Harbor Freight Tools 95365 User Manual

BICYCLE WORKSTAND

Model

95365

®

150 LB. CAPACITY

ASSEMBLY AND OPERATION INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

ALL WARNINGS AND INSTRUCTIONS BEFORE USE.

Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

SPECIFICATIONS

Maximum Weight Capacity 150 Lbs.

Overall Dimensions 13-5/8” L X 12-1/8” W X 23” H

14 gauge steel support bracket, steel tubing with

Material

Seven Adjustment Positions
(distance from the ground)

black enamel finsh, thermoplastic hardware caps,
rubber support bracket cover

18-5/8”, 17-3/4”, 17”, 16-1/4”, 15-1/2”, 14-5/8”,
14”

You will need this manual for the safety warnings and precautions, assembly, oper­ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly dia­gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

1. Keep your work area clean and well lit. Cluttered benches and dark areas invite

accidents.

2. Keep bystanders, children, and visitors away while assembling and working with

the Workstand. Distractions can cause you to lose control.

3. Stay alert. Watch what you are doing, and use common sense when operating this

product. Do not use while tired or under the influence of drugs, alcohol, or medi-

cation. A moment of inattention while operating this product may result in serious

personal injury or property damage.

4. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Loose

clothes, jewelry, or long hair can be caught in parts of the Workstand and bicycle.

5. Keep proper footing and balance at all times. Proper footing and balance enables

better control of the Bicycle Workstand in unexpected situations.

6. Use safety equipment. Always wear eye protection. Always wear ANSI-approved

leather work gloves when working with the Workstand.

7.

Store the Bicycle Workstand out of reach of children and other untrained persons.

This product could be dangerous in the hands of untrained users.

8. Use only accessories that are recommended by the manufacturer for your model.

Accessories that may be suitable for one tool may become hazardous when used

on another tool.

9. Always check hardware and assembled parts after assembling. All connections

should be tight and hardware tightened.

11. Do not exceed the Bicycle Workstand maximum weight capacity of 150 Lbs. (evenly

distributed).

12. Never allow anybody to tamper with a bicycle while it is being supported on the

Workstand.

For technical questions, please call 1-800-444-3353.

Page 2SKU 95365