Harbor Freight Tools 90976 User Manual

ITEM

90976

For technical questions and replacement parts, please call 1-800-444-3353.

Thank you for choosing a Harbor Freight Tools product.

Save the receipt and these instructions. It is important that you read this

entire instruction sheet to become familiar with these products before you begin using them.

Technical Specifications

MAX. RPM = 12,500

made from crimped carbon steel wire, are to be used with an appropriate angle grinder. They can be used for roughening, deburring, cleaning prior to welding, rust and paint removal, and weld spatter and corrosion removal.

Safety Warnings and Instructions

/8”x 11 TPI Arbor

These wheels and brushes,

Grinder Brush Kit

(7 Pieces)

3491 Mission Oaks Blvd., Camarillo, CA 93011

x"3-21/4"eriWdettonKhsurBpuC "3x -21/4"eriWdepmirChsurBpuC "4x3/4"tsiwTelbaCleehWeriW "4x3/4"daeBregnirtSleehWeriW

retpadA52.1-01Mot" retpadA05.1-01Mot"

hsurBeriWwoR61x4

eldnaHdooWhtiw

:gniwollofehtsedulcnitesehT

1. Always wear ANSI appro ved safety goggles, full face shield and respirator when working with these tools.

2. BEFORE use, read and adhere to all warnings, safety precautions, and operating instructions in the owner’s manual f or the appropriate angle grinder these accessories are to be used with.

2. The brush and wheel bristles are very sharp and can easily cause skin cuts and puncture wounds; be e xtemely careful when unpacking these products and when handling and using the wheels and brushes. Always wear gloves when handling and using these wire brushes.

3. Exposure to aluminum o xide (a dust generated from material removing processes) can result in eye , skin and breathing irritation. Alw ays use a NIOSH (National Institute for Occupational Safety and Health) approved respirator and safety goggles. Avoid skin exposure. Proper ventilation in the work area is required.

4. Never e xceed the 12,500 RPM maxim um.

SA VE THESE WARNINGS.

01/04

Made in China.