Harbor Freight Tools 69869 Product manual

Specifications

Electrical Requirements 12 VDC
Connector 4-way Flat

Page 2 For technical questions, please call 1-888-866-5797. Item 69869

Important Safety Information

1. Observe posted speed limits to
prevent lights from blowing off.

2. Securely attach lights to
vehicle before moving.
Loose lights are a traffic hazard.

3. Thoroughly test vehicle lights
and tow lights before use.

4. Mount lights in proper orientation.
Amber lights must face forward and red
lights must face backward. Improper
orientation can confuse or distract
drivers, causing a traffic hazard.

5. Install on a 12VDC negative ground
circuit only. Installing on different
circuit can result in electric shock,
fire, or property damage.

6. Turn off vehicle and set the parking
brake before installation or testing.

7. Do not use on marine trailers
(such as boat trailers). Not waterproof.

8. Wear ANSI-approved impact safety
goggles and heavy-duty work gloves
during installation and use.

9. Do not modify the Towing Light Kit and
do not use the Towing Light Kit for a
purpose for which it was not intended.

10. Inspect before use; do not use if parts
are loose or damaged. Inspect wires
and connections for insulation damage
or loose wires and repair before use.

11. People with pacemakers should
consult their physician(s) before use.
Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference
or pacemaker failure.

12. WARNING: Handling the cord
on this product will expose you
to lead, a chemical known to
the State of California to cause
cancer, and birth defects or other
reproductive harm. Wash hands
after handling. (California Health &
Safety Code § 25249.5, et seq.)

13. This product is not a toy. Keep it
out of reach of children.

14. Check light position and function
regularly when towing, especially
on rough or uneven surfaces, or
in windy conditions. The magnets
may loose their grip on the vehicle
under extreme circumstances.

15. The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may
occur. It must be understood by the
operator that common sense and
caution are factors which cannot
be built into this product, but must
be supplied by the operator.

SAVE THESE INSTRUCTIONS.

Page 3For technical questions, please call 1-888-866-5797.Item 69869