Harbor Freight Tools 91311 User Manual

BATTERY OPERATED

®

BI-PLANE

91311

ASSEMBLY & OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Website at www.harborfreight.com

IMPORTANT:

If damage is caused due to a crash, your warranty is void.

Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

REV 10/05

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please

complete the owner’s record below:

Model

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.

WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

______________ Serial No._____________ Purchase Date_______________

Technical Specifications

Upper Wing Span: 15-7/8" L x 2-1/2" W
Bottom Wing Span: 14-3/8" L x 2-5/8" W
Fuselage: 12-3/8" L x 1-5/8" W x 3" H
Horizontal Tail: 6-3/4" L x 2-5/8" W
Tail Height: 3-1/4" H x 2-3/4" W
Also included: (1) spare propeller, (1) battery charger and glue.

The Bi-Plane charger requires 4 “AA” size batteries. Not included.

Safety Warnings and Precautions

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Keep work area well lit. Keep work area uncluttered and free
of debris. Cluttered areas invite injury.

3. Check for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.

4. Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.

5. Always check hardware and assembled parts after assembling. All connections should be
tight and hardware tightened.

6. Children should only be allowed to play with the Bi-Plane when closely supervised by a

responsible adult.

7. Store idle equipment. When not in use always lock up the Bi-Plane and keep it out of the
reach of children.

8. Dress properly. Wear restrictive hair covering to contain long hair.

9. Use eye protection. Always wear ANSI approved impact safety goggles when assembling
this product.

10. Maintain products with care. Keep the Bi-Plane in a dry location. Do not expose it to
prolonged moisture.

SKU 91311 For technical questions, please call 1-800-444-3353. Page 2