Harbor Freight Tools 90048 User Manual

MINI SPOTLIGHT

WITH MAGNET, 12 VOLT

90048

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

Copyright © 2003 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Specifications

Spotlight Dimensions 3” Dia. x 2-3/4” L
Bulb 10 Watt
Weight .30 Lbs
Power Source 12 V Cigarette Lighter/Adapter
Power Cord 9’ 4”

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using this product, basic safety precautions should always be fol­lowed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do not let
them handle the Spotlight.

4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up the Spotlight and keep out of reach of children.

5. Use the right product for the job. Do not attempt to force a small tool to do the work
of a larger industrial product. There are certain applications for which this product was
designed. It will do the job better and more safely at the rate for which it was intended.
Do not modify this product and do not use this product for a purpose for which it was
not intended.

6. Use eye protection. Always wear ANSI approved impact safety goggles when
working with tools and equipment.

7. Do not overreach. Keep proper footing and balance at all times.

8. Maintain tools with care. Keep the Spotlight clean for better and safer performance.
Follow instructions for changing accessories. Inspect cord periodically and, if
damaged, have it repaired by an authorized technician. The magnet must be kept
clean, dry, and free from oil and grease at all times.

Page 2SKU 90048