Harbor Freight Tools Roller Cabinet Side Tray Product manual

Specifications

Size Weight Capacity

16-7/8″ D x 18-1/4″ L 35 lb

Included Hardware

4 x M8x20 Bolts
4 x M8 Nuts

IMPORTANT SAFETY INFORMATION

Mounting Precautions

1. Mount only according to these instructions.
Improper mounting can create hazards.

2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during mounting.

Use Precautions

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.

2. This product is not a toy.
Do not allow children to play with or near this item.

3. Do not exceed weight capacity.

4. Use as intended only.

3. Keep work area clean and well lit.

4. Keep bystanders out of the area during mounting.

5. Do not mount when tired or when under the
influence of alcohol, drugs or medication.

5. Inspect before every use;
do not use if parts are loose or damaged.

6. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

Mounting Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.

1. If mounting to Tool Cart (95272 / 61427 / 69397):

a. Remove the four Nuts and Bolts from

the corners opposite the Handle.

b. Line up the Mounting Plate (See Figure B.)

with the holes, then secure the
Tray with the Bolts and Nuts.

2. If mounting to a different cart or

cabinet, pilot holes may need to be
drilled into mounting surface:

a. Using the Mounting Plate as a template, mark

locations of Mounting Holes on mounting surface.

b. Using a drill bit appropriate for the Bolts,

drill pilot holes into the marked locations.

c. Position the Mounting Plate so that

Mounting Holes align with pilot holes.

d. Thread Bolts through Mounting Holes and

into pilot holes, then secure with Nuts.

Mounting

Holes

Mounting

Plate

Figure B

Figure A

Page 2 For technical questions, please call 1-888-866-5797. Item 62207

Operation Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.

1. Lift up the Tray until it is high enough
for the Support to clear the Lip.

2. Rest the Support in the Lip, then push down
on the Tray to make sure it is fully seated.

Lip

Tray

Support

3. To fold down, lift up the Tray, remove

the Support from the Lip, then place the

Support and Tray in down position.

Hinge

Lip

Tray

Hinge

Support

Figure C

Maintenance and Servicing

Procedures not specifically explained in this manual must
be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged,
have the problem corrected before further use.

1. PERIODICALLY, inspect the general
condition of the Tray. Check for:

• loose hardware,

• misalignment or binding of parts,

• cracked or broken parts,

• any other condition that may

affect its safe operation.

2. Wipe Tray assembly with clean cloth.

3. Lubricate Hinges as needed.

Page 3For technical questions, please call 1-888-866-5797.Item 62207

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797