Harbor Freight Tools 91309 User Manual
UNDERWATER CAMERA
®
WITH MONITOR
91309
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No portion
of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Specifications
Battery Sealed, Lead Acid (with fuse)
Maximum Camera Depth 65 Feet (Length of Cable)
Overall Weight 11.85 Lbs.
Camera Dimensions 1-5/8” W x 7” L x 3-7/8” H
Camera Light Source Built-in Infrared LED Bulbs
Input Voltage 12 Volts DC
Camera Operating Temperature -20° to 120° F
Camera Angle-of-View 83° (horizontal), 60° (vertical)
Camera Depth-of-View 15” (approximate; in clear water)
Monitor Image Black and White
Monitor Picture Resolution 450 (TV Lines)
Monitor Input Voltage 11 to 15 Volts DC
Monitor Operating Temperature -20° to 120° F
Monitor Dimensions 6-1/16” W x 7-5/8” L x 6” H
*Note: Battery and Monitor not water-resistant and not for underwater use.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
General Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use the Battery (4) or Monitor (2) in damp or
wet locations. Don’t expose them to rain. Keep work area well lit.
3. Keep children away. Do not let them handle the Camera/Monitor system.
4. Store idle equipment. When not in use, the Camera/Monitor system must be stored
in a dry location to inhibit rust. Always lock up the Camera/Monitor system and keep
it out of reach of children.
5. Use the right product for the job. There are certain applications for which this
product was designed. Do not modify this product and do not use this product for a
purpose for which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
cables. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
7. Use eye protection. Always wear ANSI approved impact safety goggles during
setup, maintenance, and whenever handling the Battery (4). If working near water,
wear a life vest and use other appropriate safety gear, if necessary.
8. Do not overreach. Keep proper footing and balance at all times.
REV 03/05
Page 2SKU 91309 For technical questions, please call 1-800-444-3353.
9. Maintain products with care. Keep products clean for better and safer performance.
Follow instructions for changing accessories. Inspect cords periodically, and if
damaged, have them repaired by an authorized technician.
10. Disconnect power. Unplug the system when not in use.
11. Stay alert. Watch what you are doing, use common sense. Do not operate any
product when you are tired.
12. Check for damaged parts. Before using any product, any part that appears
damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for any broken parts or mounting fixtures, a
leaking battery, loose connections, damaged seals on the Camera, and any other
condition that may affect proper operation. Any part that is damaged should be
properly repaired or replaced by a qualified technician. Do not use the product if any
switch does not turn On and Off properly.
13. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this product. Approved accessories are available from Harbor
Freight Tools.
14. Do not operate product if under the influence of alcohol or drugs. Read warning
labels if taking prescription medicine to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the product.
15. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
16. Pacemaker Warning. People with pacemakers should consult their physician(s)
before using this product. Electromagnetic fields in close proximity to a heart
pacemaker could cause interference to or failure of the pacemaker.
Note: Performance of this product may vary depending on battery power.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure the parts listed on page 7 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
Page 3SKU 91309 For technical questions, please call 1-800-444-3353.
Loading...