Harbor Freight Tools 95154 User Manual

IMITATION DOME CAMERA With LED

95154

ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork

contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight

Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual

product may differ slightly from the product described herein. Tools required for assembly and service may not

be included.

Revised Manual 09k

For technical questions or replacement parts, please call 1-800-444-3353.

SPECIFICATIONS

Batteries Required 1.5V DC “AA” Batteries (Qty. 2)

(not included)

Overall Dimensions 4-5/8” D X 3” H

Imitatio n C a me r a
Angle

Mounting Hole Spacing

360° Left/ Right Rotation
Fixed 45°

2.659” (67.59 mm) center to center

Unit Weight

.3 Lbs.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.

SAFETY WARNINGS AND PRECAUTIONS

WARNING: When using this product, basic safety precautions should always be followed
to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean and well lit. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use the Imitation Dome Camera in damp or wet
locations. Don’t expose to rain. Do not use electrically powered products in the presence
of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do not let them
handle the Imitation Dome Camera. This product is not a toy.

4. Use the right product for the job. Do not modify this product and do not use this product
for a purpose for which it was not intended.

5. Dress properly. Protective, electrically non conductive clothes and nonskid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.

6. Use eye protection. Always wear ANSI-approved impact safety goggles during
installation.

7. Maintain with care. Keep the Imitation Dome Camera clean for better and safer
performance.

For technical questions, please call 1-800-444-3353

Page 2SKU 95154