down in high style on this limited-production custom solo seat. Made from the highest quality materials, this custom stitched seat features a natural ostrich skin insert, cowhide seating surface, and contoured foam padding for long-haul comfort. Seat has no visible mounting hardware for a clean custom look. Seat width: 12".

Ostrich Seat – Fire Pattern

51252-02 Fits ’00-later FXSTD

51260-02

Ostrich Seat – Icarus Pattern

53262-02 Fits ’00-later Softail models (except

52082-02 Fits ’00-later FXSTD models. $469.00

B. LOW-PROFILE OSTRICH SEAT FOR SOFTAIL MODELS*

The ultimate seat profile for your slammed ride, this low-profile limited-production seat hugs the frame and fender for a long and lean look. Crafted from premium cowhide and natural ostrich leathers, this premiere seat is constructed with a hand-laid fiberglass shell and high density padding for superior wear. Seat width: 13". Pillion width: 5".

Ostrich Seat – Fire Pattern

51251-02 Fits ’00-later FXSTD

51259-02

Ostrich Seat – Icarus Pattern

53253-02 Fits

52074-02

models (shown). $469.00 Fits ’00-later Softail models

(except FXSTD and FLSTS). $469.00

FXSTD and FLSTS models). $469.00

models. Does not fit with Sissy Bar Upright P/N 51114-00 or 51144-02. $499.00

Fits ’00-later Softail models (except FXSTD and FLSTS) (shown). $499.00

’00-later Softail

models (except FXSTD and FLSTS models). $499.00

Fits ’00-later FXSTD models (Does not fit with Sissy Bar Upright P/Ns 51114-00 and 51144-02). $499.00

B. LOW-PROFILE OSTRICH SEAT FOR SOFTAIL MODELS – ICARUS PATTERN

C. TWO-UP OSTRICH SEAT FOR SOFTAIL MODELS – FIRE PATTERN

NEW

C. TWO-UP OSTRICH SEAT FOR SOFTAIL MODELS*

The two-up profile of this limited-production custom seat maintains a lean look, but adds back support for the rider, and additional padding for the passenger. Made of the highest quality cowhide, and featuring a one-of-a-kind genuine ostrich insert, this premium seat offers a radical style with a touch of comfort. Seat width: 13". Pillion width: 6".

Ostrich Seat – Fire Pattern

51250-02 Fits ’00-later FXSTD models. $499.00 51258-02

Ostrich Seat – Icarus Pattern

53207-02 Fits

52049-02 Fits ’00-later FXSTD models. $499.00

*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.

NOTE: These seats are “made to order” please allow 1 – 2 weeks for delivery.

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

Fits ’00-later Softail models (except FXSTD and FLSTS) (shown). $499.00

’00-later Softail

models (except FXSTD and FLSTS models). $499.00

234

Softail

Exotic Seats

A. SOFTAIL TWO-UP EXOTIC OSTRICH SEAT WITH CUSTOM PILLION

Combine the long and lean styling of our low-profile exotic seat with the back support of the two-up seat, and you get the best of both worlds. These cowhide saddles feature ostrich inserts, custom-stitched surfaces and a tapered pillion for style, and a rider position designed for comfort. Seat width: 13”. Pillion width: 5”.

Icarus Pattern

53534-02 Fits ’00-later Softail models (except

B. COLOUR-MATCHED TAIL SECTION FOR SOFTAIL DEUCE MODELS

Add a splash of colour behind your Deuce model’s Solo Seat while hiding the rear fender’s Sissy Bar Upright mounting holes with these exclusive colourmatched Tail Sections.

Fits ’00-later FXSTD models equipped with any GMA Solo Seat for FXSTD models.

FXSTD and FLSTS models). $499.00

NEW

Refer to page 249 for a complete listing of colour options.

C. SOLO CUSTOM STITCHED SEAT FOR SOFTAIL MODELS

When it’s time to go it alone, go solo in style. These premium quality cowhide leather saddles are highlighted

with custom stitched patterns to create a subtle and distinctive look, and feature “invisible” mounting hardware for a clean appearance. Seat width: 12".

