Harbor Freight Tools 807, 239, 2696, 808 User Manual

TORQUE WRENCH
00239 00807 00808 02696
ASSEMBLY AND OPERATING INSTRUCTIONS
Model 00239, 1/2” Drive Torque Wrench shown above.
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury. SAVE THIS MANUAL.
Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10i
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Keep this manual and the receipt in a safe and dry place for future reference.
IMPORTANT SAFETY
INFORMATION
In this manual, on the labeling, and all other information provided with this product:
This is the safety alert
symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER indicates
a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates
a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION, used
with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to
address practices not related to personal injury.
CAUTION, without
the safety alert symbol, is used to address practices not related to personal injury.
WARNING Read all safety
warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
The warnings, cautions, and 1. instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Wear ANSI-approved safety goggles 2. and heavy-duty work gloves during use.
Use only within rated torque range. 3. Do not use for loosening.
Use as intended only. Do not use 4. as hammer or pry bar. Do not use handle extension to increase force. Do not drop.
Inspect before every use; do not use 5. if damaged or parts loose.
Keep away from children.6.
For your safety, service, calibration, 7. and maintenance should be
performed regularly by a qualied
technician.
Use only sockets with the correct 8. drive and rated to at least the torque that will be applied to it.
Wrenches
Page 2For technical questions, please call 1-800-444-3353.Torque
Loading...
+ 2 hidden pages