Harbor Freight Tools Three Trumpet 12V Air Horn Set With Compressor Product manual
12 VDC AIR HORNS
WITH COMPRESSOR
94862
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may
differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our W eb site at http://www.harborfreight.com
Copyright © 2006 by Harbor Freight Tools®. All rights reserved. No por tion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight T ools .
For technical questions and replacement parts, please call 1-800-444-3353
Specifications
Power Requirement 12 VDC, 10 watts, 8 ohms
Horn Sizes Bell mouth: 3” and 2-7/8”; Length: 5-3/4”, 6-
Horn Material Plastic, Red; Brass diaphragm
Sound 135 dB, high/low bla s t ; Ton es : high, medium,
Air Source Compressor, electric (supplied)
Wire 14-16 AWG auto wire
Weight 2.95 lbs.
Item Description
3/8” and 8-1/2”
low, and music
Save This Manual
You will need the manual for the saf ety warnings and precautions, assemb ly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this man ual. Write the invoice number on the inside of the front
cover. Keep the manual and in v oice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or pow er tools in
damp or wet locations. Don’t e xpose to r ain. Keep work area well lighted.
Do not use electrically powered tools in the presence of flammable gases or
liquids.
3. Keep children away. Children must never be allow ed in the work area. Do
not let them handle machines, tools, or extension cords .
4. Use the right product for the job. There are certain applications for which
this product was designed. It will do the job better and more safely at the rate
for which it was intended. Do not modify this product and do not use for a
purpose for which it was not intended.
5. Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protectiv e, electrically non-conductiv e clothes and non-skid
footwear are recommended when working. Wear restrictive hair cov ering to
contain long hair.
6. Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across running machines.
SKU 94862 For technical questions, please call 1-800-444-3353 Page 2
7. Check for damaged parts. Before using this product, an y part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Chec k f or any other condition that
may affect proper oper ation. Any part that is damaged should be properly
repaired or replaced by a qualified technician. Do not use the product if the
switch does not turn On and Off properly.
8. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this product. Appro v ed accessories are
available from Harbor Freight Tools.
9. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels if taking prescription medicine to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not operate
this product.
Note: Performance of this tool may vary depending on variations in battery power.
Product Specific Safety Precautions
Warning: The brass components of this product contain lead, a chemical known
to the State of California to cause birth defects (or other reproductive harm).
(California Health & Safety Code 25249.5 et seq.)
1. During installation, remove ignition ke ys from the v ehicle and set the parking
brake.
2. Only connect the positive (+) hot lead to a fused terminal or circuit.
3. A v oid short circuits or burns. Do not wear rings, watches, or other metallic
objects around your hands and arms.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but m ust be supplied by the operator.
Warning: P eople with pacemakers should consult their ph ysician(s) before using
this product. Electromagnetic fields in close pro ximity to a heart pacemaker could
cause interference to or failure of the pacemak er .
Unpacking
When unpacking, check to make sure the f ollowing parts are included. Ref er to the
Parts List and Parts Photo at the end of this manual. If an y parts are missing or
broken, please call Harbor Freight Tools at the number on the cov er of this manual.
SKU 94862 For technical questions, please call 1-800-444-3353 Page 3
Loading...