Deuce

Fits ’00-later FXSTD models.

51060-02 Axe Pattern. $349.00 51061-02 Rider Pattern. $349.00 51062-02 Scorpion Pattern. $349.00 51063-02 Sweep Pattern. $349.00 52078-02 Axe II Pattern. $349.00 52079-02 Turbulence Pattern. $349.00 52080-02 Menace Pattern. $349.00 52081-02 Scimitar Pattern. $349.00 53292-02 Plain. $319.00

Softail

Fits ’00-later Softail models (except FXSTD and FLSTS).

51076-02 Axe Pattern. $349.00 51077-02 Rider Pattern. $349.00 51078-02 Scorpion Pattern. $349.00 51079-02 Sweep Pattern. $349.00 53254-02 Axe II Pattern. $349.00 53256-02 Turbulence Pattern. $349.00 53257-02 Menace Pattern. $349.00 53259-02 Scimitar Pattern. $349.00 53359-02 Plain. $319.00

D. LOW-PROFILE CUSTOM STITCHED SEATS FOR SOFTAIL MODELS*

Another extraordinary installment from the Exotic Seat Collection, these leather Low-Profile saddles feature custom stitched patterns and smooth lines to create a subtle and distinctive custom effect. Or go with a smooth cover for that simple custom look. Seat width: 13". Pillion width: 5".

Deuce

Fits ’00-later FXSTD models. Does not fit with Sissy Bar Upright P/N 51114-00 or 51144-02.

52365-02 Axe Pattern. $369.00 52368-02 Sweep Pattern. $369.00 52366-02 Rider Pattern. $369.00 52367-02 Scorpion Pattern. $369.00 52055-02 Axe II Pattern. $369.00 52056-02 Turbulence Pattern. $369.00 52057-02 Menace Pattern. $369.00 52058-02 Scimitar Pattern. $369.00 53289-02 Plain. $339.00

(

continued at top of next page)

*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.

A. SOFTAIL TWO-UP EXOTIC OSTRICH SEAT WITH CUSTOM PILLION – ICARUS PATTERN

B. COLOUR-MATCHED TAIL SECTION FOR SOFTAIL DEUCE MODELS

NEW

C. SOLO CUSTOM STITCHED SEAT FOR SOFTAIL MODELS – SCIMITAR PATTERN

D. LOW-PROFILE CUSTOM STITCHED SEATS FOR SOFTAIL MODELS – PLAIN

E. TWO-UP CUSTOM STITCHED SEAT FOR SOFTAIL MODELS – AXE PATTERN

NEW

235

Softail

Custom Stitched Seats

(

continued from bottom of previous page)

Softail

Fits ’00-later Softail models (except FXSTD and FLSTS).

52423-02 Axe Pattern. $369.00 52458-02 Sweep Pattern. $369.00 52436-02 Rider Pattern. $369.00 52457-02 Scorpion Pattern. $369.00 53208-02 Axe II Pattern. $369.00 53224-02 Turbulence Pattern. $369.00 53226-02 Menace Pattern. $369.00 53227-02 Scimitar Pattern. $369.00 53367-02 Plain. $339.00

E. TWO-UP CUSTOM STITCHED SEAT FOR SOFTAIL MODELS*

Share your custom ride. The two-up design of these premium cowhide leather seats offers a frame hugging look, but adds back support for the rider, and additional padding for the passenger. The custom stitched design on the seating surface, and the hand-laid fiberglass seat base show attention to detail second to none. Or go with a smooth cover for that simple custom look. Seat width: 13". Pillion width: 6".

Deuce

Fits ’00-later FXSTD models.

51064-02 Axe Pattern. $369.00 51065-02 Rider Pattern. $369.00 51066-02 Scorpion Pattern. $369.00 51067-02 Sweep Pattern. $369.00 52019-02 Axe II Pattern. $369.00 52021-02 Turbulence Pattern. $369.00 52029-02 Menace Pattern. $369.00 52040-02 Scimitar Pattern. $369.00 53288-02 Plain. $339.00

Softail

Fits ’00-later Softail models (except FXSTD and FLSTS models).

