Harbor Freight Tools 95059 User Manual
9” HID OFF-ROAD LIGHT
95059
INSTALLATION AND OPERATION INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Specifications
Construction
Power Requirement
High Impact Plastic Body with
Tempered Glass Lens, Polystyrene
Lens Guard
12 VDC, 3 A,
5A Fuse (included)
Bulb Color
Bulb Type
Total Weight
Light Dimensions
6-3/4” D x 9” W x 9-5/8” H
Blue
H7 6000 k
3.2 lb.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual.
Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe
and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using equipment, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before installing or using!
Keep your work area clean and well lit. 1. Cluttered benches and dark areas invite ac-
cidents.
Do not operate automotive accessories in explosive atmospheres, such as in the 2.
presence of flammable liquids, gases, or dust. Batteries and automotive accessories
may create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away from the installation area. 3. Distractions
can cause you to lose control. Protect others in the work area from debris such as corro-
sion materials and sparks. Provide barriers or shields as needed.
Do not abuse the Power Cord. Never use the Power Cord to carry the lights. Keep 4.
the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged
Power Cords immediately. Damaged Power Cords increase the risk of fire.
Stay alert. Watch what you are doing, and use common sense when operating a 5.
automotive accessory. Do not use a automotive accessory while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while operating a
automotive accessory may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your 6.
hair, clothing, and gloves away from moving engine parts. Loose clothes, jewelry, or
long hair can be caught in moving engine parts.
Use safety equipment. Always wear eye protection. 7. Dust mask, nonskid safety shoes,
hard hat, or hearing protection must be used for appropriate conditions. ANSI-approved
goggles and heavy work gloves should be worn during installation.
SKU 95059 For technical questions, please call 1-800-444-3353 Page 2
Use only with vehicles with 12 volt DC electrical systems.8.
Turn vehicle ignition off before making cable connections. 9. Vehicle’s engine must be
cooled down before making cable connections.
Disconnect the battery cables before installing Off Road lights or changing bulbs. 10.
Such preventive safety measures reduce the risk of accident.
Keep automotive accessory maintained and clean. 11. Do not use a damaged automotive
accessory. Tag damaged automotive accessories “Do not use” until repaired.
Avoid contact with Battery Acid. 12. If splashed, immediately wash affected area with clean
water and baking soda for at least 15 minutes. If irritation persists get medical help im-
mediately.
Connect Off Road Light cables to proper polarities. 13. Connect black cable to the negative
battery terminal, and the red cable to the positive battery terminal (For a negative grounded
system). Failure to do so could result in sparks, possible fire and severe personal injury.
Keep cables clear of fan blades, belts, pulleys, and other moving parts of the engine 14.
that may cause injury, or damage to the Off Road Light.
Do not allow the Black and Red battery cables or terminals to touch. 15. Failure to adhere
to these directions could result in severe personal injury. If this happens, sparks will occur
that can melt connection lugs, or other metal objects, and create the potential for fire.
Read all instructions and warnings on any battery or automotive electrical systems 16.
before working on vehicle.
Do not expose the battery or bare wires, switches or connections to rain or wet 17.
conditions.
To avoid damage of cable and plug, never pull the cable to disconnect the Fog 18.
Lights.
Always unplug the Off Road Light from their electrical connection and allow to 19.
cool completely before performing any inspection, maintenance, or cleaning pro-
cedures.
Repairs should be carried out only by a qualified technician.20.
An appropriate in-line switch and fuse are essential to help prevent fire in the event 21.
of a short circuit. These components are not included in this kit and will need to be pro-
vided by the customer.
This product contains or, when used, produces a chemical known to the State of 22.
California to cause cancer and birth defects or other reproductive harm. (California
Health & Safety Code § 25249.5, et seq.)
HID lamps emit ultraviolet, visible, and infrared radiation. HID bulbs operate at very high 23.
temperatures and pressures. Possible skin or eye irritation can result from exposures
exceeding 15 minutes. Do not stare at exposed lamp in operation. During operation, the
bulb should be enclosed in a housing to prevent injury. Do not remove bulb from equip-
ment until it has cooled completely. Never handle the bulb when it is operating or until it
has cooled!
SKU 95059 For technical questions, please call 1-800-444-3353 Page 3
Loading...