Harbor Freight Tools Steel Lever Barrel Pump Product manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

STEEL LEVER PUMP

Visit our website at: http://www.harborfreight.com

REV 13h

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Email our technical support at: tech@harborfreight.com

ITEM 3352

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Specifications

Fits 15 to 55 Gallon Drums, Mounting Threads 2″ NPT and 1-1/2″ NPT (Bung)

Discharge Spout 3/8″ Spout Thread 3/4″ (Standard garden hose thread) Delivery 11 ounces per stroke Suction Intake Diameter 7/8″ Suction Tube Length 18-1/8″ to 35″ Stroke Length 6-7/8″ Handle Length 12-3/8″ L x 1-1/4″ W

IMPORTANT SAFETY INFORMATION

Assembly Precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep assembly area clean and well lit.

Use Precautions

1. This product is not a toy. Do not allow children to play with or near this item.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during use.

3. Use as intended only. Only use pump for transferring lubricants, solvents, agricultural and industrial chemicals, additives, and non-corrosive liquids.

4. Inspect before every use; do not use if parts are loose or damaged.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.

6. Product capabilities apply to properly and completely assembled product only.

5. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

6. Follow fluid supplier’s instructions and MSDS for all fluids pumped.

7. The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.)

Page 2 For technical questions, please call 1-800-444-3353. Item 3352

+ 2 hidden pages