Harbor Freight Tools 95069 User Manual

Digital Postal Scale

Item 95069

INSTRUCTIONS AND PRECAUTIONS

Visit our website at:

http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

When unpacking, make sure that the product is intact and undamaged.

If any parts are missing or broken, please call

1‑800‑444‑3353 as soon as possible.

Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this document
or any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools. Diagrams within this document may not be drawn
proportionally. Due to continuing improvements, actual product may differ slightly from the
product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1‑800‑444‑3353.

Manual Revised 11f

Email our tech support at: [e-mail]

Specications

Setup Instructions

Max. Capacity 70 LB. / 32 kg

Measurements Pounds / Kilograms

Shut‑Off 90‑second auto shut‑off

120V~, 60Hz / 9VDC,

Power Source

100mA Adapter
(included)
9V Battery (not included)

NOTE: Do not use scale for
commerce or trade.

Important Safety Information

1. Do not exceed Scale’s 70 LB.
/ 32 kg max. weight capacity.
“ERR” will appear on digital
display if scale is overloaded.

2. Position battery in proper polarity.

3. This product is not a toy.
Do not allow children to play
with or near this item.

4. Weight readings are for
household use only. Do not
use for commerce or trade.

5. Inspect before every use; do not
use if parts are loose or damaged.

Read the ENTIRE

IMPORTANT SAFETY
INFORMATION section
at the beginning of this
document including all text
under subheadings therein
before set up or use of
this product.

Note: Place Scale in sheltered area

when in use as air movement and
breathing on Scale will affect accuracy.

Installing/Replacing Battery

1. The Battery must be replaced
if a battery icon is displayed in
the LCD window. Gently push in
on the tab on the battery cover
and pull the battery cover up.

2. Unplug the battery connector from
the battery. Replace the dead
battery with a new 9V battery.

3. Snap the battery connection back
onto the top of the battery.

Using Adaptor

1. Plug the Adaptor plug into the
Adaptor jack located on the
Scale. Plug the Adaptor into
a 120V electrical outlet.

2. When done using Scale, unplug
the Adaptor plug from Digital
Scale. Unplug the Adaptor
from electrical outlet.

Page 2 For technical questions, please call 1‑800‑444‑3353. SKU 95069