Harbor Freight Tools 96329, 96326, 96327, 96328 User Manual
GARAGE DOOR
THRESHOLD
Model 96326 - 8’
Model 96327 - 10’
Model 96328 - 16’
INSTALLATION INSTRUCTIONS
Adhesive shown is not included.
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in
the back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
GENERAL AND SPECIFIC SAFETY RULES
WARNING! Read all instructions. Failure to follow all instructions listed
below may result serious injury.
SAVE THESE INSTRUCTIONS
1.
2.
3.
4.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Personal safety
Inspect this Threshold often. Repair or replace if needed.
a.
Always wear ANSI-approved safety goggles during installation of this product.
b.
Use this Threshold only for intended purpose.
c.
Stay alert, watch what you are doing and use common sense when installing.
d.
Do not install while you are tired or under the inuence of drugs, alcohol or
medication. A moment of inattention may result in serious personal injury.
Do not overreach. Keep proper footing and balance at all times.
e.
Keep out of reach of children.
f.
Maintain labels and nameplates. These carry important safety information. If
unreadable or missing, contact Harbor Freight Tools for a replacement.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Page 296526/27/28 For technical questions, please call 1-800-444-3353.
Loading...