51080-02 Axe Pattern. $369.00 51081-02 Rider Pattern. $369.00 51082-02 Scorpion Pattern. $369.00 51083-02 Sweep Pattern. $369.00 53160-02 Axe II Pattern. $369.00 53161-02 Turbulence Pattern. $369.00 53162-02 Menace Pattern. $369.00 53192-02 Scimitar Pattern. $369.00 53368-02 Plain. $339.00

F. TWO-UP STITCHED SEAT WITH CUSTOM PILLION FOR SOFTAIL MODELS*

Combine the long and lean styling of our low-profile exotic seat with the back support of the two-up seat, and you get the best of both worlds. These cowhide saddles feature custom stitched surfaces and a sleek tapered pillion for style, and a rider position designed for comfort. Or go with a smooth cover for that simple custom look. Seat width: 13". Pillion width: 5".

Softail

Fits ’00-later Softail models (except FXSTD and FLSTS).

51285-02 Axe Pattern. $369.00 51286-02 Rider Pattern. $369.00 51287-02 Scorpion Pattern. $369.00 51288-02 Sweep Pattern. $369.00 52013-02 Axe II Pattern. $369.00 53390-02 Turbulence Pattern. $369.00 53401-02 Menace Pattern. $369.00 53402-02 Scimitar Pattern. $369.00 53403-02 Plain. $339.00

F. TWO-UP STITCHED SEAT WITH CUSTOM PILLION FOR SOFTAIL MODELS – SWEEP PATTERN

*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.

NOTE: These seats are “made to order” please allow 1 – 2 weeks for delivery.

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

236

Softail

Custom Seats

A. SOFTAIL LEATHER BADLANDER SEATS*

It’s the traditional Badlander seat style enhanced with supple top-grain leather. Includes leather care product, seat, grab strap and mounting hardware. Seat width 12.0"; Passenger Pillion width 6.5".

52361-00 Fits all ’00-later Softail

52361-97

NOTE: These Harley-Davidson seats are made of leather. Fine leathers or other natural materials WILL gain “character,” such as wrinkles or wear, with age. This is normal. A fine, aged patina and character wrinkles are a sign of the extremely high quality materials used to construct your seat or backrest. The appearance of scars or marks on the leather are a result of using natural leather panels and should not be thought of as an imperfection. Please use HarleyDavidson Leather Dressing P/N 98261-91V to protect your investment.

B. SOFTAIL BADLANDER SEAT*

Clean smooth covers, subtle top-stitching, and two embroidered “Harley-Davidson” logos add up to a statement only Harley could create. The low, lean look also offers the benefit of a reduced seat height, ideal for riders wanting the lowest possible seat height. Includes a passenger grab strap, integrated chrome rear mounting bracket, seat mounting screw, and installation instructions. Seat width 11.5"; passenger pillion width 5.5".

52292-00 Fits all ’00-later Softail

52292-94B

models (except FLSTS and FXSTD). (shown) $239.95

Fits all ’84-’99 Softail models (except FLSTS). (inset) $234.95

models (except FLSTS and FXSTD).(shown) $199.95

Fits all ’84-’99 Softail models (except FLSTS). $199.95

A. SOFTAIL LEATHER BADLANDER SEAT

C. SOFTAIL CUSTOM SEAT* WITH SNAKESKIN PRINT

Sleek and low style. The Bar & Shield logo adds the finishing touch! Seat width 11.5", passenger pillion width 5.0".

51910-00 Fits all ’00-later

Softail models (except FLSTS and FXSTD). $229.95

B. SOFTAIL BADLANDER SEAT

*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

C. SOFTAIL CUSTOM SEAT WITH SNAKESKIN PRINT

D. LEATHER BADLANDER SEAT FOR SOFTAIL DEUCE

237

Softail

Leather Seats

D. LEATHER BADLANDER SEAT* FOR SOFTAIL DEUCE

Accentuate the sleek lines of your Softail Deuce with the low look of the Badlander Seat. Enhanced with supple top grain leather and a new embroidered Bar & Shield logo, this complete package includes leather care product, seat, and grab strap. Seat width 12.0"; Passenger Pillion width 6.5".

