Harbor Freight Tools Universal Bench Grinder Stand Product manual

BENCH GRINDER STAND

®

Model 03184

ASSEMBLY and OPERATING

INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

Copyright © 2002 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools .

For technical questions and replacement parts, please call 1-800-444-3353

Specifications

Overall Height 32”
Base Dimensions 18-7/8” x 19-3/4”
Seat Dimensions 7-7/8” x 8-3/4”
Tool Tray Dimensions 1-15/16” Deep x 12-1/2” x 13-3/8”
Weight 19.15 Lbs.
Mounting Holes .47” X .78” - Fits Harbor Freight Tools

Grinders #39797, #39798, #37822, #37823

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using the Grinder Stand, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this Grinder Stand!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use the Grinder Stand in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do not let
them play with the Grinder Stand or the attached grinder (not included).

4. Store idle equipment. When not in use, the Grinder Stand must be stored in a dry
location to inhibit rust. Always lock up the Grinder Stand and the attached grinder (not
included).

5. Use the right product for the job. Do not attempt to force a small product or

attachment to do the work of a larger industrial product. There are certain
applications for which this product was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
product and do not use this product for a purpose for which it was not intended.

6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.

7. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI
approved dust mask or respirator when working around metal, wood, and chemical
dusts and mists.

SKU 03184

Page 2