Harbor Freight Tools 91495 Owner's Manual
ROLLING
WORK SEAT
91495
ASSEMBLY INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools. Diagrams within this
manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09j
Specications
Construction Heavy-Duty Tube/Formed Steel w/Polypropylene Plastic Tray
Finish Green Powder Coated
Wheels Four 10” Dia. Pneumatic Tires w/Ball Bearing Wheels - 30 PSI
Seat Type Bucket /Tractor Type - 13-1/4” L x 17” W x 7-1/2” H
Overall Dimension 33” L x 17-1/2” W x 23” H
Tray Dimension 17” L x 15-1/2” W x 3” D
Overall Weight 30 Lbs.
Max. Weight Capacity
300 Lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual
and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When assembling and using this product basic safety precautions
should always be followed to reduce the risk of personal injury and damage to
equipment.
Read all instructions before using this product!
1. Keep work area clean. Cluttered areas invite injuries.
2. Keep children away. Children must never be allowed in the work area. Do not let
children play with this product. This is not a toy.
3. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear
are recommended when working with this product. Wear restrictive hair covering
to contain long hair.
4. Use eye and ear protection. Always wear ANSI approved impact safety goggles
when assembling this product.
5. Do not overreach. Keep proper footing and balance at all times when assembling
this product.
6. Replacement parts. When servicing, use only identical replacement parts. Use of
any other parts will void the warranty. Check for loose or worn parts before each
use.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
REV 07k
SKU 91495 For technical questions, please call 1-800-444-3353. Page 2
Loading...