Harbor Freight Tools 95069 User Manual

®

70 LB. DIGITAL SCALE

95069

ASSEMBLY & OPERATING INSTRUCTIONS

Due to continuing improvement, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

Copyright© 2006 by Harbor F reight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please

complete the owner’s record below:

Model______________ Serial No.____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly .

Tec hnical Specifications

Material: Thermoplastic exterior shell and tray,

black rubber foot-pegs
Dimensions: 11-1/8” L X 9-1/4” W X 2-1/2” H
Power Source: Single 9-Volt batter y (included)/AC Adaptor

Class 2 Transformer;

AC input: 120V/60Hz (included)

Output: 9V 100 mA
Maximum Weight Capacity: 70 Lb ./32Kg

Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be follo wed to reduce
the risk of personal injury and damage to equipment.

Read all instructions before using this product!

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SA VE THESE INSTRUCTIONS

WORK AREA

1. Keep your work area clean and well lit. Cluttered benches and dark areas invite

accidents.

2. Do not operate the Digital Scale in explosive atmospheres, such as in the presence

of flammable liquids, gases, or dust. Electrical products create sparks which may ignite
the dust or fumes.

SKU 95069 For technical questions please call 1-800-444-3353. Page 2

ELECTRICAL SAFETY

3. Grounded products must be plugged into an outlet properly installed and grounded

in accordance with all codes and ordinances. Never remove the grounding prong or
modify the plug in any way. Do not use any adapter plugs. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded. If a

grounded prouct should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user.

4. Double insulated products are equipped with a polarized plug (one blade is wider

than the other). This plug will fit in a polariz ed outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug in any way.

Double insulation
grounded power supply system.

5. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and

refrigerators. There is an increased risk of electric shock if your body is grounded.

6. Do not expose the Scale to rain or wet conditions. Water entering the Scale will

increase the risk of electric shock.

eliminates the need for the three wire grounded power cord and

7. Do not abuse the Power Cord. Never use the Power Cord to carry the Scale or to

pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp
edges, or moving parts. Replace damaged Power Cords immediately. Damaged

Power Cords increase the risk of electric shock.

8. When operating the Scale outside, use an outdoor extension cord marked “W-A”

or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric
shock.

PERSONAL SAFETY

9. Stay alert. Watch what you are doing, and use common sense when operating the

Scale. Do not operate the Scale while tired or under the influence of drugs,
alcohol, or medication.

10. Store the Scale out of reach of children and other untrained persons. Electrical

products are dangerous in the hands of untrained users.

USE AND CARE

11. Do not use the Scale if the Power Switch does not turn it on or off. Any appliance

that cannot be controlled with the Power Switch is dangerous and must be replaced.

12. Disconnect the Power Cord before making any adjustments, changing the battery,

or storing the Scale. Such preventive safety measures reduce the risk of turning on
the product accidentally.

SERVICE

13. Scale service must be performed only by qualified repair personnel. Service or

maintenance performed by unqualified personnel could result in a risk of injury .

SKU 95069 For technical questions please call 1-800-444-3353. Page 3