51548-01 Fits ’00-later FXSTD models. $269.95

E. BADLANDER SEAT FOR SOFTAIL DEUCE*

The Badlander has built its reputation as a true street custom and now it’s available for the Deuce. Clean smooth covers, subtle top-stitching, and two embroidered “Harley-Davidson” logos add up to a statement only Harley-Davidson could create. The low, lean look also offers the benefit of a reduced seat height, ideal for riders wanting the lowest possible ride. Includes all necessary mounting hardware. Seat width is 12.0"; passenger pillion width is 6.5".

52461-00 Fits ’00-later FXSTD models. $199.95

F. SNAKESKIN SEAT* FOR SOFTAIL DEUCE MODELS

As if the sleek and low style of this seat didn’t get you close enough to the ground, the simulated snakeskin print lets you slither down the street with even more custom style. Designed for the Deuce, the seat includes all necessary mounting hardware. Seat width is 12.0"; passenger pillion width is 7.0".

52463-00 Fits ’00-later FXSTD models. $229.95

E. BADLANDER SEAT FOR SOFTAIL DEUCE

F. SNAKESKIN SEAT FOR SOFTAIL DEUCE MODELS

*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

238

Softail

Seats with Backrests

SOFTAIL SEATS WITH RIDER BACKRESTS

These seats are the most adjustable of their kind on the market. A patented design, integrated fuel spring makes the backrest angle inﬁnitely adjustable through a 30-degree range with the touch of a concealed, integrated, yet easy-toreach lever. The backrest removes easily and has a push-button-activated, ﬁve-position, 1.5" height adjustment. Rider Backrest folds down to allow easier passenger mounting. These seats are designed to match the styling of either the Heritage Softail Classic, Fat Boy, Heritage Springer or FX Softail, and include seat, rider backrest, passenger grab strap and mounting hardware.

A. HERITAGE SOFTAIL CLASSIC SEAT* WITH RIDER BACKRESTS

These seats add miles to the ride with added back support and foam density. Includes chrome spots and a new concho to match your Heritage Softail Classic bags. Seat width 15.0", passenger pillion width 11.5".

51562-00 Fits all ’00-later Softail models

Shown with:

HERITAGE SOFTAIL CLASSIC BUCKET PASSENGER BACKREST PAD

The bucket backrest pad is taller and wider than the stock pad. The foam contours to the lower back to provide added comfort for those long rides. Features chrome spots and includes all mounting hardware.

52348-97 Fits FLSTC and FXSTC models with

B. FAT BOY SEAT* WITH RIDER BACKREST

These seats add miles to the ride with added back support and foam density. Fat Boy logo adds the finishing touch! Seat width 15.0", passenger pillion width

11.5".

51560-00 Fits all ’00-later Softail models

Shown with:

FAT BOY BUCKET BACKREST PAD

This bucket backrest pad is taller and wider; the foam contours to the back for added comfort on those long hauls.

52347-97 Fits FLSTF models with separate

(except FLSTS and FXSTD). (Does not fit with Luggage Rack P/Ns 53465-87B or 53831-00). $559.95

stock Sissy Bar upright and all other Softail models equipped with Low Sissy Bar Upright. $95.95

(except FLSTS and FXSTD models). (Does not fit with Luggage Rack P/Ns 53465-87B or 53831-00.) Matches Backrest Pad P/N 52347-97 $559.95

purchase of Low Sissy Bar Upright. Also fits FLSTC and FXSTC models with stock Sissy Bar Uprights. $95.95

A. HERITAGE SOFTAIL CLASSIC SEAT WITH RIDER BACKREST

Press push-button in the centre of backrest pad to adjust vertically to five different heights.

BACKREST HEIGHT

Pull tab on side of seat to adjust angle of backrest pad 30˚ forward or backward.

