Harbor Freight Tools 90725 User Manual
Mini Laser Level with TMini Laser Level with T
Mini Laser Level with T
Mini Laser Level with TMini Laser Level with T
90725
ASSEMBLY AND OPERATING INSTRUCTIONS
ripodripod
ripod
ripodripod
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2003 by Harbor Freight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
90725 Laser Level.P65 10/13/03, 9:06 AM1
Specifications
Material: All ABS body with
aluminum end fittings
Tripod: Aluminum swivel head
zinc plated legs
Lockable swivel head
Adjustability: 360 degrees
Features: On/Off switch
Power: (3) 1.5v AG13 button
cell batteries included
Dimensions: 7-5/8”l x 1”w x 2-1/8”h
Levels: (3) Liquid filled vials:
Horizontal, Vertical, and
45 degree
Working Range: Approx. 36’
Laser Dot: 1/4” OD @ approx. 36’
350 nm wavelength
F.D.A. certification number 0310895-00
Laser Class II
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use this tool in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use in
the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tool must be stored in a dry location
to inhibit rust. Always lock up tool and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
SKU 90725 Page 2
90725 Laser Level.P65 10/13/03, 9:06 AM2
Loading...