Harbor Freight Tools 96447 Owner's Manual
FLOOR INSTALLATION KIT
Model
96447
OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10i
SPECIFICATIONS
Pull Bar
Tapping Block
Spacer
Carbon Steel
11-7/8 L X 3-1/64” W X 1-19/32” H
Black Rubber
6-7/8” L X 2-19/64” W X 13/16” H
PVC (20 included)
2-23/64” L X 1-5/32” W X 9/32” H
Save This Manual
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Write the product’s serial number in the back of the manual near
the assembly diagram, or write month and year of purchase if product has no number.
Keep this manual and invoice in a safe and dry place for future reference.
SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
serious injury.
SAVE THESE INSTRUCTIONS
Keep your work area clean and well lit. 1. Clutter invites accidents.
Keep bystanders, children, and visitors away while working with this 2.
Installation Kit. Protect others in the work area from debris. Provide barriers or
shields as needed.
Stay alert. Watch what you are doing, and use common sense. Do not use 3.
this Installation Kit while tired or under the inuence of drugs, alcohol, or
medication. A moment of inattention may result in serious personal injury.
Do not overreach. Keep proper footing and balance at all times. 4. Proper
footing and balance enables better control in unexpected situations.
Always wear ANSI-approved safety goggles and heavy-duty work gloves 5.
when using the Installation Kit.
Maintain labels and nameplates on the tool.6. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
REV 08d; 10b
Page 2For technical questions, please call 1-800-444-3353.SKU 96447
Loading...