Harbor Freight Tools 69626 Product manual
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the
product’s serial number in the back of the manual near the assembly
diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
IMPORTANT SAFETY INFORMATION
In this manual, on the labeling, and all other information provided with this product:
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
DANGER
WARNING
CAUTION
NOTICE
CAUTION
DANGER indicates a hazardous
situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety
alert symbol, indicates a hazardous
situation which, if not avoided, could
result in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
CAUTION, without the safety alert
symbol, is used to address practices
not related to personal injury.
SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result
in electric shock, re, and/or serious injury.
SAVE THESE INSTRUCTIONS
1. Obey all applicable regulations regarding installation and use.
Observe posted speed limits to prevent lights from blowing off.
2. Securely attach lights to vehicle before moving.
Loose lights are a trafc hazard.
Page 2SKU 69626 For technical questions, please call 1-888-866-5797.
3. Thoroughly test vehicle lights and tow lights before use.
4. Mount lights in proper orientation. Amber lights must face
forward and red lights must face backward. Improper orientation
can confuse or distract drivers, causing a trafc hazard.
5. Install on a 12 V negative ground circuit only. Installing on different
circuit can result in electric shock, re, or property damage.
6. Turn off vehicle and set the parking brake before installation or testing.
7. Do not use on marine trailers (such as boat trailers). Not waterproof.
8. Wear ANSI-approved impact safety goggles and heavy-
duty work gloves during installation and use.
9. Do not modify the Towing Light Kit and do not use the Towing
Light Kit for a purpose for which it was not intended.
10. Inspect before use; do not use if parts are loose or damaged. Inspect wires
and connections for insulation damage or loose wires and repair before use.
11. People with pacemakers should consult their physician(s) before
use. Electromagnetic elds in close proximity to heart pacemaker
could cause pacemaker interference or pacemaker failure.
12. WARNING: Handling the cord on this product will expose you to
lead, a chemical known to the State of California to cause cancer,
and birth defects or other reproductive harm. Wash hands after
handling. (California Health & Safety Code § 25249.5, et seq.)
13. This product is not a toy. Keep it out of reach of children.
14. Check light position and function regularly when towing, especially
on rough or uneven surfaces, or in windy conditions. The magnets
may loose their grip on the vehicle under extreme circumstances.
15. Remove conductive articles (such as metal jewelry, watches, and other
items) before installing light kit. Conductive objects can cause an
electrical short resulting in re, property damage, or personal injury.
16. The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Page 3SKU 69626 For technical questions, please call 1-888-866-5797.
Loading...