*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

BACKREST ANGLE

B. FAT BOY SEAT WITH RIDER BACKREST

C. HERITAGE SPRINGER SEAT WITH RIDER BACKREST

239

Softail

Seats with Backrests

C. HERITAGE SPRINGER SEAT* WITH RIDER BACKREST

These seats add miles to the ride with added back support and foam density. Seat width 15.0", passenger pillion width 11.5".

51564-00 With Black Trim.

Shown with:

HERITAGE SPRINGER BUCKET PASSENGER BACKREST PAD

Features large bucket shape, with a generous radius and ample padding. This backrest pad offers extra comfort for your passenger.

51132-98 Fits Softail models (except

D. FX SOFTAIL SEAT* WITH RIDER BACKREST

These seats with embroidered logo add miles to the ride with added back support and foam density. Seat width

15.0", passenger pillion width 11.5".

51566-00 Fits all ’00-later Softail models

Shown with:

HERITAGE SPRINGER BUCKET PASSENGER BACKREST PAD

Features large bucket shape, with a generous radius and ample padding. This backrest pad offers extra comfort for your passenger.

51132-98 Fits Softail models (except

Also available:

FX SOFTAIL BUCKET BACKREST PAD

This backrest features a contoured back support area for greater passenger comfort.

51130-98 Fits all low and tall medallion

Fits all ’00-later Softail models (except FXSTD models). (Does not fit with Luggage Rack P/Ns 53465-87B or 53831-00). $629.95

FXSTD) equipped with Low Sissy Bar Upright. $79.95

(except FLSTS and FXSTD). (Does not fit with Luggage Rack P/Ns 53465-87B or 53831-00). Matches Backrest Pad P/N 51132-98 $559.95

FXSTD) equipped with Low Sissy Bar Upright. $79.95

Sissy Bar uprights. (Does not fit Mini Sissy Bar Upright.) $79.95

D. FX SOFTAIL SEAT WITH RIDER BACKREST

*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

240

Softail

Sundowner Bucket Seats

SOFTAIL SUNDOWNER DEEP BUCKET SEAT

The ultimate combination of style and comfort, these wide double bucket seats are designed to cradle you and your passenger. Carefully shaped for maximum lower back support, the rider seating area has a recessed surface for extra comfort on long rides. The entire seat is constructed with high density foam, for long-term shape retention, and specially designed surface materials that are tested to withstand rider abrasion and harsh weather. The seat pan and hardware are made from the same high quality components as HarleyDavidson stock seats, ensuring perfect ﬁtment and durability. Designed to match the styling of either the Heritage Softail Classic, Fat Boy, Heritage Springer or FX Softail.

A. HERITAGE SOFTAIL CLASSIC SUNDOWNER DEEP BUCKET SEAT*

This seat has double buckets for you and your passenger. Seat includes chrome spots to match your Heritage Softail Classic. Seat width 15.0", passenger pillion width 12.0".

51572-00 Fits all ’00-later Softail models

Also available:

HERITAGE SOFTAIL CLASSIC BUCKET PASSENGER BACKREST PAD

52348-97 Fits FLSTC and FXSTC models

(except FLSTS and FXSTD). (Does not fit with Luggage Rack P/Ns 53465-87B or 53831-00.) $259.95

with stock Sissy Bar upright and all other Softail models equipped with Low Sissy Bar Upright. $95.95

A. HERITAGE SOFTAIL CLASSIC SUNDOWNER DEEP BUCKET SEAT

B. FAT BOY SUNDOWNER DEEP BUCKET SEAT*

This seat has double buckets for you and your passenger. Seat includes an embroidered logo to match your Fat Boy. Seat width 15.0", passenger pillion width 12.0".

51570-00 Fits all ’00-later Softail models

Shown with:

HERITAGE SPRINGER BUCKET PASSENGER BACKREST PAD

Features large bucket shape, with a generous radius and ample padding. This backrest pad offers extra comfort for your passenger.

