Harbor Freight Tools 90582 User Manual

PORTABLE 5 GAL. OIL DRAIN DOLLY

MODEL 90582

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http//www.harborfreight.com

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions, please call 1-800-444-3353.

PRODUCT SPECIFICATIONS

Item Description

M axim um Holding Capacity 5 G allons. Funnel Dim ensions 14” Diameter x 4” Deep.

1-1/4” Diam eter D rain.

Tank Dim ensions 11-1/2” Diam eter x 13” High.

3-1/2” Long Handle. 1-1/2” Diam eter P our Spout.

Tube Size 1-1/2” O.D. x 18” Long. Adjustable Height 5’ 7” M axim um Height / 3’ 4” M inimum H eight. W aste Drain D im ensions 1-5/8” O.D. Weight 12.40 Pounds.

SA VE THIS MANU AL

You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

UNPACKING

When unpacking, check to mak e sure all the parts shown in the Parts List on page 7 are included. If an y parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

GENERAL SAFETY WARNINGS AND PRECAUTIONS

1. Keep work area clean and dry. Cluttered, damp, or wet work areas invite inju- ries.

2. Keep children away from work area. Do not allow children to handle this product.

3. Store idle equipment. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children.

SKU 90582 PAGE 2

4. Do not use this product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.

5. Use eye protection. Wear ANSI approved safety impact eye goggles when using this product. ANSI approved safety impact eye goggles are available from Harbor Freight Tools.

6. Dress safely. Do not wear loose clothing or jewelry, as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts.

7. Do not overreach. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etcetera.

8. Industrial applications must follow OSHA requirements.

9. Stay alert. Watch what you are doing at all times. Use common sense. Do not use this product when you are tired or distracted from the job at hand.

10. Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts immediately.

11. Replacement parts and accessories: When servicing, use only identical replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools.

12. Maintain this product with care. Keep this product clean and dry during storage for better and safer performance. For your safety, service and maintenance should be performed regularly by a qualified technician.

13. Use the right equipment for the job. Do not attempt to force small equipment to do the work of a larger industrial tool. There are certain applications for which this equipment was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this equipment, and do not use this equipment for a purpose for which it was not intended.

14. WARNING! The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors, which cannot be built into this product, but must be supplied by the operator.

SKU 90582 PAGE 3

+ 4 hidden pages