Harbor Freight Tools 7421 Product manual

3" Swivel Vise

Item 7421

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

When unpacking, make sure that the product is intact and undamaged.

If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.

Visit our website at: http://www.harborfreight.com

Email our technical support at: [e-mail]

Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape

or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

Revised Manual 11f

SAVE THIS MANUAL

You will need the manual for the safety warnings and
precautions, operating and maintenance procedures,
parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside
of the front cover. Keep the manual and invoice
in a safe and dry place for future reference.

IMPORTANT SAFETY INFORMATION

1. Mount only according to these instructions.
Improper mounting can create hazards.

2. Keep work area clean and well lit.

3. Keep bystanders out of the area during use.

4. This product is not a toy. Do not allow
children to play with or near this item.

5. Use for intended purposes only.

6. Inspect before use; do not use if
parts are loose or damaged.

7. Maintain product labels and nameplates.
These carry important safety information. If
unreadable or missing, contact Harbor
Freight Tools for a replacement.

8. Before drilling holes, check for hidden
utility lines in drilling path.

9. DO NOT USE THIS PRODUCT IF UNDER THE

INFLUENCE OF MEDICATION, ALCOHOL
OR DRUGS. Read warning labels on

prescriptions to determine if your judgement

or reexes are impaired while taking drugs.

If there is any doubt, do not use this product.

10. USE EYE AND HAND PROTECTION.
Wear ANSI-approved safety impact goggles
and heavy-duty work gloves during use.

11. DRESS SAFELY. Do not wear loose clothing or
jewelry as they can become caught in moving parts.
Wear a protective hair covering to prevent long
hair from becoming caught in the moving parts.

12. WHEN WORKING WITH THE ANVIL (6), DO
NOT STRIKE WITH A HARDENED TOOL.
It could chip the Anvil and/or the tool.

13. DO NOT OVERREACH. Keep proper
footing and balance at all times.

14. STAY ALERT. Watch what you are doing
at all times. Use common sense. Do not
operate this product when you are tired.

15. Damage could occur to your vise and/or
workpiece if you overtighten the Handle (5).

16. CHECK FOR DAMAGED PARTS. Before using
this product, carefully check that it will operate
properly and perform its intended function. Check
for damaged parts and any other conditions
that may affect its operation. Replace or repair
damaged or worn parts immediately.

17. REPLACEMENT PARTS AND ACCESSORIES.
When servicing, use only identical replacement parts.

18. MAINTAIN PRODUCT WITH CARE. Keep this
product clean and dry, and moving parts lightly
lubricated for better performance. Keep the Handle
dry, clean and free from oil, grease, and solvents.

19. USE THE RIGHT PRODUCT FOR THE RIGHT JOB.
Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. Do not
modify this tool and do not use this tool for any
purpose other than which it was intended.

SAVE THESE

INSTRUCTIONS.

SPECIFICATIONS

Base 360° Swivel Base

Jaw Opening 2-1/2 IN. Maximum

Anvil Size 2-7/8 IN. L x 2-7/8 IN. W

Base 4-7/8 IN. x 4-7/8 IN.

Overall 10-1/4 IN. L x 4-7/8 IN. W x 5-1/4 IN. H

SKU 7421 For technical questions, please call 1-800-444-3353. Page 2