51132-98 Fits Softail models (except

(except FLSTS and FXSTD). (Does not fit with Luggage Rack P/Ns 53465-87B or 53831-00.) $264.95

FXSTD) equipped with Low Sissy Bar Upright. $79.95

*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

B. FAT BOY SUNDOWNER DEEP BUCKET SEAT

C. HERITAGE SPRINGER SUNDOWNER DEEP BUCKET SEAT

241

Softail

Sundowner Bucket Seats

C. HERITAGE SPRINGER SUNDOWNER DEEP BUCKET SEAT

This seat has double buckets for you and your passenger. Seat includes matching concho and valance with fringe to complement the look of your FLSTS.

51574-00 With Black Trim.

Shown with:

HERITAGE SPRINGER BUCKET PASSENGER BACKREST PAD

Features large bucket shape, with a generous radius and ample padding. This backrest pad offers extra comfort for your passenger.

51132-98 Fits Softail models (except

D. FX SOFTAIL SUNDOWNER DEEP BUCKET SEAT*

This FX style bucket seat offers you and your passenger Softail style and added comfort for longer rides.

51576-00 Fits all ’00-later Softail models

Shown with:

FX SOFTAIL BUCKET BACKREST PAD

This backrest features a contoured back support area for greater passenger comfort.

51130-98 Fits all low and tall medallion

Fits ’00-later FLSTS models. (Does not fit with FXSTD.) (Does not fit with Luggage Rack P/Ns 53465-87B or 53831-00.) Seat width 15.0", passenger pillion width 12.0". $349.95

FXSTD) equipped with Low Sissy Bar Upright P/N 52735-85 or 53004-98. $79.95

(except FLSTS and FXSTD). Seat width 15.0", passenger pillion width 12.0". $239.95

Sissy Bar uprights. (Does not fit Mini Sissy Bar Upright.) $79.95

D. FX SOFTAIL SUNDOWNER DEEP BUCKET SEAT

*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

242

Softail

Two-Up Seats

A. SUNDOWNER TOURING SEAT* FOR SOFTAIL DEUCE MODELS

When you’ve got the style of a Softail Deuce, you want to take on the road as much as possible. This Sundowner seat gives you added touring comfort without sacrificing the Deuce style that has heads turning. A wide and deep rider bucket allows for lower back support and comfort for the long haul and the wide passenger pillion allows your passenger to be comfortable as well. Styled to match your Deuce with an embroidered “H-D” logo. Includes all necessary mounting hardware. Seat width is 14.0"; passenger pillion width is 11.0". Combine with the Touring Passenger Backrest Pad for Softail Deuce P/N 52050-00 for additional passenger comfort.

51112-00A Fits ’00-later FXSTD models. $259.95

Shown with:

TOURING PASSENGER BACKREST PAD FOR SOFTAIL DEUCE MODELS

Together with the Touring Seat for Softail Deuce P/N 51112-00, this backrest passenger pad provides additional support for the long haul with a wide radius backrest.

52050-00 Fits ’00-later FXSTD models

B. SOFTAIL TWO-UP CUSTOM SEAT* WITH SNAKESKIN PRINT

The edgy, custom snakeskin print fits your style, the contoured shape fits you and a passenger. Includes embroidered “H-D” Flying Wheel logo. Seat width

14.0", pillion width 6.5".

52850-00 Fits all ’00-later

equipped with Passenger Sissy Bar Upright P/N 51114-00. $64.95

Softail models (except FLSTS and FXSTD). $239.95

A. SUNDOWNER TOURING SEAT FOR SOFTAIL DEUCE MODELS

C. SOFTAIL TWO-UP CUSTOM SEAT*

A textured rider area and sculptured shape for added support set this seat apart from the crowd. Kit includes passenger grab strap. Recommended passenger backrests are P/N 52517-94 (short rail), 52965-98 (tall) and 52612-95 (low). Seat width 15.0"; Passenger Pillion width 4.5".

52850-97 Fits ’84-’99 Softail

models (except FLSTS). $239.95

B. SOFTAIL TWO-UP CUSTOM SEAT WITH SNAKESKIN PRINT

*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.

Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.

C. SOFTAIL TWO-UP CUSTOM SEAT

+ 90 hidden pages