Harbor Freight Tools 69619 Owner's Manual
Inner Tie Rod
Removal Set
Item 69619
INSTRUCTIONS AND
PRECAUTIONS
Visit our website at:
http://www.harborfreight.com
Read this material before
using this product.
Failure to do so can result
in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the
product is intact and undamaged.
If any parts are missing or broken,
please call 1-800-444-3353
as soon as possible.
Copyright© 2011 by Harbor Freight Tools®.
All rights reserved. No portion of this document
or any artwork contained herein may be
reproduced in any shape or form without the
express written consent of Harbor Freight
Tools. Diagrams within this document may
not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly
from the product described herein. Tools required
for assembly and service may not be included.
For technical questions or replacement
parts, please call 1-800-444-3353.
Specications
For use with rack and
pinion assemblies on front
wheel drive vehicles.
Applications
Crowfoot
Wrench Sizes
Not for use with
“Saginaw” type rack and
pinion assemblies.
For hand use only. Not
for use with power tools
(impact wrenches, etc.)
S.A.E. 1-3/16”, 1-1/4”, 1-7/16”
Metric: 14mm, 17mm, 33.6mm
Important Safety Information
General Safety Rules
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Keep children and bystanders away
while using this product. Distractions
can cause you to lose control.
3. Stay alert, watch what you are
doing and use common sense when
using this product. Do not use this
product while you are tired or under
the inuence of drugs, alcohol or
medication. A moment of inattention
while using this product may result
in serious personal injury.
4. Use safety equipment. Always wear
eye protection. Safety equipment
such non-skid safety shoes, hard
hat, or heavy duty work gloves
used for appropriate conditions
will reduce personal injuries.
5. Do not overreach. Keep proper
footing and balance at all times.
This enables better control of this
product in unexpected situations.
6. Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
3. Do not force this product. Use the
correct product for your application.
The correct product will do the
job better and safer at the rate
for which it was designed.
4. Store this product out of the reach
of children and do not allow people
unfamiliar with the product or these
instructions to operate the product.
This product could be dangerous
in the hands of untrained users.
5. Maintain this product. Check for
misalignment or binding of parts,
breakage of parts and any other
condition that may affect the
product’s operation. If damaged,
have this product repaired before
use. Many accidents are caused
by poorly maintained equipment.
6. Use this product in accordance with
these instructions and in the manner
intended for this particular type of
product, taking into account the
working conditions and the work to
be performed. Use of this product for
operations different from those intended
could result in a hazardous situation.
Specic Safety Instructions
1. Maintain labels and nameplates
on the Inner Tie Rod Tool. These
carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
2. Wear ANSI-approved safety
goggles and heavy duty work
gloves when using this product.
3. Prior to servicing a vehicle, turn off
the vehicle’s engine and refer to
the vehicle manufacturer’s service
and repair manual for instructions
on how to safely secure the vehicle
in place with jacks, stands, etc.
4. The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may
occur. It must be understood by the
operator that common sense and
caution are factors which cannot
be built into this product, but must
be supplied by the operator.
Page 2 For technical questions, please call 1-800-444-3353. SKU 69619
Loading...